3D Printed Headphone Headband
Print {1} and {4} in 95a TPU and the rest in petg or nylon. PLA+ or PLA Pro also work but may not last as long.
Its a fairly simple and straight forward assembly
Insert the Adjustment Bands into the Center Section.{1}{2}
Secure with 2 M3x16 Screws, one on either Side.
For the Yokes press the m3x5x5 heat insert into the bottom hole in the yoke.{5}
Then feed another m3x16 screw into the hole in the Adjustment Arm fromt the top followed by an m3 washer on the other side.{3}
Screw the Adjustment Arm into the Yoke and secure with loctite on the other side if desired.{5}{3}
Insert the Adjustment Arm (or stock HD6x0 yoke) through the Comfort Strap and into the Adjustment band on either side.{1}{2}{3}{5}