This article needs additional citations for verification. (August 2024) |
The VCS 3 (or VCS3; an initialism for Voltage Controlled Studio, version #3) is a portable analog synthesizer with a flexible modular voice architecture introduced by Electronic Music Studios (EMS) in 1969.[# 1]
EMS released the product under various names. Logos printed at the console's front left (see photos) say "V.C.S. 3" on the most widely sold version; "The Putney (VCS 3)" on the earlier version; and "The Synthi (VCS 3) II" on the later version "Synthi VCS 3 II".[# 2]
History
editThe VCS 3 was created in 1969 by Peter Zinovieff's EMS company. The electronics were designed largely by David Cockerell, and its distinctive appearance was the work of electronic composer Tristram Cary. It was one of the first portable commercially available synthesizers, in the sense that it was housed entirely in a small wooden case, unlike synths from American manufacturers such as Moog Music, ARP and Buchla, which had large cabinets and could take up entire rooms.
The VCS 3 cost just under £330 in 1969. Some people found it unsatisfactory as a melodic instrument due to its inherent tuning instability.[1] This arose from the instrument's reliance on the then current method of exponential conversion of voltage to oscillator frequency—an approach that other companies also implemented with fewer tuning issues. However, the VCS 3 was renowned as an extremely powerful generator of electronic effects and processor of external sounds for its cost.[according to whom?]
The first album recorded using only the VCS 3 was The Unusual Classical Synthesizer on Westminster Gold.[2]
The VCS 3 was popular among progressive rock bands, and was used on recordings by Franco Battiato, The Moody Blues, The Alan Parsons Project, Jean-Michel Jarre, Todd Rundgren, Hawkwind, Curved Air, Brian Eno (with Roxy Music and as a solo artist or collaborator), King Crimson, The Who, Gong, and Pink Floyd, and many others. The VCS 3-generated bass sound at the beginning of Pink Floyd's "Welcome to the Machine" forms the foundation of the song, with its other parts heard in response. Two VCS 3s and a Sequencer 256 were featured in the 1978 film 'The Shout'.[3]
Description
editThe VCS 3 has three oscillators (the first two normal voltage-controlled oscillators; the third a low-frequency oscillator), a noise generator, two input amplifiers, a ring modulator, 24 dB/octave low-pass voltage-controlled filter,[citation needed] a trapezoid envelope generator, a joystick controller, a voltage-controlled spring reverb unit, and two stereo output amplifiers. Unlike most modular synthesiser systems, which used cables to link components, the VCS 3 uses a distinctive patchboard matrix where pins are inserted to connect its components.
Keyboards controller
editAlthough the VCS 3 is often used for generating sound effects due to lack of a built-in keyboard, external keyboard controllers were available for melodic play. The DK1, produced in 1969, is an early velocity-sensitive monophonic keyboard for VCS 3 with an extra VCO and VCA.[# 3] In 1972 it was extended for duophonic play as DK2.[# 4] Also in 1972, the Synthi AKS was released, as well as a digital sequencer with a touch-sensitive flat keyboard, the KS sequencer,[# 5] and its mechanical keyboard version, DKS.[# 6]
Related models
editThe VCS 3's basic design was reused by EMS in many other of their own products,[citation needed] most notably the EMS Synthi 100 (1971),[# 7] the Synthi A (1971),[# 8] and AKS (1972, essentially a VCS 3 in a plastic briefcase). The AKS also has a sequencer built into the keyboard's lid.[# 9]
A former agent of EMS in the United States, Ionic Industries in Morristown, New Jersey, released a portable-keyboard VCS 3 clone in 1973. The Ionic Performer, whose circuitry is based on the VCS 3's, replaced the patchboard matrix with over 100 push-buttons, and added a built-in keyboard and effects units.[4]
-
EMS Synthi AKS (1972)[# 9]
Synthi A
editThe EMS Synthi A has the same electronics as the VCS 3, but was rehoused in a Spartanite briefcase. Instead of routing signals using patch cables, like Moog products, it uses a patch matrix with resistive pins. The 2700 ohm resistors soldered inside each pin vary in tolerance, indicated by different colours: red pins have 1% tolerance, white have 5%, and green pins are attenuating pins with a resistance of 68,000 ohms.
