Release of Remote-SDR v4.3 to remotely control an SDR receiver and an SDR transmitter from a web browser. It is the complete source code. Pre-configured for HAM Radio HF/VHF/UHF bands and QO-100 Es'Hail 2 satellite transponder. Can be used for any NBFM, SSB or CW Radio transmitter from 1MHz up to 6 GHz. The receiver modes are NBFM, WBFM, SSB, CW, AM. It works in Full-Duplex with Adalm-Pluto SDR, RTL-SDR , Hack RF One SDR or SA818.

This version 4.3 runs on :

Raspberry Pi 4B with 2GB or more memory
Orange Pi Zero 2
Orange Pi One Plus
This new version 4.3 introduces:

• additional audio imput/output to connect to external software (SSTV, FT8, Digi Modes..)
• Omnirig interface
  ...
  If you have already installed Remote SDR and you have customized the configurationRX.js or configurationTX.js files, copy them somewhere to be able to customize the new version.

If you have already installed the version 4.0, you can just replace the /var/www/html directory and reboot the processor.

Don't forget to set the flag on Chrome or Edge as explained here:
https://f1atb.fr/index.php/2022/01/06/microphone-and-signal-processing-authorization/
Since version 4.2 it is also necessary for the receiver audio channel.

In case of any blocking situation, go on the Tools page and select the "Reset Local Storage in browser". It will clean the history and restart on a clean configuration.

Details on https://f1atb.fr