OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.
Sunshine!
Built firmware images are available for many architectures and come with a package selection to be used as WiFi home router. To quickly find a factory image usable to migrate from a vendor stock firmware to OpenWrt, try the Firmware Selector.
If your device is supported, please follow the Info link to see install instructions or consult the support resources listed below.
An advanced user may require additional or specific package. (Toolchain, SDK, ...) For everything else than simple firmware download, try the wiki download page:
To build your own firmware you need a GNU/Linux, BSD or MacOSX system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.
You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.
binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.7+ rsync subversion unzip which
-
Run
./scripts/feeds update -ato obtain all the latest package definitions defined in feeds.conf / feeds.conf.default -
Run
./scripts/feeds install -ato install symlinks for all obtained packages into package/feeds/ -
Run
make menuconfigto select your preferred configuration for the toolchain, target system & firmware packages. -
Run
maketo build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.
git clone https://github.com/TerryLip/AX6NSS.git nss
cd nss
./scripts/feeds update -a
./scripts/feeds install -a
rm -rf feeds/luci/modules/luci-base
rm -rf feeds/luci/modules/luci-mod-status
rm -rf feeds/packages/utils/coremark
rm -rf feeds/packages/net/v2ray-geodata
rm -rf feeds/nss-packages/utils/mhz
svn export https://github.com/immortalwrt/luci/branches/master/modules/luci-base feeds/luci/modules/luci-base
svn export https://github.com/immortalwrt/luci/branches/master/modules/luci-mod-status feeds/luci/modules/luci-mod-status
复制immortalwrt两项时候，如果以上命令行无法下载，可以直接git 网站下载整个luci到本地，
https://github.com/immortalwrt/luci
右侧代码git下载zip压缩包，然后解压复制 luci-base&luci-mod-status两个目录到本地nss文件夹对应目录即可
rm -rf ./tmp
./scripts/feeds update -a
./scripts/feeds install -a
cp AX6.config .config
make download -j$(nproc)
make -j$(nproc) || make -j1 V=s
The main repository uses multiple sub-repositories to manage packages of
different categories. All packages are installed via the OpenWrt package
manager called opkg. If you're looking to develop the web interface or port
packages to OpenWrt, please find the fitting repository below.
-
LuCI Web Interface: Modern and modular interface to control the device via a web browser.
-
OpenWrt Packages: Community repository of ported packages.
-
OpenWrt Routing: Packages specifically focused on (mesh) routing.
-
OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).
For a list of supported devices see the OpenWrt Hardware Database
- Forum: For usage, projects, discussions and hardware advise.
- Support Chat: Channel
#openwrton oftc.net.
- Bug Reports: Report bugs in OpenWrt
- Dev Mailing List: Send patches
- Dev Chat: Channel
#openwrt-develon oftc.net.
OpenWrt is licensed under GPL-2.0