An open source cross-platform USB stack for embedded system

ESP32S2 native USB library. Implemented few common classes, like MIDI, CDC, HID or DFU (update).

Arduino library for TinyUSB

virtual debug pod for RP2040 "Raspberry Pi Pico" with no added hardware

UF2 bootloader based on TinyUSB for embedded devices such as ESP32S2, STM32F4 and iMX RT10xx

Run DuckyScript payloads on a USB Nugget!

CMSIS-DAP using TinyUSB

ESP32S2/S3 native USB library. Implemented few common classes, like MIDI, CDC, HID or DFU (update).

USBRetro: Robust USB host controller input for retro consoles.

RP2040-based USB DMX dongle with integrated web server

An application level TinyUSB USB MIDI Host driver for the RP2040

A single key keyboard, a demonstration of a USB HID device for the Raspberry Pi Pico in C

An open-source DAPLink Arduino Library supports Keil MDK, IAR Embedded Workbench, OpenOCD, and other commonly used IDE.

A CLI-driven demo of a Raspberry Pi Pico operating as a USB Mass Storage Class Host

Using the native USB interface of ESP32 S2/S3

Rust wrapper for the TinyUSB library

Minimal example project for using TinyUSB with Pico-PIO-USB on a Raspberry Pi Pico

Pi Pico / RP2040 Trackball firmware and 3D design

This code allows you to use the Pimoroni RGB Keypad for the Raspberry Pi Pico as a macro keypad in C++

Code for the Pimoroni PGA2040 (a Raspberry Pi RP2040-powered board) to act as a USB keyboard by scanning the membrane of a Model M 122-key keyboard.