Information on Disposal for Users of Waste Electrical & Electronic Equipment

(private households)
This symbol on the products and/or accompanying documents means that used electrical and
electronic products should not be mixed with general household waste.
For proper treatment, recovery and recycling, please take these products to designated collection
points, where they will be accepted on a free of charge basis. Alternatively, in some countries you
may be able to return your products to your local retailer upon the purchase of an equivalent new
product.
Disposing of this product correctly will help to save valuable resources and prevent any potential negative
effects on human health and the environment which could otherwise arise from inappropriate
waste handling. Please contact your local authority for further details of your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

Operating Instructions

Plasma Television
Model No.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further
information.

TH-37PV7P
TH-42PV7P
TH-50PV7P

Information on Disposal in other Countries outside the European Union

This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of
disposal.

INPUT
ASPECT

EXIT

OK
MENU

RETURN

OPTION DIRECT TV REC

0
VCR

TEXT

F.P.

INDEX HOLD

REC

VCR

DVD

PROGRAMME

TV

Customers Record
The model number and serial number of this product may be found on its rear panel. You should note this serial
number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your
purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model Number

Serial Number

English

Matsushita Electric Industrial Co., Ltd.

Web Site : https://www.panasonic-europe.com
2007 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
Printed in Czech Republic

Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.

Turn your own living room into a movie theatre!

Experience an amazing level of multi-

media excitement

Contents
Be Sure to Read

Enjoy rich multi-media

Safety Precautions 4
(Warning / Caution)
Notes 5
Maintenance 5

Quick Start Guide

Accessories / Options 6
Attaching the pedestal 7
Identifying Controls 9
Basic Connection 10
Auto Setup 12

Set top box

Amplifier with
Speaker system

Quick Start Guide

Camcorder

DVD Recorder

VCR

DVD player

Basic Features

Watching TV 14
Watching Videos and DVDs 16
Viewing Teletext 18

Viewing

Enjoy your TV!

Advanced Features
How to Use Menu Functions 20
(picture, sound quality, etc.)
Editing and Setting Channels 24
Control Channel Audience 26
Restore Settings 27
Input Labels 28
Q-Link Functions 30
HDMI Functions 31
(HDMI terminal / VIERA Link)
External Equipment 34

Technical Information 36
FAQs 38
Licence 39
Specifications 39

FAQs, etc.

FAQs, etc.

Advanced

Safety Precautions

Notes

Warning

Caution

Do not display a still picture for a long time

When cleaning the TV, remove the

mains plug

Handling the mains plug and lead

Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause fire.)
Ensure that the mains plug is easily accessible.
Ensure the grounding pin on the mains plug is securely connected to prevent electrical shock.
An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective
earthing connection.
Do not touch the mains plug with a wet hand. (This may cause electrical shock.)
Do not use any mains lead other than that provided with this TV. (This may cause fire or electrical shock.)
Do not damage the mains lead. (A damaged lead may cause fire or electrical shock.)
Do not move the TV with the lead plugged in the socket outlet.
Do not place a heavy object on the lead or place the lead near a high-temperature object.
Do not twist the lead, bend it excessively, or stretch it.
Do not pull on the lead. Hold onto the mains plug body when disconnecting lead.
Do not use a damaged mains plug or socket outlet.

(Cleaning an energized TV may cause electrical shock.)

When TV will not be used for a

long time, remove the mains plug
This TV will still consume some power even
in the Off mode, as long as the mains plug is
still connected to a live socket outlet.

Transport only in upright position

Transporting the TV with its display panel
facing upright or downward may cause
damage to the internal circuitry.

Auto power standby function

Allow sufficient space around the

TV for radiated heat
Minimum distance

This causes the image to remain on the plasma

screen (image retention).
This is not considered a malfunction and is not
covered by the warranty.
Typical still images
Channel number and other logos
Image displayed in 4:3 mode
Video game
To prevent image retention, contrast is lowered
automatically after a few minutes if no signals are
sent or no operations are performed. (p. 38)
If no signal is received and no operation is
performed in TV mode for 30 minutes, the TV will
automatically go to standby mode.

Keep the TV away from these equipment

Electronic equipment
In particular, do not place video equipment near the
TV (electromagnetic interference may distort images
/ sound).
Equipment with an infrared sensor
This TV also emits infrared rays (this may affect
operation of other equipment).

10

If you find any

abnormality,
remove the mains plug
immediately!

10

10

(cm)

Do not block the rear air vents

Blocked ventilation by curtains,
etc. may cause overheating, fire
or electrical shock.

AC 220-240 V
50 / 60 Hz

Maintenance
First, remove the mains plug from the socket outlet.

Do not remove covers

NEVER modify the TV yourself

(High-voltage components may cause serious

electrical shock.)
Have the TV checked, adjusted, or repaired at your
local Panasonic dealer.

Keep liquids away from the TV

To prevent damage which may result in fire or
shock hazard, do not expose this appliance to
dripping or splashing.
Do not place containers with water (flower vase,
cups, cosmetics, etc.) above the TV. (including on
shelves above, etc.)

Do not expose to direct sunlight

and other sources of heat

Avoid exposing the TV to direct sunlight and other

sources of heat. To prevent fire never place any
type of candle or naked flame on top or near the TV.

Do not place foreign objects

inside the TV

Do not let metal or flammable objects drop into the

TV through the air vents (fire or electrical shock
may result).

Do not place the TV on sloped

or unstable surfaces
The TV may fall off or tip over.

Use only the dedicated stands

/ mounting equipment
Using an unauthorized stand or other fixtures may
make the TV shaky, risking injury. Be sure to ask
your local Panasonic dealer to perform setup.
Use optional stands / mounts (p. 6).

Display panel
Regular care: Gently wipe the surface clean of dirt by using a soft cloth.
Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral
detergent by 100 times of water. Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.

Caution

The surface of the display panel has been specially treated and may be easily damaged.
Do not tap or scratch the surface with your fingernail or other hard object.
Use care not to subject the surface to bug repellent, solvent, thinner, or other volatile substances
(this may degrade surface quality).

Cabinet
Regular care: Wipe the surface clean using a soft dry cloth.
Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent.
Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.

Caution

Use care not to subject the TV's surfaces to detergent.

(A liquid inside the TV could lead to product failure.)
Use care not to subject surfaces to bug repellent, solvent, thinner, or other volatile substances
(this may deteriorate the surface by peeling the paint).
Do not allow the cabinet to make contact with a rubber or PVC substance for a long time.

Mains plug
Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fire or electrical shock.)

Accessories / Options
Standard accessories
Remote Control
Transmitter

EUR7651120

OK

Check that you have the accessories and items shown

Batteries for the
Clamper (2)
Mains Lead
Remote Control
Transmitter (2)

R6 (UM3)

TV

Operating Instructions

Pedestal (ST-42H2-WK / ST-50H2-WK)

TBLX0024
(TH-37PV7P, TH-42PV7P)
TBLX0025
(TH-50PV7P)
For installation p. 7 and p. 8

Pan European Guarantee Card

Optional accessories
Wall-hanging bracket
(vertical)

(angle)

Assembly screw (4)

Base

Using the clamper

Rear of the TV

Hook

Installing the poles

Securing the poles

For TH-42PV7P,
TH-50PV7P
(Outside)

Do not bundle the RF cable

and mains lead together (could
cause distorted image).
Fix cables with clampers as
necessary.
When using the optional
accessory, follow the options
assembly manual to fix cables.

1. Attach the clamper

Front

For TH-37PV7P
(Inside)
A

Insert the poles into the left and right holes in the
underside of the base so that they fit securely as
shown in the illustration above.

