The default firmware for the Dygma Raise.

Setup the Arduino IDE on your system. Make sure you install at least version 1.8.10, since older version may not support all required features.

On macOS, install the Arduino IDE using homebrew cask with brew cask install arduino or download the application from the official website and move it to your /Applications folder.

On Linux, your distribution's package manager probably includes the Arduino IDE, but it may be an out of date version. If your distribution installs a version of Arduino before 1.8.10 or so, you'll need to install the Arduino IDE following the instructions on the wiki.

If you install Arduino into some place that's /not/ /usr/local/arduino, you'll need to set the $ARDUINO_PATH environment variable to the directory containing the arduino and arduino-builder binaries.

mkdir -p $HOME/Documents/Arduino
cd $HOME/Documents/Arduino

mkdir -p $HOME/Arduino
cd $HOME/Arduino

arduino --install-boards arduino:samd

mkdir -p hardware/dygma

## then clone the hardware definitions to make them available to the arduino environment
git clone --recursive https://github.com/Dygmalab/Kaleidoscope-Bundle-Dygma.git hardware/dygma/samd

Remember to keep updated the Kaleidoscope Bundle by running the following GIT commands in the samd folder before compiling each new version, not all the changes will be made in the Raise-FW repo.

To do so, just run:

git pull
git submodule sync
git submodule update

git clone https://github.com/Dygmalab/Raise-Firmware.git

Before you begin, make sure your Raise is connected to your computer.

The updated makefile now supports Windows, Mac & Linux

First install dependencies with chocolately using:

choco install make

make config

Will show the current configuration of the makefile.

Modify it to fit your current environment.

cd Raise-Firmware
make flash

Open the sketch you wish to flash (for example, Raise-Firmware.ino).

Click the Upload button or press Ctrl-U.

Hold down the key in the top left corner of your keyboard (Esc by default), until the compile finishes and the upload begins.

Focus API KeyMap

MakeFile documentation