An automated staker for PoS assetchains. Please see https://docs.komodoplatform.com/komodo/assetchain-params.html#ac-staked for details on pos64 POS implementation.

This is a work in progress. We aim to make this easy to use and as "set and forget" as possible. Please feel free to contribute code and ideas.

Currently, this will maintain a static number of UTXOs. This is important because a staking wallet can become very bloated over time. The block reward of any staked blocks will be combined with the UTXO used to stake the block.

sudo apt-get install python3-dev
sudo apt-get install python3 libgnutls28-dev libssl-dev
sudo apt-get install python3-pip
pip3 install setuptools
pip3 install wheel
pip3 install base58 slick-bitcoinrpc

komodod installed with your assetchain running.

The following examples will use CFEK. Replace CFEK with the chain you are using.

git clone https://github.com/StakedChain/pos64staker

cd pos64staker

./genaddresses.py

Please specify chain:CFEK

This will create a list.json file in the current directory. THIS FILE CONTAINS PRIVATE KEYS. KEEP IT SAFE. Copy this file to the directory komodod is located.

cp list.json ~/komodo/src/list.json

./sendmany64.py

Please specify chain:CFEK
Balance: 1000000.77
Please specify the size of UTXOs:10
Please specify the amount of UTXOs to send to each segid:10

Please take note of what this is actually asking for. The above example will send 6400 coins total. It will send 100 coins in 10 UTXOs to each of the 64 segids. Will throw error if your entered amounts are more than your balance. Will tell you how much avalible you have for each segid.

You now need to start the daemon with -blocknotify and -pubkey set.

Fetch a pubkey from your list.json and place it in your start command. For example:

./komodod -ac_name=CFEK -ac_supply=1000000 -ac_reward=10000000000 -ac_cc=2 -ac_staked=50 -addnode=195.201.20.230 -addnode=195.201.137.5 -pubkey=0367e6b61a60f9fe6748c27f40d0afe1681ec2cc125be51d47dad35955fab3ba3b '-blocknotify=/home/<USER>/pos64staker/staker.py %s CFEK'

NOTE the CFEK in -blocknotify make sure you change this to the correct chain name you are using also note the single quotes.

After the daemon has started and is synced simply do komodo-cli -ac_name=CFEK setgenerate true 0 to begin staking.

on block arrival:

getinfo for -pubkey

setpubkey for R address

check coinbase -> R address

if yes check segid of block.

if -1 send PoW mined coinbase to :

    listunspent call ... 

    sort by amount -> smallest at top and then by confirms -> lowest to top. (we want large and old utxos to maximise staking rewards.)

    select the top txid/vout

    add this txid to txid_list

    get last segid stakes 1440 blocks (last24H)

    select all segids under average stakes per segid in 24H

    randomly choose one to get segid we will send to.        

if segid >= 0 :

fetch last transaction in block

check if this tx belongs to the node

if yes, use alrights code to combine this coinbase utxo with the utxo that staked it.

Withdraw script is for withdrawing funds from a staking node, without messing up utxo distribution. Works like this:

Asks for percentage you want locked (kept). 

It then counts how many utxo per segid. 

Locks the largest and oldest utxos in each segid up to the % you asked.

Gives balance of utxos remaning that are not locked.  These should be the smallest and newest utxo's in each segid. The least likely to stake.

Then lets you send some coins to an address. 

Unlocks utxos again.