Securing the TV

Use the assembly screws A to secure the poles

firmly to the bottom of the base.
Forcing the assembly screws the wrong way will
strip the threads.

To remove from the TV:

hole

snaps

Note the correct

polarity (+ or -)

View from the bottom

B

Keep pushing
both side snaps

Insert the clamper

in a hole

Caution
Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control.
Do not mix old and new batteries.
Do not mix different battery types (such
as alkaline and manganese batteries).
Do not use rechargeable (Ni-Cd)
batteries.
Do not burn or breakup batteries.

Assembling the pedestal

Close
+

M5 30

Attaching the pedestal

Accessories / Options

Pull
open

Pole (2)

Do not use any other TV and displays.

Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest
Panasonic Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be
strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Use the accessory fall-prevention brackets to secure the TV.
If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal
injury may result.
Two or more people are required to install and remove the TV.
If two or more people are not present, the TV may be dropped, and personal injury may result.

M5 20

In order to maintain the units performance and safety, be absolutely sure to ask your dealer or a licenced
contractor to secure the wall-hanging brackets.
Carefully read the instructions accompanying the plasma TV stand or pedestal, and be absolutely sure to take
steps to prevent the TV from tipping over.
Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage.

Installing remotes batteries

Caution

Assembly screw (4)

Caution

TY-WK42PR2W
TY-WK42PR3W

TY-WK42PV3W

Warning
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.

Quick Start Guide

Attaching the pedestal

2. Bundle the cables

To loosen:

Hole for pedestal

installation

Carry out work on a horizontal and

level surface.
Use the assembly screws
to
fasten securely.

Arrow mark

hooks

Set the tip

in the hooks

knob

Keep pushing
the knob
D

Label

Attaching the pedestal

Identifying Controls

The TV must be fastened to both a base and a wall.

Band (2)

Power LED

Screw (2)

Wood screw (2)

Clamp (2)

Standby: red
On: green

Mains power On / Off switch

Nominal diameter 4 mm 12

Securing to a base

Changes the input mode

Fix pedestal and base together with band.

Function select

/ Contrast / Brightness / Colour /

Volume
Sharpness / Tint (NTSC mode) / Bass /
Treble / Balance / Auto Setup (p. 24)

Standby On / Off switch

Changes the input mode

TV - changes TV mode (p. 16)
AV - changes AV input mode (p. 16)

(Switches TV On or Off standby)

INPUT

OK button to confirm selections and choices

Press after selecting programme positions to
quickly change programme.

Fix to wall or post with strong commercial wire or chain.

EXIT

EXIT (Returns to TV screen)

OK
MENU

RETURN

Main Menu
Press to access VIERA Link, Picture,
Sound and Setup menus (p. 20)

Returns to the previous menu

OPTION DIRECT TV REC

Surround (p. 22)

Remove the screws at both top corners on the rear of the

TV, and attach the clamps
to the TV using the removed
screws.
Remove

Attach

Access VIERA Link Menu (p. 33)

Programme / channel change buttons (0-9)

and Teletext page buttons. (p. 14 and p. 18)
When in Standby mode, switches TV On.

Programme Information (p. 15)

Selects programmes in sequence

Viewing a favourite teletext channel (p. 19)

Coloured buttons used for the

selection, navigation and operation of
various functions
DIRECT TV Recording

To immediately record programme in VCR /

DVD recorder with Q-Link connection
(p. 30)

Option menu
Sets the preferred settings of viewing
and sound options easily (p. 15)
Sound mute On / Off

VCR

Teletext (p. 18)

Cursor buttons to make selections and

adjustments

Identifying Controls
Attaching the pedestal

ASPECT

Securing to a wall

Changes aspect ratio (p. 15)

Quick Start Guide

Increases or decreases the programme

position by one. When a function is
already displayed, press to increase or
decrease the selected function. When
in Standby mode, switches TV On.

Remote control
signal receiver

Volume
TEXT

F.P.

INDEX HOLD

REC
PROGRAMME

VCR

DVD

Still picture (p. 15)

Teletext Hold (p. 19)
Teletext Index (p. 19)

VCR / DVD operations (p. 17)

TV

Basic Connection
External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet first.

Example 1
Connecting aerial

Example 2
Connecting DVD Recorder / VCR

TV only

TV, DVD Recorder or VCR

Rear of the TV

Aerial

TV, DVD Recorder / VCR and Set top box

Rear of the TV

Aerial

AC 220-240 V
50 / 60 Hz

RF
cable

Clamper

Mains lead (supplied)

Aerial

To unfasten
RF cable

AUDIO OUT

PC

Rear of the TV

PR

L
A
U
D
I
O

AC 220-240 V
50 / 60 Hz

PB

Basic Connection

V
I
D
E
O

Quick Start Guide

AC 220-240 V
50 / 60 Hz

Mains lead (supplied)

Example 3
Connecting DVD Recorder / VCR and Set top box

C
O
M
P
O
N
E
N
T

Mains lead (supplied)

SCART cable
(fully wired)

RF cable
RF OUT

RF cable
RF IN
RF IN

DVD Recorder or VCR

SCART cable
(fully wired)

DVD Recorder
or VCR
RF cable

RF OUT

RF cable

SCART cable
(fully wired)
SCART cable
(fully wired)

RF OUT

Note
Connect to AV1 / 2 for a DVD Recorder / VCR supporting Q-Link (p. 30).

RF IN

RF cable

10

RF IN

Set top box

11

Auto Setup
Search and store TV channels automatically.
These steps are not necessary if the setup has been completed by your local dealer.

Plug the TV into mains socket and switch On

(Takes a few seconds to be displayed)

RETURN

Access the menu / store settings after adjustments have been made or options
have been set
select

Country
Germany
Austria
France
Italy
Spain
Portugal
Netherlands

Scan

78

41

Service Name

This will take about 3 mins.

F.P.

INDEX HOLD

Sound Menu

Mode
Bass
Treble
Balance
Surround
Volume Correction
MPX
Reset to Default

RETURN

VCR

EXIT

(example: Sound Menu)

Auto Setup will start to search for

TV channels and store them.
The sorted programme order
depends upon the TV signal,
the broadcasting system and
reception conditions.

EXIT

REC

Return to the previous menu

ON SCREEN HELP Instructions box

Channel
CH 29
CH 33

TEXT

RETURN

Exit the menu system and return to the normal viewing screen

Auto Setup

Using the
On Screen
Displays

Poland
Czech
Hungary
Ireland
E.Eu

Denmark
Sweden
Norway
Finland
Belgium
Switzerland
Greece

Start Auto Setup

VCR

Move the cursor / adjust levels / select from a range of options

store

DVD

Select

PROGRAMME

DOWNLOAD IN PROGRESS
PLEASE WAIT
Programme : 63
Remote control unavailable

TV

If a compatible recording equipment

with Q-Link or similar technologies
(p. 30) is connected, channel
information is automatically
downloaded to the equipment.

Dynamic

Normal

Cinema

Also possible to change the setting

in Picture Menu (p. 22)

select
set

Music

Off
Stereo
Set

EXIT
Change
RETURN

On-screen operation
guide will help you.

Select the picture setting

Viewing Mode

Auto Setup

Nederlands
Suomi
Trke
Portugus
Hrvatski
Romn
Polski

Espaol
Norsk
Dansk
Svenska
Magyar

Slovenina

Move the cursor / select the menu

Select your country

OPTION DIRECT TV REC

Open the main menu

Quick Start Guide

Deutsch
English
Franais
Italiano

etina
Slovenina
Srpski

EXIT

MENU

MENU

select

Mensprache

INPUT

OK

How to use remote control

You can now use the remote

control to turn On the TV or turn
the TV to standby mode.
(Power LED: On)

Select the language

2
ASPECT

Many features available on this TV can be accessed via the On Screen Display
menu.

