-
Notifications
You must be signed in to change notification settings - Fork 1
Solo Pong-like arcade game for Meadow and Hack Kit Pro
License
Lee-A-N/Solo-Pong-Game
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
Folders and files
Name | Name | Last commit message | Last commit date | |
---|---|---|---|---|
Repository files navigation
Solo Pong is a small arcade game for the Meadow F7 with Hack Kit Pro or similar hardware. - It uses a rotary encoder for paddle movement. Press the encoder knob for game start/restart. - It uses the ST7789 LCD display - A 3-position On/Off/On SPDT switch is used for setting the volume level (Mute, Soft, or Normal) - The piezo speaker is used for sound effects One point is scored each time the ball hits the paddle. The game gets more difficult as it progresses. The paddle shrinks each time the ball hits the paddle until a minimum size is reached. Subtle changes are made to the direction of the ball following each surface hit. For paddle hits, the angle change is different depending on where the ball strikes the paddle. Enjoy! Hardware: Meadow F7 board, Rotary Encoder, 3-position SPDT On/Off/On switch, ST7789 LDC display, Piezo speaker, 0.1 microFarad capacitor, 2 10K resistors All of the hardware is include in the Pro Hack Kit. Wiring: SPDT 3-position On/Off/On switch (used for volume settings Mute/Soft/Normal): top - 10K resistor to ground, pin D03 middle - Vcc bottom - 10K resistor to ground, pin D04 Rotary Encoder: CLK - pin D10 DT - pin D09 SW - 0.1 microFarad capacitor to ground, pin D08 + - Vcc GND - Ground Piezo Speaker: Red: Pin D07 Black: Ground ST7789 Display: GND: Ground VCC: Vcc SCL: SCK SDA: MOSI RES: Pin D00 DC: Pin D01 ------------------------------------------ NuGet Packages needed: Meadow.Foundation Meadow.Foundation.Displays.TftSpi
About
Solo Pong-like arcade game for Meadow and Hack Kit Pro
Topics
Resources
License
Stars
Watchers
Forks
Releases
No releases published
Packages 0
No packages published