Setup and Config
Getting and Creating Projects
Basic Snapshotting
Branching and Merging
Sharing and Updating Projects
Inspection and Comparison
Patching
Debugging
External Systems
Server Admin
Guides
- gitattributes
- Command-line interface conventions
- Everyday Git
- Frequently Asked Questions (FAQ)
- Glossary
- Hooks
- gitignore
- gitmodules
- Revisions
- Submodules
- Tutorial
- Workflows
- All guides...
Administration
Plumbing Commands
- 2.42.1 → 2.46.0 no changes
-
2.42.0
08/21/23
- 2.36.1 → 2.41.2 no changes
-
2.36.0
04/18/22
SYNOPSIS
git ls-tree [-d] [-r] [-t] [-l] [-z] [--name-only] [--name-status] [--object-only] [--full-name] [--full-tree] [--abbrev[=<n>]] [--format=<format>] <tree-ish> [<path>…]
DESCRIPTION
Lists the contents of a given tree object, like what "/bin/ls -a" does in the current working directory. Note that:
-
the behaviour is slightly different from that of "/bin/ls" in that the <path> denotes just a list of patterns to match, e.g. so specifying directory name (without
-r
) will behave differently, and order of the arguments does not matter. -
the behaviour is similar to that of "/bin/ls" in that the <path> is taken as relative to the current working directory. E.g. when you are in a directory sub that has a directory dir, you can run git ls-tree -r HEAD dir to list the contents of the tree (that is
sub/dir
inHEAD
). You don’t want to give a tree that is not at the root level (e.g.git ls-tree -r HEAD:sub dir
) in this case, as that would result in asking forsub/sub/dir
in theHEAD
commit. However, the current working directory can be ignored by passing --full-tree option.
OPTIONS
- <tree-ish>
-
Id of a tree-ish.
- -d
-
Show only the named tree entry itself, not its children.
- -r
-
Recurse into sub-trees.
- -t
-
Show tree entries even when going to recurse them. Has no effect if
-r
was not passed.-d
implies-t
. - -l
- --long
-
Show object size of blob (file) entries.
- -z
-
\0 line termination on output and do not quote filenames. See OUTPUT FORMAT below for more information.
- --name-only
- --name-status
-
List only filenames (instead of the "long" output), one per line. Cannot be combined with
--object-only
. - --object-only
-
List only names of the objects, one per line. Cannot be combined with
--name-only
or--name-status
. This is equivalent to specifying--format='%(objectname)'
, but for both this option and that exact format the command takes a hand-optimized codepath instead of going through the generic formatting mechanism. - --abbrev[=<n>]
-
Instead of showing the full 40-byte hexadecimal object lines, show the shortest prefix that is at least <n> hexdigits long that uniquely refers the object. Non default number of digits can be specified with --abbrev=<n>.
- --full-name
-
Instead of showing the path names relative to the current working directory, show the full path names.
- --full-tree
-
Do not limit the listing to the current working directory. Implies --full-name.
- --format=<format>
-
A string that interpolates
%(fieldname)
from the result being shown. It also interpolates%%
to%
, and%xNN
whereNN
are hex digits interpolates to character with hex codeNN
; for example%x00
interpolates to\0
(NUL),%x09
to\t
(TAB) and%x0a
to\n
(LF). When specified,--format
cannot be combined with other format-altering options, including--long
,--name-only
and--object-only
. - [<path>…]
-
When paths are given, show them (note that this isn’t really raw pathnames, but rather a list of patterns to match). Otherwise implicitly uses the root level of the tree as the sole path argument.
Output Format
The output format of ls-tree
is determined by either the --format
option, or other format-altering options such as --name-only
etc.
(see --format
above).
The use of certain --format
directives is equivalent to using those
options, but invoking the full formatting machinery can be slower than
using an appropriate formatting option.
In cases where the --format
would exactly map to an existing option
ls-tree
will use the appropriate faster path. Thus the default format
is equivalent to:
%(objectmode) %(objecttype) %(objectname)%x09%(path)
This output format is compatible with what --index-info --stdin
of
git update-index expects.
When the -l
option is used, format changes to
%(objectmode) %(objecttype) %(objectname) %(objectsize:padded)%x09%(path)
Object size identified by <objectname> is given in bytes, and right-justified
with minimum width of 7 characters. Object size is given only for blobs
(file) entries; for other entries -
character is used in place of size.
Without the -z
option, pathnames with "unusual" characters are
quoted as explained for the configuration variable core.quotePath
(see git-config[1]). Using -z
the filename is output
verbatim and the line is terminated by a NUL byte.
Customized format:
It is possible to print in a custom format by using the --format
option,
which is able to interpolate different fields using a %(fieldname)
notation.
For example, if you only care about the "objectname" and "path" fields, you
can execute with a specific "--format" like
git ls-tree --format='%(objectname) %(path)' <tree-ish>
FIELD NAMES
Various values from structured fields can be used to interpolate into the resulting output. For each outputting line, the following names can be used:
- objectmode
-
The mode of the object.
- objecttype
-
The type of the object (
commit
,blob
ortree
). - objectname
-
The name of the object.
- objectsize[:padded]
-
The size of a
blob
object ("-" if it’s acommit
ortree
). It also supports a padded format of size with "%(objectsize:padded)". - path
-
The pathname of the object.
GIT
Part of the git[1] suite