AVK GAS SUPPLY

WE GUARANTEE SAFETY
STANDARDS ARE MET
SO CAN YOU
LET’S TAKE
SAFETY TO THE
HIGHEST LEVEL
Leaks can be fatal. However, our strict quality control processes ensure reliable products
that not only meet, but also exceed, the highest safety standards. All AVK valves are
manufactured in our own state-of-the-art factories and thorough tests are carried out to
safeguard the traceability, durability and operational reliability of our products.

For more than 40 years, AVK has successfully met the safety demands of natural gas
companies. We have built a complete range of valves and accessories, and hold quality
approvals of our gas valves from the leading national and international testing institutes.

Our quality assurance system is certified according to ISO 9001, and in 2018,
we also obtained the ISO 29001 certification, an industry-specific standard for the oil
and gas industry. Moreover, we are certified to ISO 14001, the international standard for
environmental management, and to ISO 45001, the international occupational health and
safety standard.

More than 4,800 people in the AVK group are doing their utmost to ensure that AVK
remains one of the world’s leading valve manufacturers for gas, water, wastewater, and fire
protection applications.

2 | Wastewater treatment
Wastewater treatment | 3
THE UNIQUE WEDGE
IS THE HEART OF OUR
GATE VALVES
1 Unique features and benefits: Fixed wedge nut and integrated wedge
• Fixed, integral wedge nut prevents corrosion shoes
(1). AVK’s wedge nut design with a fixed, integral
• Double bonding vulcanisation process wedge nut outperforms the traditional loose
ensures maximum adhesion of the rubber. wedge nut design as it prevents vibration and
• Guide rails with integrated wedge shoes thus also corrosion and malfunction.
ensure low friction and smooth operation (2).
2
• Rubber vulcanised to the core with min. 1.5 The fixed wedge nut, combined with the guide
mm on all pressure bearing surfaces and 4 rails with integrated wedge shoes, secure a
mm on all sealing surfaces gives optimum smooth operation of the valve and low operating
corrosion protection. torques. The wedge shoes protect the rubber
• Large rubber volume in the sealing area against wear which otherwise would arise
provides optimum sealing (3). caused by the friction during operation.
• AVK’s own rubber compound features an
outstanding compression set ensuring tight
3 sealing even after having been compressed
numerous times.

4 | Gas supply
State-of-the-art rubber technology Efficient bonding is the key to durability Excellent ability to regain original shape
AVK GUMMI A/S develops and manufactures The wedge core is immersed in two different AVK GUMMI A/S has a profound knowledge of
the rubber compound for wedges and gaskets baths to provide ultimate bonding between core a rubber’s compression set, meaning its ability
using highly advanced technologies. and rubber. Even if a sharp object penetrates to regain original shape.
the rubber during closing of the valve, the
Data is collected throughout the entire bonding is so strong that there is no risk of Even after many years of service where the
manufacturing process which secures creeping corrosion. As a result, we can offer wedge rubber has been compressed numerous
traceability of every single ingredient, the best possible rubber adhesion and corrosion times, the rubber will regain its original shape
compound and final component. AVK protection of the wedge. and ensure a tight sealing. Impurities will not
performs a number of tests to ensure that affect the rubber surface or the tightness of the
the compression set values, the adhesion valve, as the impurities will be absorbed in the
and the tensile strength meet the predefined rubber when the valve is in closed position.
requirements. Our NBR compound is approved
according to EN 682.

Gas supply | 5
HIGH STRENGTH STEM
PROVIDING LOW
OPERATING TORQUES
Polished stems with rolled threads Wedge stop for extra safety
The stem threads (1) are rolled in a cold The stainless steel stems are designed with a
pressing process which maintains the steel wedge stop (3) providing a firm stop against
structure and therefore increases the strength the wedge nut when opening the valve. This
2 of the stem. This method also ensures a prevents the wedge from compressing the stem
smooth thread surface that gives low operating seals and from damaging the coating inside the
torques and prolonged durability. Finally, we bonnet resulting in prolonged durability of the
polish the stems to provide a completely even valve.
interface (2) between the stem and the stem
nut without risk of leakages.

