This is an educational project. Although the project started as a learning exercise on the Irrlicht Engine, it has kind of turned into an OpenGL one instead due to limitations and issues with Irrlicht (most likely caused by my limited experience with graphics programming). As it turns out, working directly with OpenGL is not as hard as I thought. For more information on the project's license, check LICENSE.
This project aims to reproduce the background functionality of Wallpaper Engine on Linux systems. Simple as that.
Wallpaper Engine is a software designed by Kristjan Skutta that provides live wallpaper functionality to Windows Systems, allowing its users to animate their own backgrounds and share their own creations. You can find more about it on their Steam page.
- OpenGL 2.1 support
- CMake
- LZ4
- ZLIB
- SDL
- FFmpeg
- X11 (with libxxf86vm)
- Xrandr
- GLFW3
- GLM
- GLEW
- GLUT
- FreeImage
- MPV
- PulseAudio
sudo apt-get update
sudo apt-get install build-essential cmake libxrandr-dev libfreeimage-dev libxinerama-dev libxcursor-dev libxi-dev libgl-dev libglew-dev freeglut3-dev libsdl2-dev liblz4-dev libavcodec-dev libavformat-dev libavutil-dev libswscale-dev libxxf86vm-dev libglm-dev libglfw3-dev libmpv-dev mpv libmpv1 libpulse-dev libpulse0
In order to properly use this software you'll need to own an actual copy of the Windows version of Wallpaper Engine (which you can buy on the Steam Page), as it contains some basic assets on which most of the backgrounds are based on.
The only way to get those assets is to install the Windows version through Steam. Luckily you don't really need a Windows installation for that. Using the Linux Steam client is enough to download the files we need. Note you may need to check "Enable Steam Play for all other titles" in the Steam Play section of Steam's settings if you haven't already. Also note that the software cannot actually be launched through Steam Play (Proton), but the setting is required for Steam to download the software.
The automatic way doesn't require anything extra, as long as Wallpaper Engine is installed in Steam the software should automatically detect where the assets are.
In the off-case where the software doesn't automatically detect the correct path, the assets can be extracted manually. Once Wallpaper Engine is downloaded, open the installation folder (Right-Click the application in Steam -> Manage -> Browse local files). Here you'll see the main folders of Wallpaper Engine. The folder we're interested in is the one named "assets".
The assets folder itself must be copied to the same folder where the binary lives.
You can download a zipped version of the repository here: https://github.com/Almamu/linux-wallpaperengine/archive/refs/heads/main.zip
You can also clone the repository using git like this:
git clone [email protected]:Almamu/linux-wallpaperengine.git
Or using the HTTPS method if you haven't set up SSH:
https://github.com/Almamu/linux-wallpaperengine.git
The project is built on CMake as the build engine. First we need to create the directory where the build will be stored and get into it:
mkdir build
cd build
Once the folder is created and we're in it, CMake has to generate the actual Makefiles. This can be done this way:
cmake ..
Take a closer look at the CMake output, if you miss any library, CMake will report the missing libraries so you can install them either trough your package manager or manually in your system.
Finally we can compile the project to generate the actual executable.
make
REMEMBER: The assets folder has to be in the same folder as the executable
Just like with the assets, the software can automatically detect where the subscribed backgrounds are stored. To get started, search in the workshop for whatever background you want to use and click the "+Subscribe" button. This should download the background in the steam directory.
To actually use the background you'll need to know the workshop's ID. This can be obtained right-clicking anywhere in the background's page -> "Copy Page URL". You can paste this URL anywhere, it will look something like this:
https://steamcommunity.com/sharedfiles/filedetails/?id=1845706469&searchtext=portal+3
Where 1845706469 is the wallpaper's ID. You can use this ID to run wallpaperengine:
./linux-wallpaperengine 1845706469
For the situations where the software cannot detect where the backgrounds are stored, you can specify a full path to it, like so:
./linux-wallpaperengine /home/almamu/Development/backgrounds/1845706469/
By default the app will load the backgrounds in a window so you can preview them:
./linux-wallpaperengine /home/almamu/Development/backgrounds/1845706469/
Where /home/almamu/Development/backgrounds/1845706469/
is the background's path.
The app supports running as background in X11 and Wayland. Use the --screen-root switch and the screen name, like so:
./linux-wallpaperengine --screen-root HDMI-1 --screen-root DVI-D-1 1845706469
Has only been tested under wlroots but should work on any flavour as long as wlr-layer-shell-unstable is supported.
Only screens configured with the XRandr extension are supported. To specify the screen names (as reported from xrandr tool) just use the --screen-root
switch. You can specify multiple screens at the same time, for example:
IMPORTANT: Right now this doesn't work if there is anything drawing to the background (like a compositor, gnome, kde, nautilus, etc)
To reduce the performance hit to your system you can reduce (or increase) the FPS limit with the switch --fps
, especially useful for laptops:
./linux-wallpaperengine --fps 30
It's possible to disable the audio of the background with the silent argument
./linux-wallpaperengine --silent
It is possible to take a screenshot of the screen's content at the moment a background is loaded up and rendered. Useful for tools like pywal to further customize your environment:
./linux-wallpaperengine --screenshot /path/to/screenshot/name.png
PNG, BMP and JPEG are supported.
Some backgrounds have a list of properties that the user can customize. These properties modify how parts of the background behave or look like. Support for these is present. First, list all the available properties in a background, you can do that with the --list-properties switch:
./linux-wallpaperengine --list-properties 2370927443
The output includes all the relevant information for each of the different properties:
barcount - slider
Description: Bar Count
Value: 64
Minimum value: 16
Maximum value: 64
Step: 1
bloom - boolean
Description: Bloom
Value: 0
frequency - combolist
Description: Frequency
Value: 2
Posible values:
16 -> 1
32 -> 2
64 -> 3
owl - boolean
Description: Owl
Value: 0
rain - boolean
Description: Rain
Value: 1
schemecolor - color
Description: ui_browse_properties_scheme_color
R: 0.14902 G: 0.23137 B: 0.4 A: 1
visualizer - boolean
Description: <hr>Add Visualizer<hr>
Value: 1
visualizercolor - color
Description: Bar Color
R: 0.12549 G: 0.215686 B: 0.352941 A: 1
visualizeropacity - slider
Description: Bar Opacity
Value: 1
Minimum value: 0
Maximum value: 1
Step: 0.1
visualizerwidth - slider
Description: Bar Spacing
Value: 0.25
Minimum value: 0
Maximum value: 0.5
Step: 0.01
Any of these values can be modified with the --set-property switch. Say you want to enable the bloom in this background, you would do so like this:
./linux-wallpaperengine --set-property bloom=1 2370927443
If you keep --list-properties in the commandline you can see how the values change to confirm that it applied properly.
This was the first background to even be compatible with the software. And it's not 100% compatible yet. Both textures and shaders are properly loaded, but there are still particles missing.
In similar fashion to the example background, this one represents the progress of the program. It leverages FBOs (targets), and multiple-effects over objects.