Note
If tuning has failed Auto Setup (p. 24).
If downloading has failed Download (p. 23).
If you turned the TV Off during Standby mode last time, the TV will be in Standby mode when you turn the TV On
with Mains power On / Off switch.

Auto Setup is now complete and your TV is ready for viewing.

12

To edit channels
Editing and Setting Channels
(p. 24)

13

Watching TV
Other useful functions (Operate after

Turn power on
(Press for about 1 second)
Mains power On / Off switch should be On.

Hold

Freeze / unfreeze picture

HOLD

Check or change the current

programme status instantly

OPTION

INPUT
ASPECT

EXIT
1 BBS
CH05

OK
MENU

SC1

PAL

Corontation Street

Information banner

RETURN

Display the
current
programme
status

OPTION DIRECT TV REC

or

Volume

Teletext Language
Selects teletext language
MPX
Sound Menu (p. 22)
Volume Correction
Adjusts volume of individual channel or input mode

VCR

To select the two-digit programme number, e.g. 39

3
9 (in a short time)

change
select

To change

Note
Also possible to change the settings in Menu list (p. 22 and p. 23).

Viewing

F.P.

up
down

VCR

TEXT

Select a channel

INDEX HOLD

REC

VCR

Display programme information

DVD

PROGRAMME

Channel
1 BBS
SC1

PAL

Corontation Street

STTL TXT Stereo

45
Features available
Sound mute
Colour system
Teletext
Off timer
Stereo sound
Sound system
Programme
Bad Signal Encrypted

To select another channel

To hide

EXIT

Watching TV

AD

TV

Display
information
banner

CH05

To set display timeout

Banner Display Timeout (p. 23)
Appears also when changing channel.
Programme information is referred to
teletext signal.

ASPECT

Change the aspect ratio (p. 36)

Aspect Selection
Auto
16:9
14:9
Just
4:3
4:3 Full
Zoom1
Zoom2
Zoom3

Enjoy viewing the picture at its optimum size and aspect.

Change
aspect
ratio

14

Aspect Selection list

To change the mode

Display Aspect ASPECT
During the list is displayed,
Selection list
select the mode
To change the mode using the ASPECT button only
ASPECT

Select
Change

EXIT
RETURN

Store

(Press repeatedly until you reach the desired mode)

15

Watching Videos and DVDs

Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch the input.
To connect the equipment (p. 10 and p. 11)
The Remote Control is capable of operating some functions of selected Panasonic external equipment.

1
2

INPUT
ASPECT

Panasonic equipment connected to the TV can be directly operated with the remote control.
VCR

Turn the TV on

DVD

When connecting with SCART as example 2 or 3 (p. 10 and p. 11)

Receives input signals automatically when playback starts
Input signals are automatically identified by the SCART (pin 8)
terminal.
This function is also available for HDMI connections (p. 33).
If input mode is not switched automatically
Perform
and
Dependant on the setup of the equipment

Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD

Display the Input select menu

Stop
Stop the operations
Rewind / Skip / Search
VCR: Rewind, view the picture rapidly in reverse
DVD: Skip to the previous track or title
Press and hold to search backward

EXIT

OK
MENU

RETURN

Select the input mode connected to the equipment

Input Selection

OPTION DIRECT TV REC

watch

Fast-forward / Skip / Search

VCR: Fast-forward, view the picture rapidly forward
DVD: Skip to the next track or title
Press and hold to search forward

select

You can also select the input using the AV button on the remote
control or the front panel of the TV.
Press the button repeatedly until the desired input is selected.
You can label or skip each input modes Input Labels (p. 28)

Pause
Pause / Restart
DVD: Press and hold to play at slow speed

Viewing

AV1
AV2/AV2S
COMPONENT
HDMI
TV

VCR / DVD switch

Select VCR to operate Panasonic VCR or DVD equipment
Select DVD to operate Panasonic DVD equipment or Player home theatre

VCR

F.P.

INDEX HOLD

REC

VCR

DVD

PROGRAMME

View
Displays the selected mode
REC

Record
Start recording

Setting your remote control to operate Panasonic VCR, DVD, etc.

Set the VCR / DVD switch to the appropriate position
Press and hold
during the following operations

TV

Enter the appropriate code for the equipment

to be controlled, see table below

To return to TV

16

Note

VCR

DVD

Press

VCR position
Equipment
VCR
DVD

If the external equipment has an aspect adjustment function, set to 16:9.

For details, see the manual of the equipment or ask your local dealer.

VCR

Code
10 (default)
11

DVD position
Equipment
DVD
Player home theatre

Watching Videos and DVDs

TEXT

Programme Up / Down
Select programme

PROGRAMME

Code
70 (default)
71

Note
Confirm correct operation after the code changed.
The codes will be reset to default values if batteries are replaced.
DVD means DVD player, DVD recorders and Recorder home theatre.
Some operations may not be possible on some equipment models.

17

Viewing Teletext
You can enjoy teletext broadcasting, including news, weather forecasts and subtitles, if this service is
provided by the broadcasters.
What is FLOF (FASTEXT) mode?

In FLOF mode, four differently coloured subjects are situated at the bottom of the screen. To access more
information about one of these subjects, press the appropriately coloured button. This facility enables fast access to
information on the subjects shown.

If you wish to hold the current page without updating

HOLD

What is List mode?

In List mode, four differently coloured page numbers are situated at the bottom of the screen. Each of these
numbers can be altered and stored in the TVs memory. (Store frequently viewed pages, p. 19)

To change mode
ASPECT

EXIT

Sub page number

Switch to Teletext
TEXT

OK
MENU

RETURN

<< 01 02 03 04 05 06 07

Displays Index
(content varies
depending on the
broadcasters)

Current
page
number

>>

17:51 28 Feb

Time / date

TELETEXT
INFORMATION

View in
multi
window

Colour bar

up

or

or

red

green yellow blue

(Corresponds to the colour bar)

VCR

As the blue bar is displayed

To adjust contrast

(Press twice)

Select Picture and text

On or Off

Operations can be made only in Teletext screen.

MENU

Store
frequently
viewed
pages

As page is
displayed

To change stored pages

The number changes to white.

Enter new page number

Colour button you

want to change

(List mode only)

press
and
hold

Corresponding
colour button

TEXT

To return to TV

DVD

MENU

press
and
hold

VCR

Call up the page stored in blue.

Factory setting is P103.

Watch TV and Teletext in two windows at once

INDEX HOLD

REC

F.P.

Viewing

down

VCR

F.P.

INDEX

Store frequently viewed pages in the colour bar

Select the page

TEXT

HOLD

Return to the main index page

Call up a
favourite
pages

OPTION DIRECT TV REC

To resume

HOLD

Teletext in Setup Menu (p. 23)

INPUT

INDEX

Stop or resume automatic updating

VCR

PROGRAMME

Viewing Teletext

View sub page (Only when teletext is more than one page)
Appears at upper-left
corner of the screen
TV

View sub
page

red

Re-hide

(BOTTOM)

MENU

green

(Expand the TOP half)

18

example: P6
6
0
0
0
Sub pages:
The number of sub pages varies depending on the broadcasters (up to 79 pages).
It may take some time for searching, during which time you can watch TV.

View the TV picture while searching for a teletext page

red
(TOP)

FULL /
TOP /
BOTTOM

blue

Reveal hidden words e.g. quiz page answers

MENU

Enter the
4-digit number

MENU

Using teletext conveniently

Reveal
hidden
data

To view specific sub page

(Expand the BOTTOM half)

Normal (FULL)

Watch
TV while
waiting
for update

Teletext automatically updates itself when new information becomes available.

