Basically just X1Vita but with 8bitdo vid, pid, & mappings.
Compatible 8bitdo controllers: Arcade Stick, Lite, Pro, Pro+, Pro 2, & Zero 2.
Download: https://github.com/shadowknight1620/8BitVita/releases
Enable the plugin:
- Add 8BitVita.skprx to taiHEN's config (ux0:/tai/config.txt) or (ur0:/tai/config.txt):
*KERNEL ux0:tai/8BitVita.skprx
- You need to refresh the config.txt by rebooting or through VitaShell.
Using it for the first time (pairing the controller):
- Go to Settings -> Devices -> Bluetooth Devices
- Turn on the controller in x-input mode, typically
Start + X
on most 8bitdo models (Except the Arcade Stick, Lite, and Pro 2). - Put the controller into pairing mode by holding the
Select
button on most 8bitdo models (Unless it has a dedicated pairing button like the Arcade Stick, Lite, Pro, Pro+, and Pro 2), the led will blink rapidly or a pattern will begin flashing on the led's. - Select the controller name in the bluetooth devices list, the controller will then connect and be paired (You may get a message saying "Do you want to connect?" press ok).
Using it once paired (see above):
- Just turn on the controller in x-input mode and it will connect to the Vita.
Note: This plugin is compatible with minivitaTV ;) If you are using multiple controllers the controller ports will be set in the order you connect (if available), so first connection -> port 1 second connection -> port 2 (Maximum of two controllers can be used simultaneously).
Credit goes to M Ibrahim. Thanks to ShadowKnight1620 for testing.
Based on X1Vita & ds4vita