6 | Gas supply
Gas supply | 7
CORROSION PROTECTION
IN COMPLIANCE WITH
GSK REQUIREMENTS
Internal and external epoxy coating Thorough control measures are applied
All castings are blast cleaned according to to ensure optimum corrosion protection in
ISO 12944-4. Any unevenness of the product accordance with DIN 3476 part 1, EN 14901
surface is cleaned to provide perfect adhesion and GSK requirements.
of the coating.

The epoxy is applied in a closed booth, either

manually or in our automatic fluidised bed
system, where the powder melts and cures in
contact with the preheated component.

8 | Gas supply
Thorough tests of the epoxy coating Galvanic corrosion prevention
We check each batch of epoxy coated For more than 30 years, we have offered a
components to ensure a layer thickness of highly resistant polyurethane (PUR) coating as
minimum 250 μm and a pore-free surface. an option for our gas valves.

The coating must be completely free of Polyurethane gives outstanding protection of the
penetrating pores to avoid subsequent corrosion valve against galvanic corrosion, shielding the
of the casting underneath. A 3000 V holiday valve completely from its surroundings, and in
detector with a brush electrode is used to addition, polyurethane eliminates any risk that
electrically reveal and locate any pores in the electrical currents will penetrate the valve. PUR
coating. The PUR coating can also give an coating can also give additional protection of a
additional protection of a valve when installed in valve installed in aggressive soils.
aggressive soils. The photo above shows a fully functional PUR coated
The polyurethane coating is quality tested AVK valve produced in 1989 that has been excavated
The impact resistance test is carried out by according to EN10290 type 2, class B. This after 21 years of operation. The valve had to be
means of a stainless steel cylinder dropped means that the dried coating layer will always opened by an angle grinder due to the robustness of
the coating, and the valve was still in perfect condition.
on the coating surface through a one meter have a minimum thickness of 1500µ (1.5 mm).
long tube corresponding to an impact energy After curing, the PUR coating of every single
of 5 Nm. After each impact the component valve is checked for holidays at 20 kV
is electrically tested, and no electrical break- (20,000 volts). The coating is only approved if
through shall occur. no pinholes are detected.

The curing of the epoxy coating is checked in

a cross linkage (MIBK) test, where one drop of
methyl isobutyl ketone is put on a horizontal
epoxy coated surface of a test piece. After 30
seconds the test area is wiped with a clean
white cloth. It is checked that the test surface
has not become neither matt nor smeared, and
that the cloth remains clean.

Gas supply | 9
 NO COMPROMISE
ON TIGHTNESS
AND TRACEABILITY
Triple safety in the stem sealing system 100% pressure test and traceability
1 An NBR wiper ring (1) protects against Every single valve is pressure tested to
2 impurities from the outside. Tightness and low DIN 3230-5, PG 3 / EN 13774 before leaving
friction are provided by four NBR O-rings in a the factory.
stem seal nut (2), which is replaceable under
3
pressure. An NBR manchette (3) is the main In open position:
seal to the flow and prevents leakage in the 1.5 x with water
5 rare case that the stem seal nut needs to be 0.5 bar with air
4 replaced. 1.1 x with air

Tight assembly of valve body and bonnet In closed position:

An NBR bonnet gasket (4) fits into a recess 0.5 bar and 1.1 x with air, from both sides
between the valve body and the bonnet. The
stainless steel bonnet bolts (5) are encircled by When the valve has successfully passed the
the bonnet gasket, countersunk in the bonnet pressure test, the serial number is stamped on
and finally sealed with hot melt to prevent the valve stem and noted in the pressure test
corrosion. report for documentation.

Full bore prevents pressure loss

A full bore with the same nominal diameter as
the pipeline ensures minimum pressure loss, as
the valve does not cause any reduction in the
flow path.

