Skip to content

nixos-bsd/nixbsd

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

NixBSD

NixBSD is an attempt to make a reproducible and declarable BSD, based on NixOS. Although theoretically much of this work could be copied to build other BSDs, all work thus far has been focused on building a FreeBSD distribution.

Structure

As of January 2023, NixBSD consists of 3 main repositories:

A fork of upstream nix with changes to allow building on FreeBSD and for FreeBSD platforms. The changes are fairly minor and mostly around fixing bugs in the existing FreeBSD port.

It is likely that these can be upstreamed fairly quickly with some cleanup.

A fork of upstream nixpkgs with support for the FreeBSD platform and a variety of FreeBSD packages.

This adds a few new supported systems, including x86_64-freebsd, the host system we have been using for most development. It's based off staging and has some changes to the stdenv that also affects stdenv, so you have to rebuild everything from bootstrap.

This will require a fair amount of work to clean up to an upstreamable state, but it should not require massive reorganization

This repository contains modules for building a system, like the nixos directory in nixpkgs. When possible, modules are taken directly from nixpkgs without copying (see references to extPath in module-list.

Some modules are copied with modification from nixpkgs. The original files remain under the MIT License and copyright the original contributors.

Unfortunately, upstreaming NixBSD into NixOS would require a fair amount of reorganization and changes to init systems, so is unlikely to happen anytime soon.

freebsd-src

You may notice that there is no fork of freebsd-src. The changes required to FreeBSD code are minimal and concern mostly the build system, so are included as patches in nixpkgs, or as calls to sed in package files.

Building

The easiest way to test module changes is to build a virtual machine from Linux.

You can build sample configurations (directories in configurations) easily with the flake output .#<configName>.<outputName>. The base configuration provides a simple starting point with a user account and default services.

All outputs from system.build are available, plus a few more. When developing you may want:

  • toplevel: Top-level derivation, containing the kernel, etc, software, activation script, and more. You'll find it linked in the VM image at /run/current-system after activation.
  • vm: A script that runs a virtual machine containing the toplevel, booted with UEFI. The system is booted from a writable CoW copy, so activation will run and you can edit files
  • closureInfo: The closure-info of toplevel.drvPath.
  • vmClosureInfo: the closure-info of vm.drvPath.

The closureInfo and vmImageRunnerClosureInfo outputs include metadata about the build closure, including a list of all packages. Keeping a copy of this around will prevent nix from garbage-collecting all of your builds.

Subtituter

There is a substituter (binary cache) in the flake. If Artemis remembers, this should contain everything in .#base.vmImageRunnerClosureInfo and could save you a few hours.

Note, however, that trusted substituters can maliciously modify outputs, so only use it if you trust Artemis.

Tips

  • Building vmImageRunner for a minimal configuration can take over 8 hours on a fast machine, so keeping around vmImageRunnerClosureInfo is highly recommended. Just base.vmImageRunnerClosureInfo takes over 30GiB though, so you may want to delete it if you're low on space.
  • Some package checks may fail intermittently under heavy load. If that happens you may want to build with --max-jobs 4 or lower so fewer packages are competing for the CPU at the same time.
  • To see what is happening, you might want to use nix-output-monitor. For flake commands you can replace nix with nom to use it.

Contributing

We'd be happy to review any pull requests! If you have any problems please open an issue on this repo, we're using this issue tracker for nix and nixpkgs issues as well.

Contributions should be formatted with nixfmt. While you can use nix fmt, that will rebuild the universe. You may want to run nix-shell -p nixfmt --run "nixfmt ." instead.

tldr

In your nixbsd checkout:

# Build the VM and all dependencies, make sure Nix doesn't delete them
# Will likely take several hours
nix build .#base.vmClosureInfo --out-link .gcroots/vm
# Build the VM (actual build happened last step, should only take a few seconds)
nix build .#base.vm
# Run a VM
result/bin/run-nixbsd-base-vm
# login as root:toor or bestie:toor

or to just build and try a VM to play with without a local checkout:

nix run 'github:nixos-bsd/nixbsd#extra.vm'

but see the above warning about substituter trust before accepting the requested substituter. This will put VM state files in the current directory.