The later Synthi AKS incorporated an early digital 256 event KS (Keyboard Sequencer) sequencer in the lid, with input provided by a capacitance-sensitive Buchla-style keyboard.
Perhaps its most prominent use is in the introduction to The Alan Parsons Project's I Robot. (1977). VCS 3 synthesisers were also used alongside a traditional chamber music ensemble for the soundtrack to the BBC's Life On Earth nature documentary series, composed by Edward Williams.[5]
Along with Klaus Schulze and Tangerine Dream, other frequent users of the instrument include Cabaret Voltaire, Tim Blake & Miquette Giraudy of Gong, Richard Pinhas of Heldon, Merzbow, Thomas Lehn, Cor Fuhler and Alva Noto.
Development
editThe original VCS No.1 was a hand-built rack-mount unit with two oscillators, one filter and one envelope, designed by Cockerell before the formation of EMS. When a benefactor, Don Banks, asked Zinovieff for a synthesiser, Zinovieff and Cockerell decided to work together on an instrument that was small and portable but powerful and flexible.
Notable users
edit- BBC Radiophonic Workshop[6]
- Brian Eno[7]
- Howie B on U2's Pop[8]
- Jean-Michel Jarre[9]
- Merzbow on Door Open at 8 AM[10][11][12][13]
- Pete Townshend[14][15]
- Pink Floyd on Obscured by Clouds (1972), The Dark Side of the Moon (1973), and Wish You Were Here (1975)[16]
- King Crimson on Lizard (1970) and Earthbound (1972)[17][18]
- Todd Rundgren[19][20]
- Tangerine Dream[21]
References
edit- ^ Reid, Gordon (November 2000). "All About EMS, Part 1". Sound on Sound. Archived from the original on 2016-03-03.
- ^ "unusualstuff - krakatack". Sites.google.com. Retrieved 2020-04-12.
- ^ "EMS VCS 3 "The Shout" 1978 | Pin Electronics".
- ^ Dennis Bathory-Kitsz. "Killer – My Ionic "Performer" Synth (from Ionic Industories, made by Alfred Mayer)".
- ^ Power, Mike. 'Release of Life On Earth soundtrack delivers music as pioneering as the show', in The Guardian, 2 November 2009
- ^ Rawlins, Sarah (31 March 2021). "The Birth of the Radiophonic Workshop". National Science and Media Museum blog. National Science and Media Museum. Retrieved 2024-08-12.
- ^ "How Brian Eno Created "Discreet Music" | Reverb Machine". reverbmachine.com. 3 September 2019. Retrieved 2022-10-09.
- ^ "Flood & Howie B: Producing U2's Pop". Sound On Sound. July 1997. Archived from the original on 2015-06-07.
- ^ "Three Questions With Jean-Michel Jarre". Synth History. 20 October 2022. Retrieved 2024-08-12.
EMS VCS 3, my first synth ever, still working and present on each of my albums as a ritual.
- ^ Door Open at 8 AM. Bandcamp (Media notes). Retrieved 2024-10-02.
- ^ "EMS Synthesizers: Brits en eigenzinnig". interface.nl (in Dutch). Archived from the original on 2024-10-04. Retrieved 2024-10-04.
- ^ "Silent Modular Wars!!". merzbow.net (in Japanese). Archived from the original on 2024-10-04. Retrieved 2024-10-04.
- ^ Miron Ghiu (26 February 2018). "A short conversation with the legendary noise artist, Merzbow". blackrhinoradio.com. Archived from the original on 2024-10-04. Retrieved 2024-10-04.
- ^ "Three Questions With Pete Townshend". Synth History. 27 April 2020. Retrieved 2024-08-12.
- ^ Marks, Ben (1 October 2015). "Rise of the Synthesizer: How an Electronics Whiz Kid Gave the 1980s Its Signature Sound". Collectors Weekly. Retrieved 2024-08-12.
- ^ The, Pink Floyd (1973). The Dark Side Of The Moon (Media notes).: “DAVID GILMOUR Vocals, Guitars, VCS3 / NICK MASON Percussion, Tape Effects / RICHARD WRIGHT Keyboards, Vocals, VCS3 / ROGER WATERS Bass Guitar, Vocals, VCS3, Tape Effects”.
- ^ Logan, Nick (6 June 1970). "KING CRIMSON — biggest one man band in business". New Musical Express. Retrieved 2024-08-12.
- ^ Sleeve notes for Earthbound.
