With this add-on you can display your Brewing steps temperatures on a 20x4 i2c LCD Display. In the future: In addition you can display the target-temperature and current-temperature of each fermenter.
This addon only works with I2C connected LCD Displays.
Wiring:
Display | PI |
---|---|
SDA | Pin 3 GPIO02(SDA1) |
SCL | Pin 5 GPIO03(SDL1) |
VCC | Pin 2 Power 5V |
GND | Pin 6 GND |
I2C Configuration:
Ensure to activate the I2C connection in Raspi configuration.
Look at https://openbrewing.gitbook.io/craftbeerpi4_support/readme/plugin-installation. I can't explain that any better. The following description may still work for Raspi OS before Bookwom. For Bookworm goto Configuration after installing
This is the official installation via PyPI like Manuel83 (the developer) intended.
Navigate in the Linux console to the folder from which you start cbpi4.
Usually like: cd /home/pi/cbpi4........
Do not generate a folder for the plugin as it is generated by the code.
Type in
sudo pip3 install cbpi4-LCDisplay
sudo cbpi add cbpi4-LCDisplay
The plugin will be installed in:
/usr/local/lib/python3.7/dist-packages/cbpi4-LCDisplay/*
Navigate in the Linux console to the folder from which you start cbpi4.
Usually like: cd /home/pi/cbpi4........
Do not generate a folder for the plugin as it is generated by the code.
Then execute the commands in the raspi command box:
cd /home/pi/cbpi4 # subtitude /cbpi4 with your folder where you start cbpi. In this folder run the following commands
sudo cbpi create cbpi4-LCDisplay
sudo chown -R pi cbpi4-LCDisplay
sudo pip3 install -e ./cbpi4-LCDisplay
cbpi add cbpi4-LCDisplay
sudo rm -r cbpi4-LCDisplay/
sudo git clone https://github.com/JamFfm/cbpi4-LCDisplay
What does the Code? It installs a default plugin named cbpi4-LCDisplay. During installation several registrations are made. The folder cbpi4-LCDisplay is deleated and the new folder is generated by the clone process.
In the log when starting cbpi4 you hopefully will notice that LCDisplay started without errors. Your user has to have permissions to write in the filesystem. This is usually the case when you use user pi.
There is another way to install like:
sudo pip3 install https://github.com/JamFfm/cbpi4-LCDisplay/archive/main.zip
but this one installs in /usr/local/lib/python3.7/dist-packages/cbpi4-LCDisplay/* This is not handy if you need to assess the code. I do not recommend now. But this seems to be the desired folder to install via pip package. Please do not mix the possibilities to install.
Navigate in the Linux console to the folder from which you start cbpi4. Usually like: cd /home/pi/cbpi4........ Then execute the commands in the raspi command box:
sudo pip3 uninstall cbpi4-LCDisplay
sudo cbpi remove cbpi4-LCDisplay
At least configure your i2c address in the settings menu. Have a look at this documentation.
There are different modes:
If no brewing process is running the LCD will show
- CraftBeerPi-Version
- Brewery-name
- Current IP address
- Current date/time
- The script will loop through your kettles and display the target and current temperature.
- If heater is on, a beer-glass symbol will appear in the first row on the right side (not flashing).
- Use refresh parameter in settings to slow down or speed up the kettle changes.
- When target-temperature is reached it displays the remaining time of the step (rest) too.
- If the step name got the string "boil" in its name the remaining time to the next hop addition
will be displayed.
Otherwise the display of a boil type step looks the same as all the other steps.
- Only displays one kettle but reacts a little faster on temperature changes.
- It displays the remaining time of the step (rest) when target temperature is reached.
- A small beer-glass is flashing on/off in the first row on the right side to indicate that the heater is on.
- If the step name got the string "boil" in its name the remaining time to the next hop addition will be displayed. Otherwise the display of a boil type step looks the same as all the other steps.
-
Only displays the values and names of the sensortype.