10 | Gas supply
Gas supply | 11
PE END CONNECTION
STRONGER THAN THE PIPE
ITSELF
No mechanical joints Renowned AVK design
The advantage of a fully welded pipe system is The DVGW approved connection is stronger
that it has no mechanical joints. Therefore, no than the PE pipe itself. A piece of standard
bolts can come loose and cause couplings or PE pipe is pressed directly onto the grooved
flanges to leak. The PE welding joints are even valve end. The grooves combined with a sleeve
stronger than the PE pipe itself, and the same around the valve/pipe connection ensure that
goes for the joints connecting the valve and its the PE pipe material is firmly secured and
PE pipe ends. Therefore, AVK gate valves with that the connection remains tight and tensile
PE ends are the obvious choice as part of a the entire service life of the pipeline. The
fully welded PE pipeline. connection is sealed with a shrink hose to
provide corrosion protection.

12 | Gas supply
GATE VALVES WITH
PE ENDS - A NATURAL
PART OF PE NETWORKS
Get all the benefits Foundation provides stability
With a fully welded PE pipe system including Valves in DN50-100 can be equipped with a
valves, you get all the installation benefits of foundation that secures the stability of the valve
PE pipes. PE pipes are flexible and follow the and prevents opening or closing torques from
terrain, so there is no need to level the soil in being transferred to the PE pipe. The foundation
the trench. PE pipes are easy to handle and is made of hot-galvanised steel and includes
are typically welded above ground for easy two plastic straps for fixation of the valve.
installation. One of the strengths of AVK gate
valves with PE ends is that the same welding
parameters can be used throughout the entire
network, since standard PE pipes are mounted
on the valves. Thanks to the extra-long PE ends
of the valves, there is even room for an extra
weld, if needed.

Direct welding into PE pipes

AVK gate valves with PE ends enable direct
welding into PE pipes by using socket fusion
or butt welding. The full, straight bore ensures
minimum pressure loss and makes under
pressure drilling possible.

The valves are available with PE X PE

connection in DN80-400, with flange X PE
connection in DN50 X200 and with steel spigot
end X PE connection in DN 50-300.

Gas supply | 13
GATE VALVES FOR
WELDING INTO LOW
PRESSURE STEEL PIPES
Complete range up to DN600
AVK gate valves with steel spigot ends are
available in DN50 to 600. We offer two
different face-to-face dimensions both offering
easy access to the welding ends, and optionally
with ISO top flange prepared for mounting of
electric actuator. The low weight facilitates easy
handling of the valves on site. The valves are
made of cast steel GP240GH with welding ends
according to DIN 3239 part 1. The welding
process is performed by certified welders.

All welds undergo non-destructive X-ray testing,

which means that the valves comply in full with
the requirements of PED (Pressure Equipment
Directive) 2014/68/EU.

All tests are carried out by a certified inspection

company. The examination procedure is
according to EN ISO 17636-1, and the
acceptance criteria according to EN ISO
10675-1.
Gate valve with up- and downstream purge points

14 | Gas supply
FLANGED AND SERVICE
CONNECTION VALVES
COMPLETE THE RANGE
Service connection valves Flanged gate valves
AVK service connection valves feature the Flanged gate valves can be used for almost
same basic construction as the main-line gate any application. AVK flanged gate valves
valves except for the wedge design. The wedge are available in two different face-to-face
core is made of dezincification resistant brass dimensions and with standard bonnet, ISO
which is vulcanised with NBR rubber externally. flange bonnet or with position indicator:
The wedge is shaped with wedge guides, and
a patented rubber profile ensures low closing • Long, according to EN 558 table 2 basic
torques. series 15 (DIN F5), DN40-500
• Long, with position indicator, DN400-500
AVK service connection valves are available • Short, according to EN 558 table 2 basic
with internal thread and with PE ends for series 14 (DIN F4), DN40-600
welding into PE pipes. • Short, prepared for actuator with ISO top
flange, DN50-400
• Short, with position indicator, DN50-400

