ASR Microelectronics ASR605x (ASR6501, ASR6502): development platform for PlatformIO
Please use the heltec-cubecell development platform as the drop-in replacement:
[env:yourenv]
platform = heltec-cubecell
framework = arduino
board = your_board_id
ASR Microelectronics ASR605x series is highly integrated and ultra low power SoC based on the PSoC 4000 series MCU (ARM Cortex M0+ Core) and Semtech SX1262 transceiver.
- Home (home page in the PlatformIO Registry)
- Documentation (advanced usage, packages, boards, frameworks, etc.)
- Install PlatformIO
- Create PlatformIO project and configure a platform option in platformio.ini file:
[env:stable]
platform = asrmicro650x
board = ...
...
[env:development]
platform = https://github.com/HelTecAutomation/platform-asrmicro650x.git
board = ...
...
LoRaWAN protocol can be configured in https://docs.platformio.org/en/latest/projectconf/index.html using the following syntax
board_build.arduino.lorawan.*
where *
is an option from the following list:
Option | Description | Possible values | Default |
---|---|---|---|
region |
Region definition | AS923_AS1 , AS923_AS2 , AU915 , CN470 , CN779 , EU433 , EU868 , KR920 , IN865 , US915 , US915_HYBRID |
US915 |
class |
Device class | CLASS_A , CLASS_C |
CLASS_A |
netmode |
Activation method | OTAA , ABP |
OTAA |
adr |
Adaptive Data Rate | ON , OFF |
ON |
uplinkmode |
Uplink confirmed/unconfirmed messages | CONFIRMED , UNCONFIRMED |
CONFIRMED |
net_reserve |
Don't rejoin after reset | ON , OFF |
OFF |
at_support |
AT commands support | ON , OFF |
ON |
rgb |
RGB light for LoRaWAN status | ACTIVE , DEACTIVE |
ACTIVE |
preamble_length |
Preamble length | 8 , 16 (For M00 and M00L) |
8 |
debug_level |
Print LoRaWAN relevant messages print to serial port | NONE , FREQ (Sending/receiving frequency), FREQ_AND_DIO (Sending/receiving frequency and DIO pin interrupt information) |
NONE |
Example
[env:cubecell_board]
platform = asrmicro650x
framework = arduino
board = cubecell_board
board_build.arduino.lorawan.region = EU433
board_build.arduino.lorawan.adr = OFF
board_build.arduino.lorawan.debug_level = FREQ_AND_DIO
More information about LoRaWAN configuration can be found in the official CubeCell documentation.