/pɪŋ ɡəˈnuː/
Pingnoo is an open-source combined traceroute and ping application for analysing network connections. It runs under Windows, macOS and Linux.
The binaries are available under the releases page.
Download the installer executable and run it to install the application. The installer will (optionally) create a desktop and a start menu shortcut for launching the software.
You can extract the portable edition zip file onto a memory stick. The application can then be launched directly from the memory stick without the need to install the software.
The application is a dmg disk image.
Download and open the disk image and drag the Pingnoo icon into the Applications folder. You can then launch the application by double-clicking on the Pingnoo icon in Applications.
From version 2021.04.30 pingnoo is built as a universal binary that will run natively on both Intel and Apple Silicon devices.
Native packages for popular Linux distributions are available, and these install with the correct permissions, which allow the application to run without root permissions.
Pingnoo is available pre-built for the following distributions.
- Arch Linux (64 bit binaries only)
- Debian 9, 10 (64 bit binaries only)
- Ubuntu 18.04, 20.04, 20.10 (64 bit binaries only)
- Raspbian 9, 10 (32 bit binaries only)
pingnoo is available for installation using apt. To do this, you will need to add our apt repository and gpg key, and You can use the following command to add the pingnoo repository to your operating system.
curl -s https://packagecloud.io/install/repositories/nedrysoft/pingnoo/script.deb.sh | sudo bash
You can then install pingnoo using the apt command.
sudo apt install pingnoo
By using the apt repository, you will be able to update pingnoo easily.
sudo apt update
Alternatively, you can download the appropriate deb file and install it manually.
dpkg -i <downloaded file>.deb
apt -f install
Pingnoo is available pre-built for the following versions.
- Fedora r32
- Fedora r33
The yum command can install pingnoo on a supported operating system. To do this, you will need to add the rpm repository and gpg key to your operating system installation.
curl -s https://packagecloud.io/install/repositories/nedrysoft/pingnoo/script.rpm.sh | sudo bash
After adding the repository, yum is used to install pingnoo.
sudo yum install pingnoo
Using the yum repository will allow you to update pingnoo easily when a new version is released.
sudo yum update
Alternatively, you can download the appropriate rpm file and install it manually.
yum localinstall <downloaded file>.rpm
Pingnoo is available in the AUR.
You can also clone the project from the AUR and build and install it using pacman.
git clone https://aur.archlinux.org/pingnoo.git
cd pingnoo
makepkg
sudo pacman -U <filename>.zst
Alternatively, You can also use a tool such as yay to install the pingnoo binary along with any required dependencies.
yay -S pingnoo
The AppImage file contains all dependencies and will run on any modern Linux distribution without installing additional packages.
After downloading the AppImage, you will need to set the execute attribute on the file.
chmod +x <downloaded filename>
The application requires RAW socket access, which means some limitations created by the AppImage process affect the operation of the application. You will need to follow the instructions outlined in the Linux Notes section regarding setuid, allowing you to run the application directly. Alternatively, you can launch from the terminal.
sudo ./<downloaded filename>`
The documentation for pingnoo is available on readthedocs.
https://pingnoo.readthedocs.io/en/latest/
You also have the option of building pingnoo from the source code. In addition to a compiler that supports the C++17 standard, you will also require the Qt 5 or 6 development libraries and CMake.
Pingnoo uses a modular design architecture based on components (aka plugins); the software can be extended easily by third parties by creating new components or modifying existing ones.
The following compiler configurations are known to work for development. (We do not supply binaries for 32-bit systems)
- Linux - 32 & 64-bit using GNU g++
- Windows - 32 & 64-bit using MSVC 2019 Community Edition
- Windows - 32 & 64-bit using mingw-g++
- macOS - 64-bit using clang from the xcode command line tools
Building the project will require specific libraries and toolchains to be installed.
You should use git to obtain the source code, pingnoo uses submodules, and GitHub does not bundle these in the source code tarball. If you use a tarball, you will have to download and place the other modules into the source tree.
git clone https://github.com/nedrysoft/pingnoo.git
cd pingnoo
git submodule update --init --recursive
The build documentation contains information about packages required to build the software from the source.