Changes to TV screen temporarily
P108

MENU

yellow

Appears
when
updating is
completed

yellow

View the
updated
page

(You cannot change the channel.)

The news page provides a function that indicates arrival of latest news (News Flash).

19

How to Use Menu Functions

Various menus allow you to make settings for the picture, sound, and other functions.

Overview

Display the menu

MENU

Main Menu

Displays the functions that can be set

(varies according to the input signal)

VIERA Link

INPUT
ASPECT

Picture

OK
RETURN

Setup

access

Main Menu

Picture Menu

select

(example: Picture Menu)

F.P.

Picture Menu

Viewing Mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance
Colour Management
P-NR

INDEX HOLD

REC

VCR

DVD

PROGRAMME

TV

To return to TV
at any time

To return to the

Picture Menu

MPEG NR
3D-COMB
Reset to Default

select

(p. 22)

Warm
Off
Off

Adjust or select
Picture Menu

Viewing Mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance
Colour Management
P-NR

1/2

Dynamic

Sound Menu

Mode
Bass
Treble
Balance
Surround
Volume Correction
MPX
HDMI Input
Reset to Default

change
store or access
(Required by some
functions)

Warm
Off
Off

Music

Off
Stereo
Auto
Set

(p. 22)

(example: Picture Menu)

Choose from among alternatives

Number and positions
of alternatives
Colour Balance

Q-Link Settings

Q-Link
AV2 out
Download

Normal

Setup Menu

Changed

AV Colour System
Q-Link Settings
Child Lock
Tuning Menu
Off Timer
Language
Teletext
Shipping Condition
Power Save

Adjust using the slide bar

Sharpness

Note
To initialize all settings
Shipping Condition
(p. 27)

2/2

Off
Off
Set

(example: Picture Menu)

previous screen
RETURN

Dynamic

Warm
Off
Off

Moved

Go to the next screen

Tuning Menu

Access

Displays the next screen

To change menu pages

(p. 23)
Tuning Menu

Auto Setup
Programme Edit
Manual Tuning

Access
Access
Access

(p. 24)
2/2

Off
Access
3 seconds
On
100Hz
Access
Access

(p. 23)

up
down

1/2

Auto
Access
Access
Access
Access
Off
Access
FLOF
Access
Off

Setup Menu

Side Panel
Input Labels
Banner Display Timeout
VIERA Link
Refresh Rate
Software License
System Information

AV2
TV
Access

Advanced

EXIT

1/2

How to Use Menu Functions

(picture, sound quality, etc.)

Select the item

1/2

Dynamic

Viewing Mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance
Colour Management
P-NR

Setup

VCR

20

(p. 33)

VIERA Link

Sound
OPTION DIRECT TV REC

The menu of the accessed

equipment

Recorder
Home Cinema

Sound

Select the menu

Picture

VIERA Link Control

Speaker Selection

EXIT

MENU

TEXT

VIERA Link Menu

Only available items can be selected.

21

How to Use Menu Functions

Menu list

Menu list
Item

Menu

Adjustments / Configurations (alternatives)

Viewing Mode

Basic picture mode (Dynamic / Normal / Cinema)

Set for each input signal

AV Colour System

Q-Link Settings

VIERA Link

Speaker Selection

Controls the connected Panasonic equipment

Easy control only with VIERA remote control (p. 33)
Speaker control (p. 33)
You can also access VIERA Link Menu directly using the VIERA Link button on the
remote control.

VIERA Link Control

Contrast, Brightness, Adjusts colour, brightness, etc. for each picture mode to suit your taste
Colour, Sharpness
Tint

Adjusts tint of image

For NTSC signal reception only

AV1 / AV2 out

Chooses the signal to be transmitted from the TV to Q-Link (TV / AV1 / AV2 / Monitor)
Monitor: Image displayed on screen
Component and HDMI signals cannot be outputted

Download

Downloads channel information to a Q-Link compatible equipment connected to the TV

Automatically sets the channels received in the area (p. 24)

Programme Edit

Edits channels (p. 25)

Manual Tuning

Sets the channels manually (p. 25)

P-NR

Picture Noise Reduction

Automatically reduces unwanted picture noise (Off / Normal / Dynamic / Auto)
Not valid on HDMI

MPEG NR

Automatically reduces noise for watching DTV, DVD and VCD (Off / Min /Mid / Max)

Off Timer

3D-COMB

Automatically makes still pictures and slow pictures look more vivid (Off / On)
For PAL or NTSC signal reception only
Not valid on RGB, S-Video, components and HDMI

Basic sound mode (Music / Speech)

Bass

Adjusts the output level of deep bass

Treble

Adjusts the output level of high-pitch, shrill sound

Balance

Adjusts volume level of right and left speakers

Surround

Surround sound settings (Off / On)

Provides a dynamic enhancer to simulate improved spatial effects
Switching is also possible by the Surround button on the remote control (p. 9)

Volume Correction

Adjusts volume of individual channel or input mode

MPX

Select stereo / monaural (Mono / Stereo)

Normally: Stereo
Stereo signal cannot be received: Mono
M1 / M2: Available while mono signal is transmitted

HDMI Input

Select to fit the input signal (Auto / Digital / Analogue) (p. 31)
Auto
: Automatic detection of digital or analogue sound source
Digital
: HDMI cable connection
Analogue : HDMI-DVI adapter cable connection
HDMI input mode only

Reset to Default

Press the OK button to reset the present Sound Mode to the default settings

Sets the time the TV automatically turns Off (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)

OSD Language

Changes language for on-screen displays

Teletext
Language

Selects teletext language (West / East1 / East2)

West: English, French, German, Greek, Italian, Spanish, Swedish, Turkish
East1: Czech, English, Estonian, Lettish, Rumanian, Russian, Ukrainian
East2: Czech, Hungarian, Lettish, Polish, Rumanian

Teletext

Teletext display mode (FLOF / List) (p. 18)

Shipping Condition

Resets all settings, for example, when moving house (p. 27)

Power Save

Reduces brightness of picture to economise on power consumption (Off / On)

Side Panel

Increases the brightness of the side panel (Off / Low / Mid / High)
The recommended setting is High to prevent panel image retention

Input Labels

Labels or skips each input terminals (p. 28)

Banner Display
Timeout

Sets how long the information banner (p. 15) stays on screen
0 (No display) to 10 sec. in 1-sec. increments

VIERA Link

Sets to use VIERA Link functions (Off / On) (p. 32)

Refresh Rate

Changes the image processing of the panel (depending on the input signal) (50Hz / 100Hz)
Set to 100Hz normally

Software License

Displays the software licence information

System Information

Displays the system information of this TV

Advanced

Mode

Setup

Sound

Press the OK button to reset the present Picture Mode to the default settings

Language

Automatically adjusts colours to vivid ones (Off / On)

How to Use Menu Functions

(picture, sound quality, etc.)

Auto Setup

Locks a programme channel to prevent access to it (p. 26)

Colour Management

Reset to Default

Child Lock

Chooses the colour balance of the entire image (Cool / Normal / Warm)

Selects optional colour system based on video signals in AV mode

(Auto / PAL / SECAM / M.NTSC / NTSC)
Selects which AV terminal is to be used for data communication between this TV and a
compatible recording equipment (AV1 / AV2) (p. 30)

Colour Balance

Adjustments / Configurations (alternatives)

Q-Link

Tuning Menu

Picture

22

Item

Menu

Only available items can be selected.

23

Editing and Setting Channels

The current channel settings can be changed according to your needs and reception conditions.

INPUT
ASPECT

EXIT

Select the channel to edit

Prog. Chan. Name Sound Sys. Colour Sys.

