Another thing that could knock your gun out of commission is not doing pre-load gun inspections to make sure the
spring pin is installed in the extractor body.
The Series 880 coiled
spring pin is designed specifically for circuit board card locks and ejector clips.
CPSC and LaJobi received 33 reports of the drop side detachment due to
spring pin failure.
It sold Bissel, its
spring pin manufacturing operation in Halesowen in January while it was currently considering offers for its Copel Castings factory in Handsworth.
Each overlaps the adjacent door by 2 inches, pivoting on
spring pin pivot hinges set into the curved plywood base and header.
The contactor is a stamped
spring pin with 31 gram actuation force per ball and cycle life of 125,000 insertions.
Once the hammer has been removed from the frame, you can now remove the rebound lever spring (32) by drifting the rebound lever
spring pin (33) out of the frame from left to right.
Simultaneously it can insert the standard 20mm Lockdowel Eclips fastener, as well as the new 5mm Eclips fastener and 5mm
spring pin. See this first-hand and in action at VTM booth 7426 at the AWFS Las Vegas Fair July 19-22.
Remove the
spring pin or cotter pin, whichever is installed in the bolt holding the ring on the recovery lug.
Be sure to position it so the
spring pin does not enter the barrel channel.
From the inside of the receiver, insert a 3/32 diameter or slightly smaller pin punch and gently tap the
spring pin out.