Skip to content

sapcc/octavia-f5-provider-driver

Repository files navigation

Octavia Provider Driver for F5 BigIP devices

This is the Octavia provider driver for F5 BigIP appliances. It communicates with BigIP devices via the declarative AS3 API. The worker uses the driver-agent API, but it hooks more deeply into Octavia (similar to the Octavia Amphora driver) than the Provider Agents concept permits, e. g. by accessing the database directly.

F5-specific configuration

F5-specific config options

There are lots of F5-specific configuration options. They can be found in octavia_f5/common/config.py.

  • If agent_scheduler in the [networking] section of the configuration is set to loadbalancer, new load balancers are scheduled to the device with the least amount of load balancers. This is the default. If it is set to listener, new load balancers are scheduled to the device with the least amount of listeners.

Listener type to AS3 service class mapping

Mapping happens in octavia_f5/restclient/as3objects/service.py.

Openstack listener type AS3 service class Notes
TCP Service_L4 Uses L4 acceleration
UDP Service_UDP
HTTP Service_HTTP
HTTPS Service_L4 Uses L4 acceleration, since HTTPS simply gets passed through without decryption
PROXY Service_TCP Does not use L4 acceleration, since it's incompatible with the Proxy Protocol iRule
TERMINATED_HTTPS Service_HTTPS

Health monitor configuration mapping

Since health monitors have different semantics in Octavia than on the BigIP (and inconsistent naming across API and database), we have to map Octavia health monitor parameters to AS3/BigIP parameters in a specific way. We try to name the parameters on the Elektra web GUI in an explanatory way.

Elektra web GUI CLI/API database AS3/BigIP
max_retries rise_threshold
Max Retries[1] max_retries_down fall_threshold timeout[2]
Probe Timeout timeout timeout
Interval delay delay interval

[1] Original Elektra PR superseeded by new Elektra PR which has been merged

[2] Calculated from database parameters like this: fall_threshold * delay + 1 (see code)

Special database handling

This provider driver uses Octavias mariadb database to store some data, but doesn't define any new tables. Instead, otherwise unused tables/columns are used in a specific way:

  • The load_balancer table is used like this:
    • server_group_id holds the name of the device the load balancer is scheduled to. Compare with compute_flavor in the amphora table below. Note that server_group_id is not shown by the CLI when running openstack loadbalancer show.
  • The amphora table is used in two ways:
    • For each load balancer an amphora entry is created. This is done to prevent problems with Octavias health manager, which makes assumptions about amphora entries.
      • compute_flavor holds the name of the device the load balancer is scheduled to. Compare with server_group_id in the load_balancer table above. This can be used to query the device via openstack loadbalancer amphora show $LB_ID.
      • Since an amphora table entry is never updated as long as its respective load balancer lives, the updated_at field will always be null until the load balancer is being deleted, which will update the amphora entry status to DELETED as well.
    • For each F5 device that is managed by a provider driver worker a special entry is created in the amphora table.
      • compute_flavor holds the name of the managed F5 device
      • cached_zone holds the hostname
      • load_balancer_id will always be null
      • role (must contain one of the values defined in the amphora_roles table) holds information about whether the device is in active status (MASTER) or standby status (BACKUP)
      • status (must contain one of the values defined in the provisioning_status table) holds device state.
        • ALLOCATED means the the device is offline (no entry in device status response)
        • READY means the device is online
        • BOOTING if it was offline and is now back online. In this case the device receives a full sync and the status is set to READY.
      • If vrrp_interface is set to 'disabled' for a given F5 amphora entry, the scheduler will not take that device into account when scheduling new load balancers.
      • vrrp_priority holds the amount of listeners on that device

Python modules

  • octavia_f5/api: Driver, running in Octavia main process (extends AmphoraProviderDriver)
  • octavia_f5/cmd: Entry points for house-keeping and status manager.
  • octavia_f5/controller: Communication with BigIP device
    • status_manager: Manages table entries representing BigIP devices
    • controller_worker: REST endpoints for Octavia, synchronization loop
    • sync_manager: Builds AS3 declarations and sends them to the BigIP device.
    • status: Methods for setting status in database. Used by controller_worker.
  • db: Repository classes (CRUD abstractions over sqlalchemy ORM objects)
  • network: Layer 2 network drivers (Neutron hierarchical port binding driver, no-op driver)
  • restclient: Classes for building AS3 declarations. Used by sync_manager and status_manager.

About

No description, website, or topics provided.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages