Payload launcher written in Kotlin for Nintendo Switch.

Application doesn't require Root on your device.

Atmosphere, Hekate and TegraExplorer payloads bundled as default.

• Launch application.
• Find a cable to connect your device to the Nintendo Switch. For proper work, this should be a cable that is designed for data transmission, not just for charging. It is advisable to use an A-to-C cable and an USB OTG adapter.
• In the "Payloads" category, click the "+" button to select preloaded payload from your device's storage. Or simply transfer your payload to the Rekado folder in the device's memory. Or you can use the bundled payloads (Atmosphere/Hekate/TegraExplorer).
• Enter your Nintendo Switch into RCM mode in any convenient way. Your Nintendo Switch will power on by itself when plugged in, be sure to hold VOLUME +.
• Connect the device to the Nintendo Switch and allow permission for the USB access if necessary. Wait unit payloads chooser dialog will be opened and select which one you want to load.
• Wait for payload to finish loading on your console.

You can get APK (installation file) from Releases form in this repository.

Nothing happens after connecting Nintendo Switch

In most cases this problems occurs if your device doesn't not support OTG connection or it could be just disabled by default (e.g. OnePlus devices). Try to check if your device supports it and check if it is enabled and try again.

Sending payload failed at offset

This problem is in most cases not related to the used device, but to the cable or adapter. It occurs most often due to cables that are not designed to transfer large amounts of data. Try to use another cable or adapter.

SUBMITURB

This problems occurs on device with old USB-controllers installed in their devices (EHCI/USB 2.0). This is device-only problem, that can be fixed with installing additional kernel patches, what is not recommended to do yourself. Only devices with xHCI (USB 3.0) controllers supported now.

All localization files moved to OneSky platform (which I am using for my other projects) and if you want to add/update/check any localization follow this link to start. I will decline all pull requests with your localizations and will accept only OneSky versions, which I will manually add in new updates.

Does application require Root?

Application doesn't require Root on your device.

Can it brick my device/console?

This should not happen when using the "correct" payloads. But I am not responsible for possible problems. It is most important to do nand backup with hekate before you load Custom Firmware for first time.
I also recommend to do nand backups before you do firmware updates.

• DavidBuchanan314 for creating NXLoader.
• ealfonso93 for contributing in this project.
• ELY3M for contributing in this project.