wanem is a clean web interface which remotely configure the linux traffic control driver (tc). It is a great way to simulate a wan environment for testing purposes.
- automated interfaces discovery
- display the bridge interface associated to native interfaces
- report facing devices name such as reported by LLDP
- report interfaces statistics
- limit bandwidth per interface
- adjust delay, loss and jitter per interface
- built for bridges, does not change your VLAN attribution and IP setup
First, create bridge interfaces on your appliance and connect each bridge interface to two physical interfaces. Configure a real or a dummy IP address on each bridge. Connect each WAN end to a physical interface. Install and start wanem and use the HTML interface to configure the bandwidth, the delay, the packet loss and the jitter of each interface.
apt-get update
apt-get install ruby bridge-utils lldp ruby-dev
gem install sinatra
gem install thin
git clone https://github.com/PJO2/wanem
cd wanem
ruby ./http_main.rb
ruby-dev is not a package, should be installed manually
wget https://security.debian.org/debian-security/pool/updates/main/r/ruby2.1/ruby2.1-dev_2.1.5-2+deb8u6_amd64.deb
wget https://ftp.us.debian.org/debian/pool/main/g/gmp/libgmp-dev_6.0.0+dfsg-6_amd64.deb
wget https://ftp.us.debian.org/debian/pool/main/g/gmp/libgmpxx4ldbl_6.0.0+dfsg-6_amd64.deb
dpkg -i libgmpxx4ldbl_6.0.0+dfsg-6_amd64.deb
dpkg -i libgmp-dev_6.0.0+dfsg-6_amd64.deb
dpkg -i ruby2.1-dev_2.1.5-2+deb8u6_amd64.deb
gem install sinatra:1.4.8
gem install thin
git clone https://github.com/PJO2/wanem
cd wanem
ruby ./http_main.rb
Main concern is to stop NetworkManager, which does not support bridging. Then install as follow.
# Stop networkmanager
service NetworkManager stop
systemctl disable NetworkManager.service
yum install epel-release
yum update
yum group info "Development Tools"
yum install bridge-utils lldpd ruby ruby-dev
gem install sinatra:1.4.8
gem install thin
git clone https://github.com/PJO2/wanem
cd wanem
ruby ./http_main.rb
Add a @reboot line into the crontab (Note: PATH setup is only necessary for CentOS).
crontab -e
add a line :
@reboot (export PATH='/bin:/sbin:/usr/bin:/usr/sbin' && cd home/ark/wanem && ruby http_main.rb &> /dev/null &)