Time-based cover with customizable scripts or entity to trigger opening, stopping and closing. Position is calculated based on the fraction of time spent by the cover traveling up or down. State can be updated with information based on external sensors.

Android Home Automation Hub with support for ZigBee And 433 MHz RF devices

Generic IOT platform for Home Automation based on ESP8266/ESP32

PiFunk Radio Transmitter - with FM/AM-Modulation for HAM-Bands (CB 27 & PMR 446)

A dirty, but easy, way to capture and replay 433mhz messages

The unofficially supported ioquake3 engine by pedrxd for the game Urban Terror 4.2/4.3

Use wall mount switches that trigger MQTT commands

RESTful API for the node-rcswitch binding based on Node.js/restify.

A pure python client to connect to a pilight daemon. Sendind and receiving commands can be asynchronous.

RF.Guru High power LoRa APRS Tracker for automobile use, 433mhz 500mW 13.8v

串口型315,433模块使用esp8266连接wifi远程控制

ATTINY13A 433MHz receiver

Homey support for LEDS-C4 Ceiling Fans

GPS NMEA offline drone locator using Arduino, display, internal GPS and remote tracked GPS through radio

Send a 433mhz packet whenever an mqtt message gets received

ESP32 RF button press detect using non blocking RMT for common EV1527 and many others without a library in Arduino

NewRemoteSwitch library for Arduino. Made by Randy Simons

A .net package to get the communications going with a HomeWizard. You can use this package to control switches/dimmers and read all the data from the HomeWizard.

RemoteSwitch library for Arduino