OPTION DIRECT TV REC

select

Select Tuning Menu

Setup Menu

DVD

PROGRAMME

access

1/2

Q-Link Settings
Child Lock
Tuning Menu
Off Timer
Language
Teletext
Shipping Condition
Power Save
Side Panel

INDEX HOLD
VCR

Access
Off

select

FLOF
Off
Off

access

Tuning Menu

Auto Setup
Programme Edit
Manual Tuning

To return to TV

Access
Access
Access

Edit
channels
Programme
Edit

Delete
Add
Move
Change
name
Change
sound
system
Change
colour
system

CH60

SC1

Auto

CH21

SC1

Auto

456

select

Name

Channel

3 FTP
CH05

SC1

PAL

Corontation Street

red

To add

red

green

After confirming, press green

To move

yellow

Select new
position

yellow

To change the name of the broadcaster displayed when selecting channels

Programme Edit

Select the Name field

Prog. Chan. Name Sound Sys. Colour Sys.

1

CH33

123

SC1

Auto

CH21

XYZ

SC1

Auto

CH21

FTP

SC1

Auto

CH60

SC1

Auto

CH21

SC1

Auto

456

red

Enter the User input mode

Select the character
Set (Maximum: five characters)

RETURN

Store

To change sound system based on signals

1

CH33

123

SC1

Auto

Select the
Sound Sys. field
Select
sound system

CH21

XYZ

SC1

Auto

CH21

FTP

SC1

Auto

CH60

CH21

456

SC1

Auto

SC1

Auto

SC1 :
SC2 :
SC3 :
F:

PAL B, G, H / SECAM B, G
PAL I
PAL D, K / SECAM D, K
SECAM L / L

To change colour system based on signal

All tuning data will be erased

EXIT

Channel
CH 29
CH 33

78

41

CH33

123

SC1

Auto

CH21

XYZ

SC1

Auto

CH21

FTP

SC1

Auto

CH60

CH21

456

SC1

Auto

SC1

Auto

Select colour system

Service Name

RETURN

Fine Tuning

This will take about 3 mins.

All previous settings are erased.

The settings are downloaded to a Q-Link compatible equipment connected to the TV.
When the operation is completed, the broadcast of programme number 1 will appear.
If tuning has not done completely Manual Tuning

For Auto Setup, using the buttons on the front of the TV

Press repeatedly until Auto Setup appears

Access Auto Setup
Start Auto Setup

Select the Colour Sys. field

Prog. Chan. Name Sound Sys. Colour Sys.

Settings are made automatically

Scan

Normally, select Auto

Programme Edit

Advanced

Auto Setup

Auto Setup

24

Auto

Set

Start Auto Setup

Auto Setup

SC1

Prog. Chan. Name Sound Sys. Colour Sys.

Automatically set the channels received in the area.

If a Child Lock PIN number (p. 26) has been set, it must be entered.

FTP

Programme Edit

select

EXIT

Set channels
automatically

CH21

Edit

Select a function

Start Auto Setup

Auto

Editing and Setting Channels

REC

Auto

SC1

F.P.

SC1

XYZ

After confirming, press

Setup

VCR

TEXT

123

CH21

VIERA Link

Sound

CH33

To delete

access

Main Menu
Picture

Cursor

Select Setup

RETURN

To change channel number

Manual Tuning

Programme Edit

MENU

OK
MENU

Edit the programme position settings

Display the menu

To return to TV

Use to make small adjustments to the tuning of an individual channel (affected by weather
conditions, etc.)

Set
channels
manually
Manual
Tuning

Manual Tuning

Set channel manually after Auto Setup.

If a VCR is connected with only the RF cable, select programme position 0.

Manual Tuning
Programme
Fine Tuning
Manual Tuning

[CH33]

78

Select the programme position

1

41

Select the channel

Search and store

search
store

VCR

25

Control Channel Audience

Restore Settings

You can lock specific channels and control who watches them.
(When a channel is selected, a message appears; by entering the PIN number, you can watch the
channel.)

Resets the TV to its original condition, i.e. no channels tuned in.

All settings (channels, picture, sound quality, etc.) are reset.

INPUT
ASPECT

EXIT

Display the menu

MENU

Display the menu

Select Setup

MENU

INPUT
ASPECT

OK
MENU

RETURN

OPTION DIRECT TV REC

Select Setup

OK

access

MENU

Main Menu

RETURN

VIERA Link
Picture

EXIT

select

Sound

OPTION DIRECT TV REC

F.P.
REC

INDEX HOLD
VCR

DVD

PROGRAMME

Setup Menu

access

1/2

Q-Link Settings
Child Lock
Tuning Menu
Off Timer
Language
Teletext
Shipping Condition
Power Save
Side Panel

EXIT

VCR

select

Off
FLOF
Off
Off

TEXT

F.P.
REC

To return to TV

Setup

Access

INDEX HOLD
VCR

DVD

PROGRAMME

To return to TV
EXIT

Child Lock-PIN Entry

1 of 2

Select Service List

Access

Child Lock Service List

1
7
14
70
72
80
85
90

Service Name
BBC
THREE
E4
CBBC
Nwk
BBCi
Radio
Cymru

Wed 12/05/04 10:46

set

To change the PIN number

Select Change PIN in

26

select

Lock

Appears when the channel is locked

access

1/2

select

Off
FLOF
Access
Off
Off

Set

Check the message and initialise

Shipping Condition

select

Select the channel to be locked

Child Lock

Enter the PIN number twice at first

setting.
Make a note of the PIN number in
case you forget it.

access

Child Lock

Control
channel
audience

Setup Menu

Q-Link Settings
Child Lock
Tuning Menu
Off Timer
Language
Teletext
Shipping Condition
Power Save
Side Panel

Restore
Settings

To cancel
Select the locked channel
To lock all channels

Note

Confirm

set

EXIT
RETURN

Shipping
Condition

Follow the on-screen instructions

yellow

To cancel all channel locks

and enter a new PIN number twice.

All tuning data will be erased

Are you sure?
Are you sure?

Advanced

* * * *

VCR

Change PIN
Service List

Select Shipping Condition

Set

Enter the PIN number (4 digits)

Please enter new PIN
PIN

select

Sound

Restore Settings
Control Channel Audience

TEXT

Select Child Lock

0
VCR

VIERA Link
Picture

Setup

access

Main Menu

blue

Auto Setup will automatically start. (p. 12)

To re-tune TV channels only, e.g. after moving house

Auto Setup (p. 24)

Setting Shipping Condition (p. 27) erases the PIN number and all settings.

27

Input Labels
For easier identification and selection of the input mode, you can label each input terminals or skip
terminal that is not connected to any equipment.
(To select the input mode p. 16)

You can name each input terminals freely.

Display the menu

Select User input

MENU

Input Labels

AV1
AV2/AV2S
COMPONENT
HDMI

User input
AV2/AV2S
COMPONENT
HDMI

select
access

INPUT
ASPECT

EXIT

OK
MENU

RETURN

User input

Select Setup
Main Menu
Picture

select

Sound

0
VCR

VCR

K
3
k
.

L M N O P Q R S
4 5 6 7 8 9 ! :
l m n o p q r s
* _

T
#
t

set

(maximum: ten characters)

Select Input Labels

Setup Menu

2/2

Input Labels
Access
Banner Display Timeout 3 seconds
On
VIERA Link
Refresh Rate
100Hz
Software License
System Information

access

select

PROGRAMME

Select a input terminal and set

Input Labels

AV1
AV2/AV2S
COMPONENT
HDMI

DVD
AV2/AV2S
COMPONENT
HDMI

set
select

Advanced

TV

EXIT

J
2
j
-

RETURN

DVD

To return to TV

F G H I
Z
0 1
f g h i
z ( ) +

Store

INDEX HOLD

REC

A B C D E
U V W X Y
a b c d e
u v w x y

Input Labels

F.P.

