STM32F401CCU6 / STM32F411CEU6 Core Board

You can search for "STM32F411CEU6"，"STM32F401CCU6","STM32F411","STM32F401" on AliExpress

1. WeAct Studio官方店
2. 育松电子（代售商家）
3. 淘宝其他电子商家未做确认

1. eixpsy旗舰店
2. 深圳市海瑟威电子商行
3. 佳仕通数码专营店
4. 待更新

If it doesn't have a logo and version number it isn't made by WeAct, probably Pirated&Fake.

The two boards are identical, other than the colour of the contacts. F401 has silver contacts, while F411 has gold contacts.

收到的板子没有Logo WeAct && 版本号 的均不是我们生产，如有质量问题和技术问题请自行寻找卖家解决

STM32F401 V1.2 End Of Life , STM32F411 V1.3 End Of Life Since 2019.11

STM32F401 V1.2,STM32F411 V1.3 已于2019.11停产

Thanks Richard·Balint !!

Using Pinout Diagram, Write MicroPython and Arduino code will be easier

• Version: V1.12-35

STM32F401CCU6 Supported, STM32F411CEU6 Supported.

STM32F411CE: https://github.com/WeActTC/WeAct_F411CE-MicroPython.git

STM32F401CC: /STM32F401CCU6-Black-Board/SDK/micropython/WeAct_F401CC

中文使用部分教程：点击

中文使用部分教程.pdf文件：/General document/MicroPython部分使用教程 _WeAct工作室.pdf

中文STM32下载烧录部分教程：点击

中文STM32下载烧录部分教程.pdf文件：/General document/STM32部分下载烧录问题汇总 _WeAct工作室.pdf

supported in English and Chinese

1. Hold down the , power on or reset again, and the C13 LED will blink to release
2. APP enters the bootloader reference stm32f401_test_APP 0x8004000.zip project
3. More instructions

1. 按住<KEY>键，重新上电或复位，C13 LED 闪烁即可松开
2. APP进入Bootloader 参考stm32f401_test_APP 0x8004000.zip 工程
3. 更多使用说明

• 方法1：上电状态下，按住BOOT0键和复位键，然后松开复位键，0.5秒后松开BOOT0键
• 方法2：掉电状态下，按住BOOT0键，上电后0.5S松开BOOT0
• DFU模式：使用数据线连接电脑即可，如出现无法识别问题，可以适当加热芯片(25°C)，再重新进入ISP模式
• 串口模式：使用USB转串口连接核心板的PA9,PA10即可
• 软件： STM32CubeProg。

• Method 1: When the power is on, press the BOOT0 key and the reset key, then release the reset key, and release the BOOT0 key after 0.5 seconds
• Method 2: When the power is off, hold down the BOOT0 key, and release the BOOT0 at 0.5s after the power is on
• DFU Mode: Use the data line to connect to the computer. If there is an unrecognized problem, you can heat the chip appropriately (25°C) and then re-enter the ISP mode
• Serial Port Mode: Connect PA9 and PA10 of core board with USB serial port
• Soft: STM32CubeProg。

STM32F411	STM32F401
Date Code	Date Code
947&002 (2020.03)	609&608
946&947 (2020.01)	723 (2020.01)
19+ (2019)	16+ (2019)