Reverse engineered commands based on my first discovery for the TM-D710. https://github.com/LA3QMA/TH-D72-Kenwood/wiki
https://kenwood-radios.groups.io/g/main/messages and https://kenwood-radios.groups.io/g/TH-D72
Available Control commands: (Firmware V1.10)
- ID Radio Model
- AE Radio serialnumber
- FV Firmware version
- TY Radio Type
- DL Dual Band Mode/Single Band Mode
- MR Memory channel
- ME Memory channel, frequency, offset etc
- FO VFO channel
- BC PTT and CTRL Band
- VM Memory/VFO
- DW Emulates the Microphone Down Key
- UP Emulates the Microphone Up Key
- PC Output power
- SQ Squelch status
- BY Squelch open/closed
- RX Receive
- TX Transmit
- BT Burst tone
- RT Time
- GP Internal GPS
- GM Radio/GPS
- TN TNC status
AS Reverse- removed in Firmware V1.08- CS Callsign
- MS Power on text
- SR Reset
- CC CALL channel
- LK Key Lock
- PV Programmable VFO
- MN Memory name
- MS Power on message
- TT Transmit tone
CD Channel status- removed in Firmware V1.08- DM DTMF memory
- SS S-meter squelch - have to check parameters
- DT DTMF
- BA Battery type
- BL Backlight
- MU Menu
- TC TNC controll mode
- TS TNC controll mode 2
- PROGRAM 0M PROGRAM : Enters MCP programming mode (Command is: ZERO MIKE space PROGRAM)
- SERVICE 0G KENWOOD : Enters service mode (Command is: ZERO GOLF space KENWOOD)