Merge pull request #2 from IQTLabs/dev

merging in Dev branch

.gitignore

@@ -1 +1,5 @@
 .DS_Store
+.env
+notes.md
+axis-ptz/*.jpg
+axis-ptz/capture/*

README.md

@@ -2,3 +2,84 @@
 Automatically photograph planes that fly by!
 -----
 Follow allowing as we build, [here](https://iqtlabs.github.io/SkyScan/)
+
+![Airbus A321](media/a321.jpg)
+*Airbus A321 at 32,000 feet*
+
+## Overview
+To enable better tracking, most planes broadcast a signal known as [Automatic Dependent Surveillance–Broadcast](https://en.wikipedia.org/wiki/Automatic_Dependent_Surveillance–Broadcast) or ADS-B. This signal is at 1090MHz and can be easily received using a low cost Software Defined Radio (SDR), like the [RTL-SDR](https://learn.adafruit.com/getting-started-with-rtl-sdr-and-sdr-sharp) which repurposes a digital TV chip.
+
+From the ADS-B transmissions, you can get a plane's location and altitude. If you know where a plane is and where you are, you can do some math and point a camera at the plane and take a picture. If you have a Pan/Tilt camera lying around, you can have it automatically track a plane as it flies by and snap photos.
+
+## Hardware
+The project works with the following hardware. It should be easy to extended to work with other SDRs or cameras... but that is on you.
+- Raspberry Pi 4
+- [Axis m5525](https://www.axis.com/en-us/products/axis-m5525-e) Axis has a great API for their network cameras, and it should work with any of there PTZ cameras. The m5525 is nice because it supports continuous 360 degree rotation. You can literally have it spin around in circles, giving you complete coverage. It also has 10x optical zoom.
+- [Pan Tilt Hat](https://shop.pimoroni.com/products/pan-tilt-hat?variant=22408353287) & Raspberry Pi Camera - This is the budget option. It is a small kit that uses servo motors to move the Raspberry Pi Cam around. It only has about 170 degrees of panning and the positioning is not that accurate. Since the Pi Cam is used, it is not zoomed in much. If you are in a spot where planes are flying low overhead, this could be a perfect solution. 
+- [RTL-SDR](https://www.nooelec.com/store/sdr/nesdr-smart-sdr.html) This is nice and stable RTL-SDR. It is compact and doesn't block all the other ports on a Pi. Since you are just trying to capture local planes, you can get away with using any antenna you have lying around.
+
+## Software Architecture
+
+The different components for this project have been made into Docker containers. This modularity makes it easier to add in new data sources or cameras down the road. We have found containers to work really well on the Pi and the help enforce that you have properly documented all of the software requirements.
+
+````
++-------------+      +-------------+           +---------------+            +--------------+
+|             |      |             |           |               |            |              |
+|             |      |             |           |               |            |  Axis+PTZ    |
+| Pi+Aware    +----->+  ADSB+MQTT  +---------->+ Tracker       +----------->+              |
+|             | TCP  |             |  MQTT     |               |  MQTT      |              |
+|             |      |             |  all      |               |  only      |              |
++-------------+      +-------------+  planes   +---------------+  tracking  +-------+------+
+                                                                  plane             |
+                                                                                    | HTTP API
+                                                                                    | Pan/Tilt
+                                                                                    v
+                                +--------------------+                     +--------+---------+
+                                |                    |                     |                  |
+                                |                    |                     |                  |
+                                |   MQTT Broker      |                     |    Axis m5525    |
+                                |                    |                     |    Camera        |
+                                |                    |                     |                  |
+                                |                    |                     |                  |
+                                +--------------------+                     +------------------+
+
+````
+
+Here is a brief overview of each component. There are additional details in the component's subdirectory
+
+- [mikenye/piaware](https://github.com/mikenye/docker-piaware) - This is a dockerized version of FlightAware's [PiAware](https://flightaware.com/adsb/piaware/) program. PiAware is actually just a wrapper around [dump1090](https://flightaware.com/adsb/piaware/). Dump1090 is a small program that can use an RTL-SDR to receive an ADS-B transmission. The program uses these transmission to track where nearby planes are and display then on a webpage. It also output all of the messages it receives on a TCP port, for other programs to use. We use this connection to get the plane information. PiAware adds the ability to send the information to FlightAware. You could probably just switch this to only use Dump1090.
+
+- [ADSB-MQTT](adsb-mqtt) Is a small python program that reads in information collected by Dump1090 over a TCP port and publishes all the messages it receives onto the MQTT bus. 
+
+- [tracker](tracker) Receives all of the plane's location, determines how far away from the camera each one is and then finds the closest plane. The location and relative position of the closest plane is periodically published as an MQTT messages. Tracker needs to know the location and altitude of the camera in order to determine the planes relative position.
+
+- [axis-ptz](axis-ptz) Receives updates on which plane to track over MQTT and then directs the PTZ camera towards the plane and takes a picture.
+
+
+
+### Configure
+In order to start PiAware, you need to register with Flight Aware and request a Feed ID. There are directions on how to do that [here](https://github.com/mikenye/docker-piaware#new-to-piaware).
+
+Copy the **env-example** file to **.env**. Edit the **.env** file to include the correct values.
+
+### Operations
+Launch the application using docker-compose: 
+```bash
+docker-compose up
+```
+
+A web interface will be available on **port 8080**. As pictures of planes are captured they will be saved in folders in the **./capture** directory.
+
+
+### Enable Raspi-camera
+
+If you are using the Pan Tilt hat, you will need to make sure the Pi Camera has been configured correctly:
+In the base OS on the Pi make sure the Camera is enabled:
+```bash
+sudo raspi-config
+```
+- Interfacing Options
+- Camera
+- Enable
+
+