Nethunter kex connection faild or error #168

me96 · 2020-08-02T13:34:48Z

When I am using nethunter kex gui after sometime it comes connection faild how can I solve this problem

mpotane · 2020-08-06T05:07:51Z

Try changing the port to 5902... also check if vncserver is started in termux .. then vnc start in nethunter

me96 · 2020-08-06T06:09:32Z

Its not working in the time of using nethunter kex for GUI then after sometime it comes an error or connection faild and termux also closed automatically and kills the session how can I slove these problems

Varun407 · 2020-08-20T04:59:53Z

First type these commands in termux:
'nethunter kex &'
That will show the port that you have to connect.
And open kex and set that port you have previously seen.
And then connect.

nadirchine · 2021-05-02T21:19:09Z

If you are rooted ( not using Termmux), just go to /data/local/Kalinh/root/ then delete the folder called "./vnc". After that you will be able to use nethunter KEX after setting password from terminal by typing: vncserver.

nadirchine · 2021-05-07T09:10:06Z

Finally I found the solution of this crazy problem... because I am rooted, I used root explorer App to navigate to this folder /data/local/kali/root/, then I removed the folder called “.vnc”, and here we go ... after all, we can create our vnc server only from kali terminal by typing vncserver 😍😍😍 enjoy!

me96 · 2021-05-10T02:12:59Z

But the device is not rooted is it possible to overcome with that problem

me96 · 2021-05-10T02:14:55Z

First type these commands in termux:
'nethunter kex &'
That will show the port that you have to connect.
And open kex and set that port you have previously seen.
And then connect.

But its not working

nadirchine · 2021-05-10T02:19:12Z

But the device is not rooted is it possible to overcome with that problem

If you are not rooted (work with Termux), just follow:

1- long press the termux app and go Press "Force stop"
2- open termux app
3- again make new password for nethunter kex just type "nethunter kex passwd"
4- after you set the password type "nethunter kex &"

it will reset and give you a new port for nethunter kex app
5- go to nethunter kex app and set the port and put the password
It works perfectly fine :)

me96 · 2021-05-10T03:24:12Z

But the device is not rooted is it possible to overcome with that problem

If you are not rooted (work with Termux), just follow:

1- long press the termux app and go Press "Force stop"
2- open termux app
3- again make new password for nethunter kex just type "nethunter kex passwd"
4- after you set the password type "nethunter kex &"

it will reset and give you a new port for nethunter kex app
5- go to nethunter kex app and set the port and put the password
It works perfectly fine :)

No bro its not working after some time its showing connection failed and there is acknowledged bottom then I am coming to nethuntetkex home screen
Then I am again tried to connect its shows some ECONNREFUSED (connection refused)
Try to solve this problem

AnnonymousTing · 2021-09-02T13:51:42Z

hey can you fix fail to download and need to download it manually

Danielxxxgek · 2021-11-03T12:16:30Z

Nothing is working 😔

aioont · 2022-02-04T12:37:12Z

Let me know these work ?

It's properly working on kali linux rootless on android.

https://github.com/aioont/kex

If your error still exist,then try these

cd ~/.vnc/
rm -rf *.log *.pid
cd /
rm -rf /tmp/.X* /tmp/.xfsm* /tmp/.l2s* /tmp/.ICE-unix
vncserver -kill :*
vncserver -depth 24 -geometry 1920x1080 :1

//Removing log pid files in ~/.vnc directory
//Removing some files and directories under /tmp

LORD-Zenix · 2022-06-25T02:20:12Z

Why do I always use the "nethunter" command but it doesn't work
nethunter: command not found

aioont · 2022-06-27T05:45:18Z

Why do I always use the "nethunter" command but it doesn't work

• To start Kali NetHunter command line interface
• The command nethunter can be abbreviated to nh.
• nethunter kex &
start Kali NetHunter Desktop Experience user sessions

nethunter: command not found

Check a file nethunter exist on folder /data/data/com.termux/files/usr/bin

If it is not there follow these step :
https://github.com/aioont/kex

1: Just download nethunter
wget https://raw.githubusercontent.com/aioont/kex/main/nethunter.sh