Gas supply | 15
PE BALL VALVES FOR LOW
PRESSURE APPLICATIONS

Valve range Approvals and type testing Full bore

AVK CERTUS PE ball valves are available CERTUS valves are fully type tested at an Body and spigots are made of high
from OD20 up to OD180 mm. Depending on external worldwide reputable laboratory. The performance PE100, and the valves can be
the requested pressure rating the valves are valves meet all requirements in EN1555-4, welded to all PE100 and PE80 pipes. A full bore
available with SDR11 or SDR17.6 spigot ends. ISO4437-4, GIS/V7-2 and EN12201-4. ensures a low pressure drop and greater flow
through the valve at the same pressure. The
Full traceability During type testing, the valves are not only large bore also allows for pigging of pipes.
AVK PE ball valves are produced with state-of- submitted to various long and short term
the-art machinery to guarantee a consistent leaktightness checks, but also to rigorous
high quality. We are able to trace components pulling, bending and thermal cycling tests.
throughout the manufacturing process from The operating mechanism and top cap
initial injection moulding over machining and can withstand high torques at extreme
welding to final batch release test. Every valve temperatures.
is given a unique serial number which can be
traced back to the raw polyethylene material.

16 | Gas supply
(1) If the valve is over torqued, the top cap is designed to fail before the valve
seals fail, thus preventing leaks. The safety top cap can be replaced easily under (2) Triple O-ring construction around the stem guaranteeing sealing safety
live conditions.

(4) The seat retainer design ensures the ball seat is kept in place. It prevents the
(3) The intentionally over-designed stem is extremely strong and of the anti
ball seat from being dislodged, which guarantees a good functionality throughout
blow-out type.
the years.

Safety top cap prevents leaks Sealing at all times

If the valve is over torqued during opening or The seat retainer design (4) ensures that the
closing, the top cap is, as a safety feature, ball seat is kept in place. The floating ball
designed to fail before the valve seals fail in principle and special shaped ball seats are
order to prevent leakage. The safety top cap is designed to ensure sealing at all times and be
replaceable under live conditions. less affected by dirt or debris.

Optimised stem sealing Spigot end construction

The ball valves are equipped with two weather The spigots are butt welded to the body.
seals (1) avoiding ingress of ground water and Visual beads ensure a high joint quality of
dirt into the operating mechanism. The stem each weld in the complete pipeline. The spigot
1 (3) is of the anti blow-out type and has a triple ends are machined on the inside as well as
2 O-ring seal (2) to guarantee safety at all times. on the outside, guaranteeing a uniform wall
thickness and allowing for optimal welding
of electro fusion couplers. The smooth inner
surface prevents deposits and minimises flow
3 resistance.

Gas supply | 17
BUTTERFLY VALVES
FOR ABOVE GROUND
INSTALLATIONS
Renowned centric butterfly design The disc has a profiled sealing edge which
The butterfly valves are produced by Wouter requires minimal deformation of the liner to
Witzel EuroValve, a well-esteemed company achieve a tight sealing. This gives less wear of
in the AVK Group, and one of very few the liner and low operating torques. Therefore,
manufacturers of butterfly valves with fixed the butterfly valves are the ultimate choice for
liner. The Wouter Witzel butterfly valves are applications with high operation frequency.
approved by all major authorities such as KIWA,
DVGW, SVGW, and WRC.

Cost efficient installation

The compact lightweight construction saves
space and makes the valves easy to handle.
The streamlined disc shape ensures minimum
turbulence and head loss. Furthermore, the low
torques facilitate the operation of the valves
allowing the use of smaller and less expensive
actuators.

Outstanding seating concept

The rubber is injection moulded directly on the
valve body forming a permanent bond with an
optimal rubber shore hardness. Consequently,
there is no risk of deformation or dislocation
of the liner making the valves suitable under
vacuum conditions.