Change to the folder that contains the source code, and then execute the following commands.
mkdir build
cd build
cmake ..
make
CMake will configure the build ready for building using make. The resulting binaries are located in ../bin//
For example, the folder ../bin/x86_64/Release would contain the compiled binaries for an x86_64 release build.
Change to that folder and execute ./Pingnoo to run the application.
We use Docker containers to build pingnoo with our CI/CD system (TeamCity). These images contain all the required dependencies and build tools pre-installed for a specific operating system version.
The docker folder in the repository contains python scripts that produce repeatable images for all Linux distribution targets.
The deploy.py python script creates runnable/installable binaries for the given operating system.
- Linux - Generates a stand-alone AppImage and distribution specific packages.
- Windows - Generates an installer and a portable zip file that can run from a USB stick.
- macOS - Generates a DMG file.
The script requires Python 3.6 or later, curl and the colorama python module to enhance the console output. You can install the Colorama module with the following command.
(The CMake script provides an install target that uses the deploy.py script to generate a deployable image)
pip3 install colorama
The script provides the following parameters:
--qtdir="<path to qt>"
- the path to the version of qt used.--curlbin="<path to curl binary>"
- the path to the curl binary, i.e"/usr/bin/curl"
.--arch="<x64|x86|armv7l|universal>"
- the architecture to deploy. (universal is available on macOS and Windows)--type=<release|debug>
- the build type to deploy.--cert="<cert>"
- the value of this is dependent on the platform, for Windows and macOS OS it is the name of the certificate to be used, for Linux it is the gpg2 key identifier.--timeserver="<name>"
- windows only, the name of the time-server to be used during signing--appleid="<email>"
- macOS only, the Apple ID of the developer account used to sign the binary--password="<password>"
- macOS only, the password of the Apple ID. The password can be stored in the keychain and accessed using"@keychain:<identifier>"
instead of passing the actual password to the script.--appimage
- Linux only, will generate an AppImage.--rpm
- Linux only, will generate an rpm package.--deb
- Linux only, will generate a deb package.--pkg
- Linux only, will generate an arch package.--appiamagetool="<path to appimage tool"
- Linux only, the path to the appimagetool binary.--linuxdeployqy="<path to linuxdeployqt tool"
- Linux only, the path to the linuxdeployqt binary.--signtool="<path to sign tool>"
- Windows only, the path to the signing tool.--pin=<pin>
- Windows only, if using scsigntool, the pin to use.--portable
- Windows only, will generate a portable zip file for windows.--version
- the version of the deployment tool.--debugoutput
- produce debug output.
The script will use the curl binary to obtain any tools required for the deployment process.
The script stores the deployable asset in the deployment folder.
The PingCommandPingEngine ping engine is an experimental ping engine that uses the Linux system ping command, and this allows the software to run without any special privileges. Please note that the Linux ping executable does not provide timing information for TTL expired replies.
Pingnoo instead uses a precision timer to measure the time taken from invoking the ping executable to receiving the TTL expired reply. Please note that this is not as accurate as the ICMP socket engine.
If the ICMPPingEngine is selected, then the application will require RAW socket privileges and must be run as root or given raw socket access using the setcap* command.
The setcap command will not work on the AppImage Linux release due to limitations with the AppImage architecture.
The CMake configuration for Linux has the following post link command, this command is optional, and you can control this with the option Pingnoo_SetRawCapabilities
.
sudo -n /usr/sbin/setcap cap_net_raw,cap_net_admin=eip $${APPLICATION_BINARY_FOLDER}/$${TARGET}
This command will automatically apply the required privileges to the executable after linking. By running setcap via sudo, the flag -n
is needed to stop sudo prompting for a password. If a password is required, then sudo will fail.
To stop sudo from requesting a password for the /usr/sbin/setcap
executable, create the following entry in /etc/sudoers
(replacing with the name of your user account).
<username> ALL = (root) NOPASSWD: /usr/sbin/setcap
In some Linux distributions, the setcap
executable may reside in a different folder such as /sbin
.
(Please be aware of any security issues by doing this.)
Also, it's not possible to debug the application due to the requirement of RAW sockets. One way of solving this is to create a script in /usr/bin/gdb-sudo
with the following content.
