Skip to content

DWIN T5UID1 touchscreen firmware for 3D printers running Klipper.

License

Notifications You must be signed in to change notification settings

Desuuuu/DGUS-reloaded-Klipper

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

16 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

DGUS-reloaded-Klipper

DWIN T5UID1 touchscreen firmware for 3D printers running Klipper.

Requires using a modified version of Klipper to work properly, which can be found in this repository.

Disclaimer

This software is provided without any warranty. You are solely responsible for your use of it.

Features

This firmware was inspired by Creality printers' touchscreen firmware. Some features include:

  • Status message available on most screens
  • Z offset, manual and automatic leveling
  • PID autotuning
  • Volume adjustment
  • Brightness adjustment
  • BLTouch reset shortcut (if a BLTouch is installed)
  • Playing sounds using M300 (the frequency parameter is the index of the audio file)

Focus was also put on making this firmware as easy and safe to use as possible from a user perspective.

Compatibility

This firmware should be compatible with printers equipped with the following hardware:

  • 480x272 DWIN T5UID1 touchscreen
  • Single extruder
  • Heated bed
  • (Optional) Single controllable fan
  • (Optional) Bed leveling sensor (including a BLTouch)

It could also work on machines equipped with more hardware (dual extruder, etc.) but will lack on-screen controls for such hardware.

Testing has been done on the following machines:

  • Creality CR-10S Pro

Prerequisites

You have to use this modified version of Klipper. Make sure to enable the serial connection to the screen while configuring the MCU firmware.

The only modification required to your Klipper configuration file is to add this section:

[t5uid1]
firmware: dgus_reloaded

For a list of available options, see the sample-t5uid1.cfg file.

Example Klipper configurations are available in this repository.

Wiki

Modification / Compilation

You can make modifications to the firmware by opening the DWprj.hmi file in DGUS Tools.

After finishing your modifications, you will need to press the Generate button to create the 3 required binary files.

You can then run the rename script and flash your touchscreen using the resulting DWIN_SET folder.

Credits

Material Author Modified License
Klipper logo KevinOConnor Yes GPLv3
Feather icons Cole Bemis Yes MIT
3D Printing Line icons Sam Baines Yes CC-BY 3.0
Fan icon Atif Arshad Yes CC-BY 3.0
Snow icon Shashank Singh Yes CC-BY 3.0
Electric Motor icon Verry Yes CC-BY 3.0
Probe icon Mohamed Mbarki Yes CC-BY 3.0
Wheel icon Deivid Sáenz Yes CC-BY 3.0
Ruler icon Three Six Five - CC-BY 3.0

License

GPLv3