Setup

Name

TEXT

select

User input

access

VIERA Link

OPTION DIRECT TV REC

Set characters

The labels you set will be displayed in Input Selection menu (p. 16) or banner.
If Skip is selected, you cannot select the mode.
How to set User input p. 29

28

29

Q-Link Functions

HDMI Functions

Q-Link connects the TV and VCR / DVD recorder, enables easy recording and playback.

HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and highquality sound by connecting the TV and the equipment.
HDMI-compatible equipment (1) with an HDMI or DVI output terminal, such as a set top box or a DVD
player, can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.
About connections, see External Equipment (p. 34).

Condition

Use the VCR / DVD recorder with the following logos:

Q-Link, NEXTVIEWLINK, DATA LOGIC, Easy Link, Megalogic, or SMARTLINK
Connect the equipment to this TVs AV1 or AV2 terminal via a fully-wired SCART cable. (p. 34)
Q-Link terminal setup in Setup menu (Q-Link, AV1 / AV2 out). (p. 23)

Download channel settings

Perform Auto Setup. (p. 24)

When first using this TV, see Auto Setup. (p. 12)
Perform download to the equipment. (p. 23)

Features available

Some recording equipments are not applicable. Read the manuals of the equipment.

INPUT
ASPECT

EXIT

Direct TV Recording:
Recording the current programme in VCR / DVD recorder
immediately.
DIRECT TV REC

OK
RETURN

OPTION DIRECT TV REC

(1): The HDMI logo is displayed on HDMI-compliant equipment.

(2): Enquire at your local digital equipment retailer shop.

Summary of Control functions

Connecting with an HDMI cable to Panasonic equipment with VIERA Link function, you can control the equipment
(p. 32). You can use VIERA Link and Q-Link functions together.

0
VCR

VIERA Link only

(HDMI)

Q-Link only
(SCART)

Easy playback

Recording information or if recording is not possible, a message is displayed.

(Only when the programme number is 0 or AV mode for some equipment.)

Power on link

Power off link

Speaker control

O
(not via SCART)

Power
on link
and Easy
playback

When VCR or DVD recorder starts playback or direct navigator / function menu
for the equipment are activated, the TV is turned on and input mode is switched
automatically so that you can view the content. (Only when TV is in Standby mode.)

Easy control only with

VIERA remote control

O
(not via SCART)

Direct TV Recording

O
(not via HDMI)

Channel download

O
(not via HDMI)

Power off
link

When TV is set to Standby mode, the recording equipment is also automatically

set to Standby. (Only when the videocassette or DVD is not active.)

DATA LOGIC (a trademark of Metz Corporation)

Easy Link (a trademark of Philips Corporation)
Read the manuals of the equipment too.

30

Advanced

Information
/ Message

Connection

VIERA Link and Q-Link

(HDMI)
(SCART)

Function

HDMI Functions
Q-Link Functions

When Direct TV Recording is performed, the

recording equipment is automatically turned on if it
is in Standby mode.
The recording equipment is recording from its own
tuner. You can turn the TV off during recording.
If you turn the TV off during recording from an AV
source, the recording will be stopped.

What you
see is
What you
record

MENU

Note
HDMI is the worlds first complete digital consumer AV interface complying with a non-compression standard.
If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adapter cable (2).
When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal (use
COMPONENT-AUDIO terminals).
Audio settings can be made on the HDMI Input menu screen. (p. 22)
Applicable audio signal sampling frequencies (2ch L.PCM): 48 kHz, 44.1 kHz, 32 kHz
Use with a PC is not assumed.
If the connected equipment has an aspect adjustment function, set the aspect ratio to 16:9.
This HDMI connector is type A.
This HDMI connector is compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection.
An equipment having no digital output terminal may be connected to the input terminal of either Component,
S-VIDEO, or Video to receive analogue signals.
The HDMI input terminal can be used with only the following image signals:
480i, 480p, 576i, 576p, 720p, 1080i and 1080p. Match the output setting of the digital equipment.
For details of the applicable HDMI signals, see p. 37.

Megalogic (a trademark of Grundig Corporation)

SMARTLINK (a trademark of Sony Corporation)

31

HDMI Functions
VIERA Link

ControlTM

EXIT

RETURN

Select Setup
Main Menu

access

VIERA Link

Sound

RETURN

VIERA Link Menu

Easy
control
only with
VIERA
remote
control

VIERA Link Control

Speaker Selection

Recorder
Home Cinema

EXIT

select

Select the
equipment you
want to access

Operate the menu of the equipment

DVD Recorder DIGA

REC
PROGRAMME

32

INDEX HOLD
VCR

DVD

The same functions with

the OPTION button of the
equipment
Access when the key words
are displayed on colour bar

HD Video Camera

Player theatre
Start

ALL

HDD
Playback

Listen

Recording

Watch
Import/Record

Delete

8/8

Copy

To Others

Setup

DATE/TIME 2006.12. 1 10:46

About the operations for the equipment, read the manual of the equipment.

Easy
playback

Automatic Input switching-When the connected Panasonic equipment is operated, input

mode is switched automatically. When it is stopped operating, input mode is returned.

Power on
link

When the connected Panasonic equipment starts playback or direct navigator /

function menu for the equipment are activated, the TV is automatically turned on.
(Only when TV is in Standby mode.)

Power off
link

When TV is set to Standby mode, the connected Panasonic equipment is also

automatically set to Standby.

This function will work even if the TV enters standby mode automatically by Off Timer
function or auto power standby function.

You can control the theatre speaker with TVs remote control.
This function is available when Panasonic Amplifier or Player theatre is connected.

Select VIERA Link

Setup Menu

Input Labels
Banner Display Timeout 3 seconds
VIERA Link
On
Refresh Rate
100Hz
Software License
System Information

2/2

If you cannot access the menu, check the

settings and the equipment (p. 32).

select

Speaker
control

Select Speaker Selection

Volume up / down

VIERA Link Menu

VIERA Link Control

Speaker Selection

Set to On
(default is On)

set

Home Cinema

Adjustment for equipment

(automatically turned on if it is in
Standby mode).

Display VIERA Link Menu

Recorder
Home Cinema

select
F.P.

red green yellow blue

Exit the menu

Example:
FUNCTION MENU

select

Setup

VCR

TEXT

OPTION

select
access

Return to the previous

menu

Picture

OPTION DIRECT TV REC

Store / Set / Access

Advanced

OK
MENU

Move the cursor / access /

adjust

HDMI Functions

ASPECT

MENU

If you cannot access the menu, check the

settings and the equipment (p. 32).