18 | Gas supply
REPAIR CLAMPS
FOR QUICK REPAIR
OF LEAKAGES
Cost-effective repair Complete range of stainless steel clamps
Our stainless steel repair clamps are used The range includes a single band clamp with
worldwide for repair of leakages and ruptures diameters ranging from 48-52 mm to 350-360
in pipe systems. The design ensures a cost- mm, a double band clamp ranging from 88-110
effective and reliable solution for quick repairs mm to 590-610 mm, and a triple band clamp
of steel, copper, asbestos cement, cast iron ranging from 270-300 mm to 810-840 mm.
and plastic pipes. Repair clamps may be used Other dimensions are available upon request.
for permanent repair of punctures as well as
longitudinal and circumferential cracks. The clamps are available with or without
BSP thread, in lengths of 100-900 mm with
The functional principle of the repair clamp intervals of 100 mm, and in stainless steel AISI
is based on a stainless steel, pre-rolled plate 304 or AISI 316. They are designed with NBR
which is clamped around the pipe and fastened rubber lining, teflon coated A2 bolts, and teflon
with lugs and nuts. After welding, the clamp coated A4 nuts. Clamps for DN600 to 2000
will be completely pickled and passivated in pipes are also part of the range.
order to ensure corrosion resistance. AVK repair
clamps are provided with a waffle structured
rubber gasket and rounded tops to create a fully
circumferential seal.

Gas supply | 19
EXTENSION SPINDLES
IN A DURABLE AND
USER-FRIENDLY DESIGN
Complete range Telescopic design facilitates on-site
Extension spindles are used for easy access adjustments
to operation of valves installed below ground. The top adaptor is designed with a defrosting
AVK extension spindles are produced on hole and with ears that can be fixed into AVK
fully automated state-of-the-art production surface boxes and support tiles. A lock spring
equipment to ensure cost efficiency and a prevents the telescopic part from collapsing
uniform quality. during installation, as it creates friction inside
the inner tube.
The extension spindles are available in
telescopic and fixed length designs for gate The blue center sleeve protects against
valves as well as for service connection valves. penetration of impurities between the two outer
Furthermore, they are available in telescopic PE pipes.
design for PE ball valves.
Telescopic extension spindles with
The extension spindles are made of corrosion- break zone
resistant materials to ensure long service life. We also offer variants with break zone in the
The conical key adaptor fits standard T-keys. key adaptor which prevents damage of the valve
The bottom cover protects the valve spindle in cases where too much torque is applied. In
from impurities and enables it to rotate freely. such cases the break nut is easily replaced, and
the extension spindle can still be operated by
Fixed length design features easy means of a #20 socket wrench. Spare part sets
shortening are available.
The patented AVK design facilitates fast and
easy shortening of the extension spindle. The
complete adjustment of the length can be done
merely by use of a hacksaw. The extension
spindles are available with a pipe cover of 800-
1000-1500-2000-3000 mm.

Expanding bolt design facilitates easy height

adjustment on fixed length extension spindles. The top spanner and the inner tube are press fit. The breakzone prevents damage of the valve.

20 | Gas supply
“Safe-click” for service connections
Both the fixed and the telescopic extension
spindles feature a patented “Safe-click”
mounting system. “Safe-click” offers a secure
and fast three-step mounting process on service
connection valves.

The spindle adaptor of the extension spindle is

placed on top of the valve stem. The split fitted
on the bottom cover is inserted in the hole of the
spindle adaptor and valve stem, and the bottom
cover is pressed down until “click”.

“Safe Click”
design

Gas supply | 21
SURFACE BOXES
LIGHTWEIGHT AND
SUSTAINABLE
Why choose synthetic surface boxes? Height adjustable surface boxes
• Lightweight, ensuring safe and easy handling AVK offers a wide range of DIN DVGW approved
in compliance with Health and Safety height adjustable surface boxes specifically
Regulations designed for tarmac installation. The use of
• Maintenance and corrosion free. Easy access height adjustable surface boxes enables easy
throughout the year; no need to clean or and precise installation thanks to flexible
grease the seat to protect against corrosion positioning of the top part. Height adjustable
or frost surface boxes prevent costly correction after
• Silent in traffic zones; synthetic material installation and save time and money when
absorbs noises roads are renovated.
• 100% recyclable and significantly less use of
energy resources compared to the production AVK also offers height adjustable surface boxes
of cast iron surface boxes with reinforced rim, ensuring better support
• Heat resistant max. 250ºC of the top part and making this product even
more robust, stable and suitable for heavy duty
Designed for tough conditions application areas.
The housing of synthetic surface boxes is made
from specially compounded PA+ (polyamide Fixed height surface boxes
with additives), making the surface box suitable Our Classic fixed height surface boxes are
for heavy duty application areas in all seasons DIN DVGW approved and designed to withstand
and conditions. heavy traffic loads. Therefore, they are often
used in medium and heavy duty application
The material has high impact resistance at low areas.
temperatures and is sufficiently heat resistant
for safe installation in tarmac roads. The ribs in Our Futura range is a lightweight and price
the housing ensure optimal fixation in the road competitive version and is often used in light
foundation. to medium duty application areas.

