Should probably try the original https://github.com/Sperryfreak01/RadarrSync

Thanks to https://github.com/Sperryfreak01/RadarrSync for the initial inspiration that lead to https://github.com/hjone72/RadarrSync MultiServer branch.

Syncs two Radarr servers through web API.

Many Plex servers choke if you try to transcode 4K files. To address this a common approach is to keep a 4k and a 1080/720 version in separate libraries.

Radarr does not support saving files to different folder roots for different quality profiles. To save 4K files to a separate library in plex you must run two Radarr servers. This script looks for movies with a specific quality setting on one server and creates the movies on a second server.

1. Edit the Config.txt file and enter your servers URLs and API keys for each server.

   Example Config.txt:

   [General]
   # Time to wait between adding new movies to a server. This will help reduce the load of the Sync server. 0 to disable. (seconds)
   wait_between_add = 5
   
   # Full path to log file
   log_path = ./Output.txt
   
   # DEBUG, INFO, VERBOSE | Logging level.
   log_level = DEBUG
   
   [RadarrMaster]
   url = https://127.0.0.1:7878
   key = XXXX-XXXX-XXXX-XXXX-XXXX
   
   [SyncServers]
   # Ensure the servers start with 'Radarr_'
   [Radarr_4k]
   url = https://127.0.0.1:7879
   key = XXXX-XXXX-XXXX-XXXX-XXXX
   
   # Only sync movies that are in these root folders. ';' (semicolon) separated list. Remove line to disable.
   rootFolders = /Movies
   
   # If this path exists
   current_path = /Movies/
   # Replace with this path
   new_path = /Movies4k/
   
   # This is the profile ID the movie will be added to.
   profileId = 5
   
   # This is the profile ID the movie must have on the Master server.
   profileIdMatch = 4

2. Find the profileIdMatch on the Master server. Usually just count starting from Any: #1 SD: #2 etc.... IE: if you use the default HD-1080p proflie that would be #4.

3. Change profileId configuration to what you want the profile to be on the SyncServer. In most cases you will want to use #5.

Recomended to run using cron every 15 minutes or an interval of your preference.

python3 RadarrSync.py

To test without running use:

python3 RadarrSync.py --debug --whatif

-- Python 3.4 or greater -- 2 or more Radarr servers