2: Setup permission
chmod +x nethunter.sh

3: Rename and move files to required location

mv nethunter.sh nethunter && mv nethunter /data/data/com.termux/files/usr/bin

Hope it helps...

lloydclyde · 2022-09-22T19:17:58Z

When I am using nethunter kex gui after sometime it comes connection faild how can I solve this problem

Even mine is also saying the same thing.after it works for about a minute.same errors repeats itself."error connection "

lloydclyde · 2022-09-22T19:25:21Z

What can I do to overcome this continously showing error.termux show me signal completed signal 9,from knowhere then awaits for me to press enter for it to close.the kex app will then show the error code no connection.tried all the tutorials online.but the error code keeps showing.in no root nethunter

aioont · 2022-09-22T19:40:49Z

I think this issue still exists and its not solved.Please provide screenshot may be anybody can help you ?
I don't know the solution but try this steps :
#168 (comment)

#168 (comment)

Turn off power saving option, optimization for termux and nethunter kex app ( vnc). Allow background activity (temporarily,switch back to normal if it doesn't work).

Please share Android version also.

I have also facing issue with connection automatically closed during minimize or switching between apps.

Check whether connection keep going ?

After running nethunter kex start connect to kex(vnc)
and do not minimize or switch apps.Stay inside the vnc apps.

Still the connection closed automatically ?

I don't know what next to do .

aioont · 2022-09-23T08:22:50Z

#168 (comment)

I think you followed this and error still exist.The reason is that Android OS kill termux because of PhantomProcessRecord.killLocked().

Please refer to this :
https://m.youtube.com/watch?v=jSHpmvfNUUA

termux/termux-app#2366

RandomCoderOrg/ubuntu-on-android#110

https://youtu.be/tB7b-YCSghQ

Android OS kills the process causing to termination.
I am not a expert at this but try the first YouTube video solution.
I think lower Android version can run termux without problem.

I'm using Android 11 , facing connection failed when I switch or minimize apps.

Ask questions in more active discussion page and someone can help you to fix this problem.

Update :

I checked kali nethunter rootless on Android Version 9 today and it works perfectly.Closed termux (without exiting) there is no problem with connection.

CitizenPrayer · 2022-10-30T22:07:19Z

Has anyone found a solution to this? I still can't get it to work on my rootless galaxy note 10+

SaheelKumarSingh · 2022-12-14T08:39:44Z

I faced the same problem of kex not working when i installed a vnc server and tried to reach linux through vnc.. I tried every possible way to run kex but it didn't work, so at the end I deleted termux, installed it again and did the entire installation process and now it is working.

I guess, kex not responding or error in kex depends upon the nature of mistake done by us, knowingly or unknowingly. The best option according to me is to just reinstall and run the entire installation process again but if it still doesn't work, then I guess, using termux, you will have to delete all the installations of 'wget' and all other softwares installed initially, from the core and again try to install it fresh.

Please do tell me if this works. Thanks.

aioont · 2023-01-20T15:23:44Z

I faced the same problem of kex not working when i installed a vnc server and tried to reach linux through vnc.. I tried every possible way to run kex but it didn't work, so at the end I deleted termux, installed it again and did the entire installation process and now it is working.

I guess, kex not responding or error in kex depends upon the nature of mistake done by us, knowingly or unknowingly. The best option according to me is to just reinstall and run the entire installation process again but if it still doesn't work, then I guess, using termux, you will have to delete all the installations of 'wget' and all other softwares installed initially, from the core and again try to install it fresh.

