OpenSCAD case for the Tiva EK-TM4C123GXL LaunchPad

This is a 3-part enclosure for a TivaLP mated with a custom carrier board (AKA, shield board). The two main parts are the Bottom and the Lid. A third part is a clear or semi-clear light-pipe printed into the Lid. This requires a printer with a multi-filament head in order to print as one piece. Printing the light-pipe separately is an option, but would require a degree of manual finishing to the light-pipe and the receptor hole in the Lid.

Comments inside the OpenSCAD file describe how to create the three plots and also how to manipulate the file to produce fit-check "plots" where the pieces are all arranged in an "as assembled" fashion.

The carrier board is custom. Details on this board are contained in the TivaLPS_HW folder. The PCB can be fabricated using the included Gerber/NC data or the Altium database can be modified to create a custom shield board in the same form-factor as is required by the 3D case.