library for reading differential pressure / gauge sensors from the manufacturer NXP. With pressure return in KPA, PSI, BAR, CMH2O quantities.

https://www.nxp.com/products/sensors/pressure-sensors:DRSNSPRSSR

• Call the library and create a Pressure object, containing at least the address of the analog port to which the sensor is located.

#include "Pressure.h"

Pressure Sensor(A0,MXP5010);

Or with the help of a multimeter take the operating voltage from the microcontroller to calibrate the sensor:

#include "Pressure.h"

Pressure Sensor(A0, MXP5010, 4.85);

• Insert the Init () function in the arduino setup

void setup(){
Sensor.Init();
}

• Use Get(MODEL,TYPE OF PRESSURE MEASUREMENT) to obtain the pressure value. Do this by entering two information 1- Sensor model and 2 - response magnitude.

void loop(){
float value = Sensor.Get(BAR);
}

legend:
👍 is runing,
👎 removed, 
💻 in development

• Leandro L. (library developer)
• Jessica Santos (mathematical modeler)
• Valdioleno (electronic validation)
• Rafael (insert TF of sensors)