#!/bin/sh
sudo -n /usr/bin/gdb $@
Create an entry in /etc/sudoers
to allow gdb to run as root without a password.
<username> ALL = (root) NOPASSWD: /usr/bin/gdb
The final step is to configure Qt Creator to use this proxy script. Create a new debugger configuration in Qt Creator, selecting /usr/bin/gdb-sudo
as the gdb binary, repeating this for each kit you intend to use for debugging.
(Please be aware of any security issues by doing this.)
Debugging memory leaks can be done with Valgrind, but as above, the application requires raw socket privileges, and Valgrind cannot run the executable without being run as root. The following command can be executed from the application binary folder to run Valgrind and produce an XML debug log.
sudo /usr/bin/valgrind --child-silent-after-fork=yes --xml=yes --smc-check=all-non-file --tool=memcheck --gen-suppressions=all --track-origins=yes --leak-check=summary --num-callers=25 --xml-file=./debug.xml ./Pingnoo_debug
The Deleaker tool is used under Windows to locate memory leaks. It is currently Windows-only but works incredibly well for finding leaks.
The user interface is simple and allows viewing the leak trace of the leak, which is invaluable when figuring out which code level is responsible for the leak.
Set the Pingnoo_Build_Tests
option to ON
to generate a binary that performs unit tests.
The user interface uses a Ribbon style toolbar (as seen in applications such as Microsoft Office). To build the designer plugin, set the CMake option Pingnoo_Build_RibbonDesignerPlugin
to ON
. Copy the generated plugin to the Qt plugins folder to make it available in designer.
The gatekeeper requirements in macOS mean that the application needs to be signed and notarised to run without user interaction for allowing the application to run. You will require a paid developer account to obtain a code signing certificate that is valid for gatekeeper authentication.
This project was created and maintained by Adrian Carpenter.
I thank the following people for contributing to the project:
Pingnoo uses the following third-party libraries/assets/tools/services in the development of Pingnoo.
- Qt - cross-platform framework, licensed under the GPLv3 licence.
- cmake - cross-platform project build system, licensed under BSD licence.
- Catch2 - unit testing framework, licensed under the BSL-1.0 licence.
- GSL - guidelines support library for C++, licensed under the MIT licence.
- Font Awesome - glyph based icon font, licensed under the SIL OFL 1.1 licence.
- QCustomPlot - charting library for Qt, licensed under the GPLv3 licence.
- macdeployqtfix - finishes the job that macdeployqt starts, licensed under the MIT licence.
- linuxdeployqt - creates deployable linux binaries, licensed under the GPLv3 licence.
- dmgbuild - automates the creation of macOS DMG files, licensed under the MIT licence.
- colorama - python module for terminal colour, licensed under the BSD licence.
- rapidfuzz-cpp - an implementation for fuzzy string matching, licensed under the MIT licence.
- gren - a tool for automating release notes, licensed under the GPLv3 licence.
Also, the development of pingnoo is made possible with the following commercially licensed tools/services.
- SmartCard Tools - code-signing tool, allows automation of signing using a smartcard token.
- Certum Code Signing Certificate - open-source code signing certificate for signing Windows binaries.
- AdvancedInstaller - Installer creator for windows, License kindly provided by them for free.
- Affinity Designer - Vector artwork design application.
- Affinity Photo - Bitmap artwork design application.
- CLion - The preferred C++ IDE for development, Jetbrains kindly provided the license for free for the project.
- Deleaker - A memory leak detector for Windows, Softanics kindly provided the license for free for the project.
- Icofx - A tool for producing icon & icns files from source images.
- packagecloud - packagecloud kindly host the package repositories for Debian, Ubuntu and Fedora that make installing on those operating systems very easy.
- Araxis Merge - Araxis kindly provided the license for free for the project.
- Outline - A note-taking app that supports rich content and based on Markdown, the application is open-source but hosted accounts are available.
##Buy me a coffee
If you'd like to buy me a coffee, you can do this over at Ko-Fi by following this link.
Thanks :)
Pingnoo is open source and released under the GPLv3 license.
Distributed as-is; no warranty is given or implied.