Please do tell me if this works. Thanks.

aioont/kex#3

https://github.com/aioont/kex

Hope it help someone :)

Arham2006 · 2023-02-03T18:11:19Z

They shows
Command not found

aioont · 2023-02-04T02:44:16Z

They shows
Command not found

Please provide more details

What error you are getting or screenshot will be more helpful

If you are getting nethunter command not found then refer to :
#168 (comment)

If you are facing error associated with kex and nethunter follow
https://github.com/aioont/kex

Adyextreme01 · 2023-02-18T21:42:47Z

the issue is simple to be resolve
1 type nh
2 type tigervncserver
3 check on wich port it is running
4 type exit
5 type nethunter kex &
hope that resoleves the issue

hackar109 · 2023-02-20T16:22:15Z

Can I use Android 12 in using nethunter

Kmcc0014 · 2023-02-24T21:48:00Z

the issue is simple to be resolve
1 type nh
2 type tigervncserver
3 check on wich port it is running
4 type exit
5 type nethunter kex &
hope that resoleves the issue

What was that supposed to do? Didn’t change anything

aioont · 2023-02-25T04:51:20Z

Please provide more details

What error you are getting or screenshot will be more helpful

If you are facing error associated with kex and nethunter follow
https://github.com/aioont/kex

aioont · 2023-02-25T04:53:05Z

Can I use Android 12 in using nethunter

Please read this :
#168 (comment)

Install and check it works properly
Give it a try :)

xdeadlyangelx · 2023-02-28T23:56:13Z

What can I do to overcome this continously showing error.termux show me signal completed signal 9,from knowhere then awaits for me to press enter for it to close.the kex app will then show the error code no connection.tried all the tutorials online.but the error code keeps showing.in no root nethunter

In termux, do you have the screen set to stay on? If not, you can set it by long pressing in termux, select "more", and check the "keep screen on" box. I think that's why I had a similar problem. Hope it helps.

aioont · 2023-06-01T03:26:55Z

please help 😭😞🙏 guys this is what am facing
┌──(kali㉿localhost)-[~] └─$ whoami
kali

┌──(kali㉿localhost)-[~]
└─$ ls

┌──(kali㉿localhost)-[~]
└─$ kex
/usr/bin/kex: line 19: vncserver: command not found
/usr/bin/kex: line 20: vncserver: command not found
/usr/bin/kex: line 25: vncpasswd: command not found /usr/bin/kex: line 30: vncserver: command not found

Error starting the KeX server.
Please try "nethunter kex kill" or restart your termux session and try again.

┌──(kali㉿localhost)-[~]
└─$

The error message suggests that the required commands, such as vncserver and vncpasswd, are not found on your system.

1.Ensure that you have installed the necessary packages: Make sure that you have installed the required VNC server packages on your Kali Linux system. You can do this by running the following command:

sudo apt-get install tightvncserver

2.Verify the VNC server installation: After installing the tightvncserver package, make sure that the vncserver command is available. You can check this by running the following command:

vncserver

3.If the command is recognized and a VNC server is started, proceed to the next step. Otherwise, please check your installation and ensure that the vncserver command is correctly installed.

4.Restart your Termux session: If you are running Kali Linux in Termux on an Android device, you can try restarting your Termux session and attempt running the kex command again.

5.Use the correct command: It seems that you are running the kex command, which is not recognized. To start the KeX server in Kali Linux, the correct command is nethunter kex. You can try running the following command

nethunter kex

If nothing works follows this repository and reinstall kex and nethunter

https://github.com/aioont/kex

logobg · 2023-07-12T23:04:40Z

youtu. be/vZBUI3wMU5Q

Sora-5653 · 2023-07-24T14:17:14Z

It is black out, how to fix it? I've done the install step perfectly ofc.

aioont · 2023-07-24T14:47:49Z

Try uninstall vncserver and reinstall.

…

On Mon, 24 Jul 2023, 7:47 pm Seiya5653, ***@***.***> wrote: It is black out, how to fix it? I've done the install step perfectly ofc. [image: Uploading Screenshot_2023-07-24-23-13-48-588_com.realvnc.viewer.android.jpg…] — Reply to this email directly, view it on GitHub <#168 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AXGTOLBCPGPGYTICMDKMZJDXRZ7XXANCNFSM4PSRTHTQ> . You are receiving this because you commented.Message ID: ***@***.***>