Select VIERA Link Control

Move the cursor / select the

menu

Display VIERA Link Menu

INPUT

Available VIERA remote control buttons:

(depending on the connected equipment)

Access the menu of the equipment

Display the menu

Enjoy additional HDMI Inter-Operability with Panasonic products which have HDAVI Control function.
This TV supports HDAVI Control 2 function.
Connections to some Panasonic equipment (DVD Recorder DIGA, HD Video Camera, Player theatre,
Amplifier, etc.) with HDMI cables allow you to interface them automatically.
The equipment with HDAVI Control function enables the following operations:
Easy playback (p. 33)
Power on link (p. 33)
Power off link (p. 33)
Speaker control (p. 33)
In addition, the equipment with HDAVI Control 2 function enables the following operation:
Easy control only with VIERA remote control (p. 33)
These features are limited to models incorporating Panasonics HDAVI Control and VIERA Link.
VIERA Link HDAVI Control, based on the control functions provided by HDMI which is an industry
standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have
developed and added. As such, its operation with other manufacturers equipment that supports HDMI
CEC cannot be guaranteed.
Refer to individual manuals for compatibility information. About applicable equipment, consult your local
Panasonic dealer.
HDMI cable
This function needs an HDMI compliant (fully wired) cable. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonics HDMI cable. Recommended part number:
RP-CDHG15 (1.5 m)
RP-CDHG30 (3.0 m)
RP-CDHG50 (5.0 m)
Preparations
Setup the equipment to enable this function. Read the manuals of the equipment.
About connections, see External Equipment (p. 35). Read the manuals of the equipment too.
For the first time / When adding new equipment, reconnecting equipment or changing setup
After connection turn the equipment on and then switch the TV on.
Select the input mode to HDMI (p. 16), and make sure that an image is displayed correctly.

You can control some functions of the

connected Panasonic equipment with
this TV remote control (point the remote
control at the TVs signal receiver).

Set to Home Cinema

or TV
set

Mute

The sound of TV speakers is mute.

When the equipment is turned off,
TV speakers will be active.

TV

TV speakers are active.

33

External Equipment
These diagrams show our recommendations for how to connect the TV to your various equipment.
For other connections, consult the instructions for each piece of equipment, the table below, and the
specifications (p. 39).

To watch satellite broadcasts

To record / playback

Set top box

DVD Recorder / VCR

RF cable
or

SCART cable
SCART cable
SCART
cable

This slot is for services

by the Panasonic dealer.

Fully wired HDMI

compliant cable

Fully wired HDMI

compliant cable

HDMI equipment
DVD Recorder

To listen with speakers

External Equipment

Amplifier with speaker system

To watch DVDs
(Viewing)
(Listening)

Connector

COMPONENT
Y
PB
PR

Recording / Playback
(equipment)
To record / playback videocassettes / DVDs
(VCR / DVD recorder)
To watch DVDs (DVD player)
To watch camcorder images (Video camera)
To watch satellite broadcasts (Set top box)
To play games (Game equipment)
To use amplifier with speaker system
Q-Link
Direct TV Recording
VIERA Link

34

: Recommended Connection

AUDIO OUT

Use fully wired HDMI compliant cable.

Read the manuals of the equipment too.

Home Cinema

Panasonic
Amplifier

Speaker system

Easy playback, Easy control

Advanced

VIERA Link (p. 32)

Types of connectable equipment to each connector

AV1 AV2

DVD player

only with VIERA remote control

L
R

Panasonic DVD Recorder

Panasonic
Player theatre
Panasonic DVD Recorder,
HD Video Camera, etc.

Speaker system

35

Technical Information
Aspect Ratio

VIERA Link

The optimum size and aspect can be chosen, and you can enjoy finer images. (p. 15)

Auto: Auto aspect determines the best aspect ratio to use to fill your screen. It does this using a four step process
to determine if the picture being viewed is a widescreen picture.
If Auto aspect detects a widescreen signal it switches into the appropriate 16:9 or 14:9 widescreen mode. If Auto aspect
does not detect a widescreen signal then this advanced TV enhances the picture for optimum viewing pleasure.
The text shown on the screen indicates how Auto aspect determined which ratio to use:
WIDE appears in the top left of the screen if a widescreen identification signal (WSS) is found or a signal found
through a SCART terminal. Auto aspect switches to the appropriate 16:9 or 14:9 widescreen ratio. This function
will also work in any aspect mode. Auto appears in the top left of the screen if black stripes above and below
the picture are detected. Auto aspect chooses the best ratio and expands the picture to fill the screen. This
process can take several minutes, depending on the darkness of the picture.

TV/AV1/AV2

4:3 Zoom1 Zoom2 Zoom3

Auto 16:9 14:9 Just 4:3 Full
PAL
O O O O O O
O
O
PAL 525/60
O O O O O O
O
O
M.NTSC
O O O O O O
O
O
NTSC(AV input only) O O O O O O
O
O
525(480)/60i
O O O O O O
O
O
525(480)/60p
O O O O O O
O
O
625(576)/50i
O O O O O O
O
O
625(576)/50p
O O O O O O
O
O
750(720)/50p
O O O O O O
O
O
O
750(720)/60p
O O O O O O
O
O
O
1125(1080)/50i
O O O O O O
O
O
O
1125(1080)/60i
O O O O O O
O
O
O
1125(1080)/50p O O O O O O
O
O
O
1125(1080)/60p O O O O O O
O
O
O

HD
SD
Component/HDMI

O O O

AV1

AV2

HDMI

O
O
O
O

O
O
O
O

O
O

16:9

Zoom2

21
19
17
15
13
11
9
7
5
3
1

Zoom3

Displays a
16:9 letterbox
(anamorphic)
image full-screen
without distortion.

Displays a
2.35:1 letterbox
(anamorphic)
image full-screen
without distortion.
At 16:9, displays
the image at its
maximum (with
slight enlargement).

20
18
16
14
12
10
8
6
4
2

CVBS in (video)
RGB status earth
Status RGB
Earth
-Q-Link data
Status CVBS
Audio in (L)
Audio earth
Audio in (R)

AV2 - Pins 15 and 20 are dependent on AV2 S-VHS /

VIDEO switching.
Socket Earth
CVBS out (video)
CVBS earth
Red in, S.C. - in
Red earth
Green in
Green earth
Blue in
Blue earth
Audio out (L)
Audio out (R)

21
19
17
15
13
11
9
7
5
3
1

20
18
16
14
12
10
8
6
4
2

CVBS in (video)
RGB status earth
Status RGB
Earth
-Q-Link data
Status CVBS
Audio in (L)
Audio earth
Audio in (R)

HDMI terminal
Hot Plug Detect
DDC/CEC Ground
SCL
CEC
TMDS Clock Shield
TMDS Data0
TMDS Data0+
TMDS Data1 Shield
TMDS Data2
TMDS Data2+

19
17
15
13
11
9
7
5
3
1

18
16
14
12
10
8
6
4
2

+5V Power
SDA
Reserved (in cable but N.C. on device)
TMDS Clock
TMDS Clock+
TMDS Data0 Shield
TMDS Data1
TMDS Data1+
TMDS Data2 Shield

Input signal that can be displayed

COMPONENT (Y, PB, PR), HDMI
Mark: Applicable input signal
Signal name
525 (480) / 60i
525 (480) / 60p
625 (576) / 50i
625 (576) / 50p
750 (720) / 60p
750 (720) / 50p
1,125 (1,080) / 60i
1,125 (1,080) / 50i
1,125 (1,080) / 60p
1,125 (1,080) / 50p

COMPONENT

Note

HDMI

FAQs, etc.

Displays a 16:9
letterbox or 4:3
image without
distortion.

Socket Earth
CVBS out (video)
CVBS earth
Red in
Red earth
Green in
Green earth
Blue in
Blue earth
Audio out (L)
Audio out (R)

4:3 Full

Displays a 4:3
image enlarged
horizontally to fit
the screen.

(RGB, VIDEO, S-VIDEO, Q-Link)

Suitable inputs for AV1 include RGB (Red / Green / Blue).

Displays the image

at the standard
14:9 without
enlargement.

Displays the
image at the
standard 4:3
without distortion.

AV2 SCART terminal

(RGB, VIDEO, Q-Link)

Technical Information

4:3

Zoom1

AV1 SCART terminal

14:9

Directly displays
the image at
16:9 without
distortion
(anamorphic).

Displays a 4:3
image full-screen.
Stretching is only
noticeable at
the left and right
edges.