22 | Gas supply
Recognisable synthetic lids Support tiles and top frames Flexible floating surface boxes
Lids made of synthetic material are corrosion Support tiles significantly increase the support The deflection ability secures optimal fit
free, unattractive to thieves, more aesthetic required by surface boxes in weak soils. They on sloped surfaces. The internal fixation of
(making them highly suitable for shopping also prevent telescopic extension spindles from telescopic extension spindles enables height
areas and city centres) and lightweight, and in being pushed back. adjustment after installation. The large chamber
compliance with Health and Safety Regulations. provides easy access for mounting and
Top frames protect surface boxes in green demounting of the extension spindle, and the
To prevent the lid from being lifted by the zones and improve the visibility of the surface closed design protects the extension spindle
suction of a passing vehicle, the reduced box. Synthetic top frames are lightweight, against impurities.
weight is compensated for with a locking clip especially compared to concrete top frames.
around the bolt. In the event that surface box With a top frame, grass will not overgrow the The surface boxes are available with square or
lids get covered with snow, leafs or soil, AVK surface box and combined with a support circular surface plates. The body is made of
offers a solution that makes the surface box tile, easy access to valves installed below is polyamide PA-6, and the surface plate and lid
easily detectable by means of a ferromagnetic guaranteed. are of ductile iron with black primer. The lids
detector. are also available with yellow epoxy coating.

Gas supply | 23
SUPA MAXI™
UNIVERSAL TENSILE
COUPLINGS
Innovative design with unique features Cut time on installation
AVK offers a complete range of universal Supa Maxi™ couplings enable ±4° (in total
tensile couplings comprising straight, step and 8°) deflection on each side up to a maximum
transition couplings as well as flange adaptors pressure of PN10.
and end caps complying to the EN 14525
standard. Supa Maxi™ sets a new standard All items with a weight exceeding 10 kilos
with its unique features: are designed with a lifting eye in the sleeve
enabling easy and ergonomically safe handling.
• Fully universal and tensile
• Patented SupaGrip™ sealing support system Due to the all-metal SupaGrip™ sealing
• PN10 in all dimensions support system, re-tightening of the bolts is not
• ±4° (8°) angular deflection on each side necessary.
• Permanent protection caps provide protection
during handling and installation During handling, the center piece of the
• Bolts are tightened on the bolt head from the protection cap protects against the sharp grip
sleeve side, no re-tightening segments and prevents impurities from settling
• Lifting eye in DN100-400 inside the coupling.
• Fusion bonded epoxy coating in compliance
with DIN 3476 part 1 and EN 14901, GSK
approved
• Gasket of NBR approved for gas
• Temperature range -20°C to +70°C

24 | Gas supply
 Before tightening After tightening

The large insertion depth tolerances allow the Superiour tightness on all pipe materials
pipe to be cut slightly angled and the pipe will SupaGrip™ provides full support and backup
not move inwards when tightening the bolts. of the gasket even on minimum pipe sizes
This gives a simple installation without need for within the tolerance range and when used on
precise adjustment. oval pipes. The flexible bracket is designed to
contract and follow the external pipe diameter.
As a result, it serves as a solid backup for the
gasket and enables full deflection.

When tightening the bolts, the bracket

segments and radially moving bolts move
inwards, securing that the gasket tightens
around the pipe and that the grip segments
clutch the pipe surface.