brcthdrgn · 2023-07-24T23:36:24Z

Thank you so much. 🐉☯️Sorry for delay--Sent from my Android phone with mail.com Mail. Please excuse my brevity.On 7/24/23, 9:48 AM aioont ***@***.***> wrote: Try uninstall vncserver and reinstall. On Mon, 24 Jul 2023, 7:47 pm Seiya5653, ***@***.***> wrote: It is black out, how to fix it? I've done the install step perfectly ofc. [image: Uploading Screenshot_2023-07-24-23-13-48-588_com.realvnc.viewer.android.jpg…] — Reply to this email directly, view it on GitHub <#168 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AXGTOLBCPGPGYTICMDKMZJDXRZ7XXANCNFSM4PSRTHTQ> . You are receiving this because you commented.Message ID: ***@***.***> —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

Tadvidharmesh · 2023-08-23T10:12:01Z

When I am using nethunter kex gui after sometime it comes connection faild how can I solve this problem

yutenli14 · 2023-09-27T07:34:11Z

please help me
my problem is kali can't apt update and nethunter kex long in is not working dbus-launch

Adyextreme01 · 2023-10-21T19:02:19Z

your issue is related to dns errors try to set your dns server s 8.8.8.8 8.8.4.4

sumitmusale07 · 2023-11-07T21:20:35Z

Can't update but i can ping to Google , what's problem here ..?
I also tried setting dns to 8.8.8.8 etc but it doesn't fix this issue, I'm on Android 10

Hooleymass · 2023-12-04T08:30:54Z

Can't update but i can ping to Google , what's problem here ..? I also tried setting dns to 8.8.8.8 etc but it doesn't fix this issue, I'm on Android 10

I HAD SAME ISSUE and I added the dns to the resolv.conf file
┌──(kali㉿localhost)-[~]
└─$ sudo nano /etc/resolv.conf

nameserver 8.8.8.8
nameserver 8.8.4.4

Lokiamv · 2023-12-21T19:59:44Z

If you are rooted ( not using Termmux), just go to /data/local/Kalinh/root/ then delete the folder called "./vnc". After that you will be able to use nethunter KEX after setting password from terminal by typing: vncserver.

It's no working I think I need password but where can I get?

githubUSER5kr · 2023-12-29T01:54:17Z

What can I do to overcome this continously showing error.termux show me signal completed signal 9,from knowhere then awaits for me to press enter for it to close.the kex app will then show the error code no connection.tried all the tutorials online.but the error code keeps showing.in no root nethunter我該怎麼做才能克服這個持續顯示錯誤的問題。termux向我顯示信號已完成信號9，來自knowhere然後等待我按回車鍵將其關閉。然後kex應用程式將顯示錯誤代碼沒有連接。嘗試了所有線上教學.但是錯誤代碼一直顯示.在沒有 root nethunter 的情況下

Check this video: https://www.youtube.com/watch?v=mjXSh3yq-I0

NENOcracker · 2024-01-02T20:49:51Z

i followed all steps but still got this error
can any one help ?

mjcbjee · 2024-01-19T12:03:56Z

in termux when I type nethunter kex passwd it say command not found. what can I do to solve this problem.

Rick1330 · 2024-02-08T21:29:04Z

This is how it looks like help me

sumon-duwarah · 2024-02-14T13:15:22Z

Can't update but i can ping to Google , what's problem here ..? I also tried setting dns to 8.8.8.8 etc but it doesn't fix this issue, I'm on Android 10

I HAD SAME ISSUE and I added the dns to the resolv.conf file ┌──(kali㉿localhost)-[~] └─$ sudo nano /etc/resolv.conf
nameserver 8.8.8.8
nameserver 8.8.4.4

No only 3 minute working 🥲🥲

sumon-duwarah · 2024-02-14T13:15:32Z

Wow 😍😍😍

003ry · 2024-02-22T02:07:24Z

Termux will be killed . This is due to a newly introduced system mechanism called "Phantom Process Killing", which limits daemon usage.The recommendation is to permanently disable "Phantom Process Killing" with the ADB command.The best way is use Windows to download ADB tool from official .
https://developer.android.com/studio/releases/platform-tools
Or use Termux remote debugging ADB.
https://ivonblog.com/posts/termux-wireless-adb/

