Indeco Welding Cable WS-105 600 V Contact

WS-105 600 V 2/0 AWG FB Local Sales

[email protected]

Nexans Ref.: P00001350-7

Electric AC/DC arc welding equipment extensions.

DESCRIPTION
Application:

Electric AC/DC arc welding equipment extensions between the transformer or the
converter and the clamp that holds the electrode.

Construction:

1. Conductor: Flexible Soft copper, class 5 or 6.

2. Tape: Polyester tape.

STANDARDS
3. Outer sheath: Thermoplastic rubber.
International IEC 60228;
Main characteristics:
IEC 60332-1-2
Increased safety due to its mechanical strength and toughness of the sheath.
National ICEA S-19-81;
Resistance to heat, moisture, grease, oils and allows a higher resistance to welding
ICEA S-95-658; NTP-IEC 60228;
sparks. Allows a higher current due to thermoplastic rubber compound can support up
UL 2556
to 105° of conductor temperature.

Gauge:

From 8 AWG up to 500 kcmil.

Marking:

INDECO S.A. WS-105 600 V - Gauge - FB - Year - Sequential length.

Packing:

Non returnable wooden reels.

Colour:

Black.

National standards

NTP-IEC 60228: Conductors of insulated cables.

International standards

ICEA S-19-81: Rubber-Insulated Wire and Cable for the Transmission and Distribution
of Electrical Energy.

Conductor flexibility Ope. volt. Flame retardant Oil resistance Bending factor installed Maximum operating temperature
Class 5 & Class 6 0.6 kV IEC 60332-1-2; FT1 ICEA S-95-658 4 (xD) 105 °C

All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Version 2.0 Generated 10/20/21 www.nexans.pe Page 1 / 3
Indeco Welding Cable WS-105 600 V Contact
WS-105 600 V 2/0 AWG FB Local Sales
[email protected]

IEC 60228: Conductors of insulated cables.

ICEA S-95-658: Power cables rated 2000 volts or less for the distribution of electrical
energy. Section 6.4.2: Oil: Oil Immersion Test.

IEC 60332-1-2: Test for vertical flame propagation for a single insulated wire or cable -
Procedure for 1 kW pre-mixed flame.

UL 2556: Wire and Cable Test Methods. Section 9.3: FT1 (Vertical-Specimen) Flame
Test.

CHARACTERISTICS
Construction characteristics
Conductor material Soft copper
Conductor flexibility Class 5 & Class 6
Outer sheath TPR (thermoplastic rubber)
Sheath colour Black
Dimensional characteristics
Conductor cross-section (AWG) 2/0
Conductor cross-section - kcmil
Conductor diameter 11.1 mm
Minimum outer sheath thickness 2.21 mm
Nominal outer diameter 16.0 mm
Diameter over Sheath 16 mm
Approximate weight 687 kg/km
Electrical characteristics
Operating voltage 0.6 kV
Dielectric strength 3.5 kV
Time of application Dielectric strength core to screen AC - min.
Max. DC resistance of the conductor at 20°C 0.2784 Ohm/km
Perm current rating in air 30°C 602 A
Usage characteristics
Flame retardant IEC 60332-1-2; FT1
Oil resistance ICEA S-95-658
Bending factor when installed 4 (xD)
Maximum operating temperature 105 °C
Overload maximum core temperature 140 °C
Short-circuit max. conductor temperature 250 °C

Conductor flexibility Ope. volt. Flame retardant Oil resistance Bending factor installed Maximum operating temperature
Class 5 & Class 6 0.6 kV IEC 60332-1-2; FT1 ICEA S-95-658 4 (xD) 105 °C

All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Version 2.0 Generated 10/20/21 www.nexans.pe Page 2 / 3
Indeco Welding Cable WS-105 600 V Contact
WS-105 600 V 2/0 AWG FB Local Sales
[email protected]

Usage characteristics
Midspan No
Reference 06

BENDING RADIUS WHEN INSTALLED

R=fxD
R: Bending radius when installed (mm).
f: Multiplicative factor.
D: Cable nominal outer diameter (mm).

NOTE WS

The amperage given is for a intermittence service of the 30%, to obtain the amperage for a continuos service have
to multiply by the factor 0.55

Ambient Temperature: 30°C

Conductor flexibility Ope. volt. Flame retardant Oil resistance Bending factor installed Maximum operating temperature
Class 5 & Class 6 0.6 kV IEC 60332-1-2; FT1 ICEA S-95-658 4 (xD) 105 °C

All drawings, designs, specifications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is
indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Version 2.0 Generated 10/20/21 www.nexans.pe Page 3 / 3