Large insertion depth tolerance Supa Maxi™ Typical coupling

Gas supply | 25
GATE VALVES

Series 36/90 Series 36/90 Series 38/90

Gate valve with PE ends Gate valve with PE ends Gate valve with flange/
DN65-400 DN65-400 PE end
PE100/PN10 SDR 11 PE100/PN10 SDR 11 DN50-200
pipes pipes PE100 / PN10 SDR 11
pipe

Ductile iron Ductile iron

With external epoxy With external PUR
coating coating Ductile iron
With external epoxy
Options: Options: coating
• PE100/PN10/4 pipes • ISO top flange

Series 46/64 Series 46/70 Series 46/80

Gate valve with short Gate valve with long Gate valve with long
spigot ends spigot ends spigot ends and two
DN50-300 DN50-600 purge points
PN16 PN16 DN80-600
GP240GH GP240GH PN16
With external epoxy With external PUR GP240GH
coating coating With external PUR
coating
Option: Option:
• external PUR coating • external epoxy coating

Series 46/78 Series 46/90 Series 02/70

Gate valve with long Gate valve with steel/PE Flanged gate valve
spigot ends and ISO top spigot ends Long DIN F5
flange DN50-300 DN40-500
DN50-400 PN10 PN10/16
PN16 GP240GH Ductile iron
GP240GH With external epoxy
With external PUR coating
coating

Option: External epoxy coating

• external epoxy coating
Options:
• external PUR coating

Series 06/70 Series 06/59 Series 15/78

Flanged gate valve Flanged gate valve Flanged gate valve
Short DIN F4 with position indicator with ISO top flange
DN40-600 Short DIN F4 Short DIN F4
PN10/16 DN50-400 DN50-400
Ductile iron PN10/16 PN10/16
With external epoxy Ductile iron Ductile iron
coating With external epoxy With external PUR
coating coating

Option: Option:
• long DIN F5, DN400- • external epoxy coating
500

26 | Gas supply
SERVICE CONNECTION VALVES, COUPLINGS,
BUTTERFLY VALVES AND BALL VALVES

Series 36/9X Series 03/25 Series 631/70

Service connection valve Service connection valve Supa Maxi™ universal
with PE ends with internal thread tensile straight coupling
DN25-50 DN25-50 DN50-400
PE100 / PN10 or 4 pipes PN4 PN10
Ductile iron Ductile iron
With external epoxy
coating Options:
Ductile iron • step coupling
With external epoxy
coating

Options:
• external PUR coating

Series 633/70 Series 634/70 Series 75/11

Supa Maxi™ universal Supa Maxi™ universal Wafer butterfly valve,
tensile flange adaptor tensile end cap centric with fixed liner
DN40-400 DN50-300 DN50-600
PN10 PN10 PN10/16
Ductile iron Ductile iron Ductile iron

Series 75/31 Series 75/20 Series 85/30

Semi-lug butterfly valve, Double flanged short Ball valve with spigot ends
centric with fixed liner butterfly valve, centric DN25/Ø20 mm -
DN50-300 with fixed liner DN150/Ø180 mm
PN10/16 DN50-600 PN10
Ductile iron PN10/16 PE100
Ductile iron
Options: Options:
• full lug Options: • lever
• double flanged long • support base

Gas supply | 27
SURFACE BOXES AND SUPPORT TILES

Series 80/31 Series 80/32 Series 80/33-000

Surface box ”Futura” for Surface box ”Futura” for Surface box for service
gate valves service connection valves connection valves, design
Fixed height Fixed height derived from DIN 4059
Body of PA+ Body of PA+ Fixed height
Lid of yellow PA Lid of of yellow PA Body of PA+
Lid of cast iron
Options: Options:
• lid of cast iron or black • lid of cast iron or black
PA for pavement PA for pavement

Series 80/33-100 Series 80/33-400 Series 80/34-000

Surface box for service Surface box for service Surface box for gate
connection valves, design connection valves valves to DIN 3581
derived from DIN 4059 Height adjustable Fixed height
Height adjustable Reinforced rim Body of PA+
Body of PA+ Body of PA+ Lid of cast iron
Lid of cast iron Lid of cast iron

Series 80/34-100 Series 80/34-400 Series 80/35

Surface box for gate Surface box for gate Surface box for gate
valves to DIN 3581 valves, design derived valves to DIN 3582
Height adjustable from DIN 3581 Height adjustable Body
Body of PA+ Height adjustable of PA+
Lid of cast iron Reinforced rim Lid of cast iron
Body of PA+
Lid of cast iron Options:
• fixed height