-
E.g. a iSpindel sensor can display temperature, gravity, battery etc. These values with corresponding sensor name is shown.
-
The sensortype to be displayed is changed in settings section.
-
Only use this configuration when using avollkopfs fork of cbpi4: https://github.com/avollkopf/craftbeerpi4.
-
If you use original cbpi4 from Manuel you can have a look at the commands in the beginning of__init__ file.
-
If there is a missing sensor like from a future addon it can be added by typing in the code of function "set_sensortype_for_sensor_mode1" in the init.py file. there is only OneWire and CustomSensor functional (even some more are selectable).
- Pretty much the same as multidisplay for all fermenter.
- Starts automatically if there is no brewstep running and an active fermenterstep
- Displays the brew-name, fermenter-name, target-temperature, current-temperature of each fermenter.
- If the heater or cooler of the fermenter is on it will show a symbol. A beer-glass detects heater is on, * means cooler in on.
- The remaining time for each fermenter is shown like in weeks, days, hours.
- Fermenter mode starts when a fermenter-step of the fermenter is starting and no brewing step is running(most likely)
- if there is a iSpindel sensor the Gravity is displayed at the corresponding fermenter.
There are several parameter to change in the settings menu:
LCD_Address:
This is the address of the LCD module. You can detect it by
using the following command in the command box of the Raspi:
- sudo i2cdetect -y 1 or
- sudo i2cdetect -y 0.
Default is 0x27.
LCD_Charactermap:
Changes value between A00 and A02. This is a character map build in by factory into the LCD.
Most likely you get an LCD with A00 when you by it in China. A00 has got most of the European letters, and a lot
of Asia letters. For germans the ÄÖÜß is missing in A00. In A02 there are more European letters incl. ÄÖÜß.
Therefore, the addon distinguish between the charmaps.
In case A00 it substitutes ÄÜÖß with custom-made symbols which represent these letters.
In case A02 the addon skips substitution. If you notice strange letters try to change this parameter.
Default is "A00".
LCD_Display_Mode:
Changes between the 3 modes. Default is Multidisplay:
- Multidisplay
- Singledisplay
- Sensordisplay
LCD_Display_Sensortype:
Changes between sensortype (is like family of same sensors) which will be displayed in
the sensormode (sensordisplay). Default is OneWire sensors. If there is more than one sensor of same sensor
type the display toggles between the sensors
LCD_Refresh:
In Multidisplay and Sensor mode this is the time to wait until switching to next displayed kettle.
Default is 3 sec.
LCD_Singledisplay:
Here you can change the kettle to be displayed in single mode.
-
This is running in python3
-
Changing an LCD_xxxx parameter in the parameters menu or any file in LCDisplay folder usually requires a reboot.
-
Whenever you need a reboot, have a look in the comments of the parameters.
-
Future: A new fermenter should have a target temperature and at least one step defined.
-
Future: Maybe it is necessary to restart craftbeerpi after adding a new fermenter.
-
If the LCD address (e.g. 0x27) is right, but you still can not see letters displayed:
- try to adjust contrast by the screw on the back of the LCD Hardware (I2C Module)
- be sure to provide the LCD hardware with the right amount of voltage (mostly 5V or 3.3V)
- use a strong power-supply. If you notice LCD fading, there is a lack of current.
- the LCD needs same ground like Raspi. Otherwise i2c does not detect the i2c device (took me a day to find out).
- use proper connections. Soldering the wires is best for connection. Bad connection can also result in fading the LCD.
The LCD hardware does not like temperature below 0°C (32°F). It becomes slow and can be damaged like brightness is no more homogenous throughout the hole LCD area. Fermenters are not implemented as they are not implemented in CBPI4 until now (10-2021). If you need Fermenter in combination with fermenter have a look at https://github.com/PiBrewing/cbpi4-LCDisplay.
Questions can be posed in the Craftbeerpi user group in Facebook or in the repository.
- has to be done