Allankioni · 2024-02-22T04:46:06Z

I just did that and it seems to work but now it just disconnects then I have to click the connect tab, in termux it seems to work well. Thanks very much

…

On Thu, Feb 22, 2024, 5:07 AM 003ry ***@***.***> wrote: Termux will be killed . This is due to a newly introduced system mechanism called "Phantom Process Killing", which limits daemon usage.The recommendation is to permanently disable "Phantom Process Killing" with the ADB command.The best way is use Windows to download ADB tool from official . https://developer.android.com/studio/releases/platform-tools Or use Termux remote debugging ADB. https://ivonblog.com/posts/termux-wireless-adb/ — Reply to this email directly, view it on GitHub <#168 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BDIILNNWDPYP26BUQBUYWFLYU2R65AVCNFSM4PSRTHT2U5DIOJSWCZC7NNSXTN2JONZXKZKDN5WW2ZLOOQ5TCOJVHA2TGMBQGQ3Q> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

sheheed777 · 2024-02-29T21:07:38Z

لماذا تظهر لي هذه الرسالة كيف احلها
bash: nethunter: command not found

لقد حملت النسخة الحد الادنى من كالي نيت هنتر

sheheed777 · 2024-02-29T21:08:22Z

عند كتابة الامر nethunter kex passwd

jayeshbarman · 2024-03-19T00:37:59Z

showing process completed after connecting nethunter kex and it exits

carlosdarkoficial · 2024-03-28T08:14:19Z

nh
$ vncserver -localhost no
nh -r

vncserver -localhost no

https://play.google.com/store/apps/details?id=com.realvnc.viewer.android

Aylin070 · 2024-04-23T10:06:18Z

I'm not even getting the "connect" option in Net hunter kex in my Android phone

Allankioni · 2024-04-23T10:35:53Z

You try to uninstall the net hunter kex app then reinstall it

…

On Tue, Apr 23, 2024, 1:06 PM Aylin070 ***@***.***> wrote: I'm not even getting the "connect" option in Net hunter kex in my Android phone — Reply to this email directly, view it on GitHub <#168 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BDIILNJLFRKVAJQ65534LXDY6YXDLAVCNFSM4PSRTHT2U5DIOJSWCZC7NNSXTN2JONZXKZKDN5WW2ZLOOQ5TEMBXGE4TCNZRHEYQ> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

VitoGk · 2024-05-19T17:51:35Z

Every time i try to run kex it doesn't run i get a error.

Can somebody help me with it?

I have search the internet but find nothing.

Vxlmane · 2024-06-03T13:44:50Z

Nothing is working 😔

Me too ┌──(kali㉿localhost)-[~] └─$ whoami
kali

┌──(kali㉿localhost)-[~]
└─$ ls

┌──(kali㉿localhost)-[~]
└─$ kex
/usr/bin/kex: line 19: vncserver: command not found
/usr/bin/kex: line 20: vncserver: command not found
/usr/bin/kex: line 25: vncpasswd: command not found /usr/bin/kex: line 30: vncserver: command not found

Error starting the KeX server.
Please try "nethunter kex kill" or restart your termux session and try again.

┌──(kali㉿localhost)-[~]
└─$

ME TOO OMG 😭😭😭

aioont · 2024-06-03T13:51:53Z

Nothing is working 😔

Me too ┌──(kali㉿localhost)-[~] └─$ whoami
kali

┌──(kali㉿localhost)-[~]
└─$ ls

┌──(kali㉿localhost)-[~]
└─$ kex
/usr/bin/kex: line 19: vncserver: command not found
/usr/bin/kex: line 20: vncserver: command not found
/usr/bin/kex: line 25: vncpasswd: command not found /usr/bin/kex: line 30: vncserver: command not found

Error starting the KeX server.
Please try "nethunter kex kill" or restart your termux session and try again.

