☢☢ A geiger counter application for the Flipper Zero ☢☢

Custom firmware for Geiger counters/radiation meters (FS2011, Bosean FS-600, FS-1000, FS-5000, FNIRSI GC-01)

Interactive air multisensor

IoT Geiger Counter with ESP32, OLED Display, Thingspeak Channel and MQTT

Nuclear radiation sensor with photodiode as a detector. Photodiode doesn't require high voltages as GM tubes do. Smaller size makes better resolution. Side effect is electronic must be more sensitive.

Feather Huzzah ESP2866/ESP32 + Featherwing 128x64 OLED Arduino addon to Mightohm Gieger

SMD hardware version of the Arduino IDE compatible 10MHz DiY Geiger counter

Analysis of classic works describing the color blue.

An Arduino / Geiger Counter based Random Number Generator

A nuclear radiation sensor with a Geiger–Müller (GM) tube as the detector. This widely used solution is cost-effective, easy to construct, and ideal for measuring ionizing radiation.

Reader for the RADEX RD1212 and the RADEX ONE Geiger counters.

Utility to read out Gamma Scout Geiger counters from Linux

This is Geiger-Muller Counter

Low-cost USB Geiger counter device using STS-5 tube, ATTiny24 and Python-written host software.

Taller IoT para construir un medidor Geiger conectado. Basado en el ESP8266, MQTT, Node-RED e integrado en la red GMC

GM (Geiger-Muller) Tube Conversion Factor Calculator

Radioactive decay based random number generator using Geiger counter, STM32 and HAL.

Python library to communicate with GQ Electronics GMC Geiger Counters

Geiger Counter in MATLAB / Счетчик Гейгера на MATLAB

AVR-based Geiger Counter with USB/RS232 output and TRNG interface