- Install godot (Caution: The flatpak version does not work)
sudo apt install godot3 - Install the required dependencies:
sudo apt install libhidapi-hidraw0 - Clone this repository:
git clone https://github.com/GameDrivenDesign/motion-controls.git cdinto the repository:cd motion-controls- Grant user access to the bluetooth devices using
sudo chmod 0666 /dev/hidraw*. You need to rerun whenever you connect new devices or reboot your machine. - Run godot like so:
LD_LIBRARY_PATH=$(pwd)/JoyCons godot3 -e(If you are using a standalone installation, replace the godot3 with that binary)
- add joycon.tscn as a child of your player.tscn (or where you want to receive and react to events)
- now you can connect to the pressed/released events
button_pressed(button: string)
button_released(button: string)
# where button is one of
['top', 'right', 'left', 'down', 'math', 'joystick', 'shoulder', 'special', 'sl', 'sr', 'z']
# directional buttons are named after their orientation when holding the JoyCons sideways.- additionally, you can read a number of values from the accelerometer, gyroscope and device properties:
# READ/WRITE
$joycon.set_controller(index: int, manager: JoyConManager)
# index from 0 which controller this joycon.tscn instance represents
# and an instance of the joyconmanager that you used for init_devices (see below)
$joycon.bias: float # value you can try tweaking if the orientation values (see below) are
# too noisy. Lower values mean slower but more stable response to rotation
# READ ONLY
$joycon.raw_accel: Vector3 # raw acceleration in m/s², NOTE: this includes gravity!
$joycon.linear_accel: Vector3 # estimation of acceleration without gravity in m/s²
$joycon.raw_rotation: Vector3 # raw rotation in radians/s
$joycon.orientation: Quat # estimation of the current absolute orientation of the joycon
$joycon.color: Color # color of the controller
$joycon.is_left: bool # whether this controller is left or right
$joycon.joystick: Vector2 # current position of the joystick in [(-1;-1);(1;1)]
$joycon.buttons_pressed: Dict[string,bool]
# whether a button is held, use the button names from (2.) above
# FUNCTIONS
$joycon.rumble(frequency, intensity)
# Future Work
$joycon.dead_zone: number # dead zone for the joystick in distancen from 0,0
$joycon.leds: Array[bool] # an array of exactly four bools, indicating which LEDs are turned on- to control joining, use
var manager = preload("res:https://JoyCons/JoyConManager.gd").new()
func spawn_player(controller_number: number):
var player = preload("res:https://MyPlayer.tscn").instance()
# should set the nested joycon.tscn's controller_number
player.get_node("JoyCon").set_controller(controller_number, manager)
func _ready():
#all devices must be connected as this point, we do not support late joining
for index in manager.init_devices():
spawn_player(index)