┌──(kali㉿localhost)-[~]
└─$

ME TOO OMG 😭😭😭

Follow this

#168 (comment)

And checkout repository

https://github.com/aioont/kex

carlosdarkoficial · 2024-06-14T06:05:12Z

Instala e usa o vnc

aioont mentioned this issue Sep 23, 2022

H aioont/kex#2

Closed

aceng12345 mentioned this issue Nov 15, 2023

First type these commands in termux: #369

Open

Nethunter kex connection faild or error #168

Nethunter kex connection faild or error #168

Comments

me96 commented Aug 2, 2020

mpotane commented Aug 6, 2020

me96 commented Aug 6, 2020

Varun407 commented Aug 20, 2020

nadirchine commented May 2, 2021

nadirchine commented May 7, 2021

me96 commented May 10, 2021

me96 commented May 10, 2021

nadirchine commented May 10, 2021

me96 commented May 10, 2021

AnnonymousTing commented Sep 2, 2021

Danielxxxgek commented Nov 3, 2021

aioont commented Feb 4, 2022 • edited Loading

LORD-Zenix commented Jun 25, 2022

aioont commented Jun 27, 2022

lloydclyde commented Sep 22, 2022

lloydclyde commented Sep 22, 2022

aioont commented Sep 22, 2022 • edited Loading

aioont commented Sep 23, 2022 • edited Loading

CitizenPrayer commented Oct 30, 2022

SaheelKumarSingh commented Dec 14, 2022

aioont commented Jan 20, 2023 • edited Loading

Arham2006 commented Feb 3, 2023

aioont commented Feb 4, 2023 • edited Loading

Adyextreme01 commented Feb 18, 2023

hackar109 commented Feb 20, 2023

Kmcc0014 commented Feb 24, 2023

aioont commented Feb 25, 2023

aioont commented Feb 25, 2023

xdeadlyangelx commented Feb 28, 2023

aioont commented Jun 1, 2023

logobg commented Jul 12, 2023

Sora-5653 commented Jul 24, 2023

aioont commented Jul 24, 2023 via email

brcthdrgn commented Jul 24, 2023 via email

Tadvidharmesh commented Aug 23, 2023

yutenli14 commented Sep 27, 2023 • edited Loading

Adyextreme01 commented Oct 21, 2023

sumitmusale07 commented Nov 7, 2023

Hooleymass commented Dec 4, 2023 • edited Loading

Lokiamv commented Dec 21, 2023

githubUSER5kr commented Dec 29, 2023

NENOcracker commented Jan 2, 2024

mjcbjee commented Jan 19, 2024

Rick1330 commented Feb 8, 2024

sumon-duwarah commented Feb 14, 2024 • edited Loading

sumon-duwarah commented Feb 14, 2024

003ry commented Feb 22, 2024

Allankioni commented Feb 22, 2024 via email

sheheed777 commented Feb 29, 2024 • edited Loading

sheheed777 commented Feb 29, 2024

jayeshbarman commented Mar 19, 2024 • edited Loading

carlosdarkoficial commented Mar 28, 2024

vncserver -localhost no

Aylin070 commented Apr 23, 2024

Allankioni commented Apr 23, 2024 via email

VitoGk commented May 19, 2024

Vxlmane commented Jun 3, 2024

aioont commented Jun 3, 2024 • edited Loading

carlosdarkoficial commented Jun 14, 2024

aioont commented Feb 4, 2022 •

edited

Loading

aioont commented Sep 22, 2022 •

edited

Loading

aioont commented Sep 23, 2022 •

edited

Loading

aioont commented Jan 20, 2023 •

edited

Loading

aioont commented Feb 4, 2023 •

edited

Loading

yutenli14 commented Sep 27, 2023 •

edited

Loading

Hooleymass commented Dec 4, 2023 •

edited

Loading

sumon-duwarah commented Feb 14, 2024 •

edited

Loading

sheheed777 commented Feb 29, 2024 •

edited

Loading

jayeshbarman commented Mar 19, 2024 •

edited

Loading

aioont commented Jun 3, 2024 •

edited

Loading