@@@@@@@   @@@@@@  @@@ @@@ @@@  @@@ @@@  @@@ @@@  @@@ @@@@@@@ @@@@@@@@ @@@@@@@
 @@!  @@@ @@!  @@@ @@! !@@ @@!  @@@ @@!  @@@ @@!@!@@@   @@!   @@!      @@!  @@@
 @!@!!@!  @!@!@!@!  !@!@!  @!@!@!@! @!@  !@! @!@@!!@!   @!!   @!!!:!   @!@!!@!
 !!: :!!  !!:  !!!   !!:   !!:  !!! !!:  !!! !!:  !!!   !!:   !!:      !!: :!!
  :   : :  :   : :   .:     :   : :  :.:: :  ::    :     :    : :: :::  :   : :


_      _      _      _      _      _      _      _
)`'-.,_)`'-.,_)`'-.,_)`'-.,_)`'-.,_)`'-.,_)`'-.,_)`'-.,_

                O          .
             O            ' '
               o         '   .
             o         .'
          __________.-'       '...___
       .-'                      ###  '''...__
      /   a###                 ##            ''--.._ ______
      '.                      #     ########        '   .-'
        '-._          ..**********####  ___...---'''\   '
            '-._     __________...---'''             \   l
                \   |                         apc     '._|
                 \__;

Rayhunter is an IMSI Catcher Catcher for the Orbic mobile hotspot.

THIS CODE IS PROOF OF CONCEPT AND SHOULD NOT BE RELIED UPON IN HIGH RISK SITUATIONS

Code is built and tested for the Orbic RC400L mobile hotspot, it may work on other orbics and other linux/qualcom devices but this is the only one we have tested on. Buy the orbic using bezos bucks

NOTE: We don't currently support automated installs on windows, you will have to follow the manual install instructions below

1. Download the latest rayhunter release bundle and extract it.
2. Run the install script inside the bundle corresponding to your platform (install-linux.sh, install-mac.sh).
3. Once finished, rayhunter should be running! You can verify this by visiting the web UI as described below.

Once installed, rayhunter will run automatically whenever your Orbic device is running. It serves a web UI that provides some basic controls, such as being able to start/stop recordings, download captures, and view heuristic analyses of captures. You can access this UI in one of two ways:

1. Over wifi: Connect your phone/laptop to the Orbic's wifi network and visit https://192.168.1.1:8080 (click past your browser warning you about the connection not being secure, rayhunter doesn't have HTTPS yet!)
   • Note that you'll need the Orbic's wifi password for this, which can be retrieved by pressing the "MENU" button on the device and opening the 2.4 GHz menu.
2. Over usb: Connect the Orbic device to your laptop via usb. Run adb forward tcp:8080 tcp:8080, then visit https://localhost:8080. For this you will need to install the Android Debug Bridge (ADB) on your computer, you can copy the version that was downloaded inside the releases/platform-tools/` folder to somewhere else in your path or you can install it manually. You can find instructions for doing so on your platform here, (don't worry about instructions for installing it on a phone/device yet).

• Install ADB on your computer using the instructions above, and make sure it's in your terminal's PATH
  • You can verify if ADB is in your PATH by running which adb in a terminal. If it prints the filepath to where ADB is installed, you're set! Otherwise, try following one of these guides:
    • linux
    • macOS
    • Windows

• on your linux laptop install rust the usual way and then install cross compiling dependences.

• run sudo apt install build-essential libc6-armhf-cross libc6-dev-armhf-cross gcc-arm-linux-gnueabihf

• set up cross compliing for rust:

rustup target add x86_64-unknown-linux-gnu
rustup target add armv7-unknown-linux-gnueabihf

Now you can root your device and install rayhunter by running ./tools/install-dev.sh

• Root your device on windows using the instructions here: https://xdaforums.com/t/resetting-verizon-orbic-speed-rc400l-firmware-flash-kajeet.4334899/#post-87855183

• Build for arm using cargo build

• Run tests using cargo test_pc

• Push the scripts in scripts/ to /etc/init.d on device and make a directory called /data/rayhunter using adb shell (and sshell for your root shell if you followed the steps above)

• you also need to copy config.toml.example to /data/rayhunter/config.toml

• Then run ./make.sh this will build the binary and push it over adb. Restart your device or run /etc/init.d/rayhunter_daemon start on the device and you are good to go.

• Write your code and write tests

• Build for arm using cargo build

• Run tests using cargo test_pc

• push to the device with ./make.sh

• Build docs locallly using RUSTDOCFLAGS="--cfg docsrs" cargo doc --no-deps --all-features --open

LEGAL DISCLAIMER: Use this program at your own risk. We beilieve running this program does not currently violate any laws or regulations in the United States. However, we are not responsible for civil or criminal liability resulting from the use of this software. If you are located outside of the US please consult with an attorney in your country to help you assess the legal risks of running this program.

Good Hunting!