Coded Non-Contact

Stainless Steel Safety Switches

With Universal 22 mm (0.87") Fittings

SMC Series

SMC-139006 switch,
shown actual size.

U 316 Stainless Steel Housing Mirror

Polished (Ra4) The SMC Series coded non-contact safety switches
U Coded Magnetic Actuation have been designed to enable the conformance to
U Wide Sensing at 14 mm (0.55") with EN60947-5-3 and be used as directed by ISO12100,
ISO14121 and EN60204-1. They have coded magnetic
High Tolerance to Misalignment sensing which provides a wide sensing distance
U Will Operate with Most Safety Relays and provides a high tolerance to misalignment after
sensing. They can be fitted behind stainless steel
U LED Indication fittings and can operate from 4 directions even in
U Universal Fitting–Established 22 mm extreme environments of temperature and moisture.
(0.87") Footprint Suitable for Most When used in combination with most dual channel
Applications safety monitoring relays they can be used to provide
up to PLe to ISO13849-1.
U Specifically Designed for Food SMC Series coded non-contact safety switches are
Processing and Pharmaceutical designed to interlock hinged, sliding or removable
Applications guard doors. SMC Series switches have been
U Suitable for CIP and SIP Cleaning–Food developed for non-contact guard door interlocking in
the food processing and pharmaceutical industries.
Splash Zones EHEDG Guidelines
They are specifically advantageous when:
U Can Be High Pressure Hosed with • Poor guard alignment exists
Detergent at High Temperature– • Anti tamper sensing is required
NEMA PW12 (IP69K) Rating • High hygiene requirements exist, e.g. food industry
U Up to: PLe ISO13849-1 hose down
U 2 NC 1 NO Circuits–High Switching Life– • Long life is required (no moving or touching parts)
No Moving Parts • LED status indication is desirable
1
 Recommended Setting Gap: 5 mm (0.2")
Switching Distance: Sao 10 mm (0.4") close
(Target to Target): Sar 20 mm (0.8") open
Tolerance to Misalignment: 5 mm (0.2") in any direction
from 5 mm (0.2") setting gap
Specifications Switching Frequency: 1.0 Hz maximum
Standards: ISO14119, EN60947-5-1, EN60204-1, Approach Speed: 200 mm/min to 1000 mm/sec
ISO13849-1, EN62061, UL508 Body Material: 316SS mirror polished to Ra4
Safety Classification and Reliability Data: Operating Temperature (CIP SIP Cleaning): -25 to 105°C
ISO13849-1: Up to PLe Category 4 (-221 to 176°F)
EN62061: Up to SIL3 Enclosure Protection: NEMA PW12 (IP69K), NEMA 6 (IP67)
PFHd: 8.71 x 10-11 Shock Resistance: IEC68-2-27; 11 ms, 30 g
Proof Test Interval (Life): 20 years Vibration Resistance: IEC68-2-6; 10 to 55 Hz, 1 mm
MTTFd: 866 years Cable Type: PVC 6 or 8 core, 6 mm (0.24") OD; conductors,
0.25 mm2
Safety Channel 1: NC 24 Vdc, 0.2 A max rating
Mounting Bolts: 2 x M4; tightening torque, 1.0 Nm
Safety Channel 2: NC 24 Vdc, 0.2 A max rating
Mounting Position: Any
Safety Channel 3: NO 24 Vdc, 0.2 A max rating
Dimensions: See diagram below
Minimum Switched Current: 10 Vdc, 1 mA
Weight (of Switch, Actuator and Cable):
Dielectric: Withstand 250 Vac 370 g (0.82 lb) with 5 m (16.4') cable;
Insulation Resistance: 100 MΩ 620 g (1.37 lb) with 10 m (32.8') cable

Dimensions: mm (inch)
50 (1.97) 13 (0.51)

4.5 (0.18)
20.5 (0.81)
25.5 (1.0)

SWITCH
4.2 (0.17)

3
(0.12)

22 (0.87)

22 (0.87) 13 (0.51)
3
(0.12) 4.5 (0.18)
4.2 (0.17)

ACTUATOR
20.5 (0.81)
25.5 (1.0)

50 (1.97)

To Order
Model No. Description Circuits Cable Length
SMC-139006 Coded non-contact stainless steel safety switch 2 NC (safety) 1 NO (auxiliary) 5 m (16.4')
SMC-139007 Coded non-contact stainless steel safety switch 2 NC (safety) 1 NO (auxiliary) 10 m (32.8')
Ordering Example: SMC-139006 coded non-contact stainless steel safety switch with 2 NC (safety) and 1 NO (auxiliary) circuits and 5 m (16.4') cable.