- ^ "Todd Rundgren". Jazz Rock Soul. 30 March 2022.
- ^ Zanca, Nick (23 November 2022). "The Wizard Speaks: An Interview With Todd Rundgren". Reverb.com. Retrieved 2024-08-12.
- ^ The Cambridge Companion to Krautrock. Cambridge University Press. 27 October 2022. ISBN 9781009041591.
Bibliography
edit- Hinton, Graham (December 2002). "EMS: The Inside Story". Electronic Music Studios (Cornwall). Archived from the original on 2013-05-21. Retrieved 2011-09-30.
- Hinton, Graham (December 2002). "A Guide to the EMS Product Range - 1969 to 1979". Electronic Music Studios (Cornwall). Archived from the original on 2013-10-31.
- Reid, Gordon (November 2000). "All About EMS, Part 1". Sound on Sound. Archived from the original on 2016-03-03.
- Reid, Gordon (December 2000). "All About EMS, Part 2". Sound on Sound. Archived from the original on 2011-09-08.
- Models
- ^ a b "VCS3 (aka The Putney) – The Products". Electronic Music Studios (Cornwall). Archived from the original on 2013-10-31.
- ^ "Synthi VCS3 II – The Products". Electronic Music Studios (Cornwall). Archived from the original on 2013-10-31.
- ^ "DK1 (aka The Cricklewood) – The Products". Electronic Music Studios (Cornwall). Archived from the original on 2013-10-31.
- ^ "DK2 – The Products". Electronic Music Studios (Cornwall). Archived from the original on 2013-10-31.
- ^ "KS – The Products". Electronic Music Studios (Cornwall). Archived from the original on 2013-10-31.
- ^ "DKS – The Products". Electronic Music Studios (Cornwall). Archived from the original on 2013-10-31.
- ^ a b "Synthi 100 (formerly Digitana, aka the Delaware) – The Products". Electronic Music Studios (Cornwall). Archived from the original on 2013-10-31. Retrieved 2011-09-30.
- ^ a b "Synthi A (formerly Portabella) – The Products". Electronic Music Studios (Cornwall). Archived from the original on 2013-10-31.
- ^ a b "Synthi AKS – The Products". Electronic Music Studios (Cornwall). Archived from the original on 2013-10-31.
Further reading
edit- "Retro: VCS3". Future Music. No. 63. Future Publishing. November 1997. p. 55. ISSN 0967-0378. OCLC 1032779031.
External links
editOfficial
edit- https://emssynthesisers.co.uk/
- "An advertisement for the company, "every nun needs a Synthi"". Electronic Music Studios (London), Ltd. Archived from the original on 2012-07-17.
- "EMS Home". EMS Rehberg (Germany).
Articles
edit- "EMS VCS3 in the 1970s, part 1". The Music Aficionado. 2 September 2020. Retrieved 2024-08-13.
- "EMS VCS3 in the 1970s, part 2". The Music Aficionado. 14 October 2020. Retrieved 2024-08-13.
Modification and resources
edit- Graham Hinton. "A Guide to EMS VCS3 & Synthi A/AKS Modifications & Servicing". Hinton Instruments.
- "Information on the EMS synthi A, KS and VCS3".
Software emulation
edit- "XILS 3, 4 and Vocoder 5000". — A VST simulation of a VCS3/VCS4 with Synthi Sequencer, and Vocoder 5000 by XILS-lab
- "Synthi Avs Plug-In". EMS Rehberg. — A (commercial) VST simulation of a VCS3/Synthi A by EMS Rehberg
- "Cynthia". — A free VST based on the architecture of VCS3/Synthi A by Ninecows
- "iVCS3". — Official EMS iOS emulator by apeSoft, with preface by Peter Zinovieff (screen shot)
EMS Synthi A
edit- "EMS' homepage (last updated August 1998)". Cornwall: Electronic Music Studios. Archived from the original on 2013-11-25.
- "Every Nun Needs a Synthi" (ad). Archived from the original on 2012-07-17.
- "VCS3 & Synthi A Modifications". Hinton Instruments. (last updated 2013-12-14)
- "Synthi A-VS plugin". Germany: EMS Rehberg. — A commercial VST simulation of a Synthi A by German EMS
- A freeware VST simulation of a Synthi A
- The EMS SYNTHI BLOG