Series 80/36 Series 80/46 Series 80

Surface box for gate Support tile for surface Top frame for
valves to DIN 3583 boxes for gate valves and surface boxes
Fixed height service connection valves for gate valves
Body of PA+ With spindle fixation and service
Lid of cast iron PA+ connection
valves
Options: Options: PA+
• height adjustable • without spindle fixation
• synthetic lid
• to DIN 3584

28 | Gas supply
EXTENSION SPINDLES, REPAIR CLAMPS
AND GASKETS

Series 04/05 Series 04/07 Series 04/02

Extension spindle for Extension spindle for Extension spindle for gate
service connection valves service connection valves valves
Fixed length Telescopic Fixed length
DN25-50 DN25-50 DN40-400
Pipe cover 800-3000 mm Length 450-700 to 1700- Pipe cover 800-3000 mm
2900 mm

Series 04/04 Series 04/F Series 748/01

Extension spindle for Extension spindle for Repair clamp
gate valves PE ball valves Single band with support
Telescopic Telescopic plate
DN50-600 DN25-150 Stainless steel AISI 304
Length 450-700 to Length 450-700 to or AISI 316
2850-5250 mm 2850-5250 mm NBR rubber

Options:
• fingers
• handgrip

Series 748/02 Series 748/03 Series 79/B

Repair clamp Repair clamp Flange gasket in straight
Single band with support Triple band with support KGS design
plate plate NBR rubber
Stainless steel AISI 304 Stainless steel AISI 304 DN50-800
or AISI 316 or AISI 316
NBR ubber NBR or EPDM rubber Options:
• Drop-shaped KGS-S
Options: Options: design
• fingers • fingers
• handgrip

Gas supply | 29
EXPECT US TO EXCEED
MARKET STANDARDS

Inhouse R&D In our business there are five cornerstones that

In our Development Department in Denmark, must be in place in order to meet customer
ideas and suggestions for new products are expectations: Quality, reliability, innovation,
gathered, and existing products are updated sustainability and customer service.
continuously.
But we need to go further than that. We go
We use FEA (Finite Element Analysis) to further to exceed our customers’ needs and
optimise the strength and geometry of our expectations.
components and CFD (Computational Fluid
Dynamics) analyses to validate different product “Expect... AVK” means that our customers
designs prior to creating physical prototypes, should rightfully expect us to exceed market
enabling us to predict consequences in cases standards. “Expect... AVK” means that we
where it is impossible to create full scale tests relentlessly strive for increased customer
on physical products. benefits!

We make our own test and production To ensure that we keep pushing the boundaries
equipment, and in our flow lab, we conduct of what the market can expect, we have
thorough prototype and life cycle tests prior to formulated promises that we will strive to deliver
release for production. New product types are in all our markets:
generally field tested in co-operation with end
users before final launch. EXPECT A LONG-TERM PARTNERSHIP
EXPECT QUALITY IN EVERY STEP
Certified according to ISO/TS 29001:2010 EXPECT LASTING INNOVATIONS
ISO 29001 is an industry-specific standard for EXPECT TOTAL SAVINGS
the oil and gas industry based on ISO 9001, but EXPECT SOLUTIONS, NOT JUST PRODUCTS
with stricter requirements for control measures EXPECT GLOBAL LEADERSHIP AND LOCAL
and risk management, in that key issues such COMMITMENT
as staff training, traceability of materials and EXPECT PROMPT RESPONSE
obtained test results must be documented. EXPECT IT TO BE EFFECTIVE AND EASY

Moreover, we are certified to ISO 14001, See more on www.avkvalves.eu

the international standard for environmental
management, and to ISO 45001, the
international occupational health and safety
standard.
Expect... AVK

30 | Gas supply
Gas supply | 31
AVK International A/S
Bizonvej 1 Tel.: +45 8754 2100
Skovby www.avkvalves.eu
8464 Galten
Denmark
2022-11-17
© 2022 AVK Group A/S - rev. 1