SCART and HDMI terminal information

Just

O
O
O
O
O
O
O
O
O
O

Note

The best ratio is

chosen and the
picture expanded
to fill the screen.

36

TV AV1 AV2 Component

The ratio varies depending on the programme, etc. If the ratio is greater than the standard 16:9, black bands
may appear at the top and bottom of the screen.
If the screen size looks unusual when a widescreen-recorded programme is played back on a VCR, adjust the
tracking of the VCR. (See the VCR manual.)
Aspect mode can be memorized for SD (Standard definition) and HD (High definition) signals separately.
To select the ratio manually:
Auto

HDMI connections to some Panasonic equipment allow you to interface them automatically. (p. 32)
This function may not work normally depending on the equipment condition.
Image or sound may not be available for the first few seconds when the playback starts.
Image or sound may not be available for the first few seconds when Input mode is switched.
Volume function will be displayed when adjusting the volume of the equipment.
Easy playback is also available by using the remote control for Amplifier or Player theatre. Read the manuals of
the equipment.
HDAVI Control 2 is the newest standard (current as of February, 2007) for Panasonics HDAVI Control
compatible equipment. This standard is compatible with Panasonics conventional HDAVI equipment.

Aspect Control Signal

Widescreen signal Control signal through SCART
(WSS)
(pin 8) or HDMI terminal

Aspect modes
Signal name

ControlTM

Signals other than above may not be displayed properly.

The above signals are reformatted for optimal viewing on your display.

37

FAQs

Licence

Before requesting service or assistance, please follow these simple guides to resolve the problem.
If problem still persists, please contact your local Panasonic dealer for assistance.

Trademark Credits
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
HDAVI ControlTM is a trademark of Matsushita Electric Industrial Co., Ltd.

White spots or shadow

images (noise)

On Screen messages - I.e.

EC/AV1

Check the position, direction, and connection of the aerial.

Permanently lit spots on screen

Is the TV in AV mode?
Is the mains lead plugged into the socket outlet?
Is the TV turned On?
Check Picture Menu (p. 22) and volume.
Check all required SCART cables and connections
are firmly in place.

Contrast is lowered when the following conditions

without any user operation for a few minutes:
no signal in AV mode
selected locked channel
selected invalid channel
displayed menu

Power Source

AC 220-240 V, 50 / 60 Hz

Average use

241 W

Standby condition

0.7 W

Aspect Ratio

16:9

Visible screen size

Blurry or distorted image

(no sound or low volume)

Sound level is low

or sound is distorted

Pictures from external equipment

are unusual when the equipment
is connected via HDMI

Other

TV goes into Standby mode

The remote control does not work
An error message appears

Is Sound mute active? (p. 9)

Is the volume set to the minimum?
Sound signal reception may be deteriorated.
Set MPX (p. 22) in the Sound Menu to Mono.
Check Sound system. (p. 25)
Set the sound setting of the connected equipment to 2ch L.PCM.
Check the HDMI Input setting in the Sound Menu. (p. 22)
If digital sound connection has a problem, select analogue sound
connection. (p. 31)
Is the HDMI cable connected properly? (p. 34)
Turn Off the TV and equipment, then turn them On again.
Check an input signal from the equipment. (p. 37)
Use an equipment compliant with EIA/CEA-861/861B.
Off Timer function is activated.
The TV enters Standby mode about 30 min. after broadcasting ends.
Are the batteries installed correctly? (p. 6)
Has the TV been switched On?
Follow the messages instructions.
If the problem persists, contact the authorized Service Centre.

106 cm (diagonal)

127 cm (diagonal)

819 mm (W) 457 mm (H)

922 mm (W) 518 mm (H)

1,106 mm (W) 622 mm (H)

737,280 (1,024 (W) 720 (H)) 786,432 (1,024 (W) 768 (H)) 1,049,088 (1,366 (W) 768 (H))
[4,098 768 dots]
[3,072 720 dots]
[3,072 768 dots]

Speaker

160 mm 42 mm 2 pcs, 8

Audio Output

20 W (10 W + 10 W ), 10% THD

Receiving Systems /
Band name

Aerial - Rear

VHF / UHF

Operating Conditions

Temperature : 0 C - 35 C
Humidity
: 20 % - 80 % RH (non-condensing)

AV1 (Scart terminal)

21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, Q-Link)

AV2 (Scart terminal)

21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, S-Video in, Q-Link)

HDMI

TYPE A Connector

COMPONENT
Output

VIDEO

Y
PB, PR

This TV supports HDAVI Control 2 function.

1.0 V[p-p] (including synchronization)

0.35 V[p-p]

AUDIO L - R RCA PIN Type 2

0.5 V[rms]

AUDIO L - R RCA PIN Type 2

0.5 V[rms] (high impedance)

Dimensions ( W H D )

917 mm 665 mm 320 mm

(With Pedestal)
917 mm 620 mm 95 mm
(TV only)

1,020 mm 725 mm 320 mm

(With Pedestal)
1,020 mm 680 mm 95 mm
(TV only)

1,210 mm 839 mm 370 mm

(With Pedestal)
1,210 mm 793 mm 95 mm
(TV only)

Mass

25.0 k Net (With Pedestal)

23.0 k Net (TV only)

28.0 k Net (With Pedestal)

26.0 k Net (TV only)

39.0 k Net (With Pedestal)

37.0 k Net (TV only)

Note
Design and Specifications are subject to change without notice. Weight and Dimensions shown are approximate.
This equipment complies with the EMC standards listed below.
EN55013, EN61000-3-2, EN61000-3-3, EN55020.

FAQs, etc.

HDMI

Sound is unusual

Turn off the TV with Mains power On / Off switch, then turn it on
again.

94 cm (diagonal)

Sound

No sound is produced

Reset channels. (p. 24)

0.5 W

PAL B, G, H, I, SECAM B, G, SECAM L / L

VHF E2 - E12
VHF H1 - H2 (ITALY)
VHF A - H (ITALY)
UHF E21 - E69
CATV (S01 - S05)
CATV S1 - S10 (M1 - M10)
CATV S11 - S20 (U1 - U10)
CATV S21 - S41 (Hyperband)
PAL D, K, SECAM D, K
VHF R1 - R2
VHF R3 - R5
VHF R6 - R12
UHF E21 - E69
PAL 525/60
Playback of NTSC tape from some PAL Video recorders (VCR)
M.NTSC
Playback from M. NTSC Video recorders (VCR)
NTSC (AV input only) Playback from NTSC Video recorders (VCR)

Connection Terminals

Unusual image is displayed

Set P-NR in the Picture Menu (to remove noise). (p. 22)
Check nearby electrical products (car, motorcycle, fluorescent lamp).
Is Colour or Contrast in the Picture Menu set to the minimum? (p. 22)
Check Colour system. (p. 25)

364 W

Licence
Specifications
Frequently Asked Questions

Screen

No image can be displayed

261 W

TH-50PV7P

Chaotic image, noisy

Actions

TH-42PV7P

Number of pixels

Using AV button please confirm your selection is

S-Video I.e. AV2/AV2S (p. 16).

Problem

38

TH-37PV7P

Sound

Auto aspect is designed to provide you with the best aspect ratio
to use to fill your screen. For user control please see p. 36.

S-Video / black and white picture

Due to production process involved in this

technology this may result in some pixels which are
permanently lit or unlit. This is not a malfunction.

Contrast is reduced

Auto aspect

Please confirm SCART cable and connection. Also

please set AV1 / AV2 out in the Setup Menu (p. 23).

Specifications
Power
Consumption Display panel

You can simply clear these by pressing the button.

Press again to redisplay.

Direct TV record / Q-Link

functions not recording

Neither image nor sound is

produced

39