Spyderco Stretch 2 XL Lightweight C258FPK390 Knife - K390 Drop Point

Spyderco Stretch 2 XL Lightweight C258FPK390 Knife - K390 Drop Point - Blue FRN

Be the first one to write a reviewSKU: SP-C258FPK390

$168.75

Optional Services / Add-onsWant it to shave? - $5.00

Knife is sharpened to a razor edge. This service is done on a 2" x 72" Burr King and finished on a Baldor buffer using a leather wheel. Blades are kept cool so overheating is not an issue. Please keep in mind that items that receive this service are non-refundable. If you feel we have made a mistake, please contact us and we will make it right.

Bronze Heat Colored Satin Screws ONLY - $10.00

Bronze Heat Colored Screws ONLY Add-on - The knife is disassembled and a small amount of heat is applied to the hardware to change it to a bronze color. The pocket clip is left as is.

Bronze Heat Colored Screws & Acid Stonewash Clip - $15.00

Bronze Heat Colored Screws & Acid Stonewash Clip Add-On - The knife is disassembled and a small amount of heat is applied to the hardware to change it to a bronze color. The black paint is stripped off the pocket clip and acid stonewashed to match the blade. Everything is reassembled and tested for fit and finish.

Heat color screws and acid stonewash clip

Acid Stonewash Blade / Clip (Satin ONLY) - $25.00

Acid Stonewash Blade / Clip (Satin ONLY) Add-On - Blades and satin finished clips (not coated) are acid stonewashed. Wire clips cannot be acid stonewashed. Sharpening is included with this add-on. Please allow 10 business days for completion.

Laser Mark Your Knife - only $8.99

*Add-ons will delay shipment by 24-48 hours and are non-refundable (excluding installations).

Have Questions? Check out the Custom Mod and Add-On FAQ

BRANDSpyderco Knives

PRODUCT TYPEKnives

PRODUCT CATEGORYFolding

OVERALL LENGTH8.90"

CLOSED LENGTH4.97"

BLADE LENGTH3.99"

BLADE STEELBohler K390

BLADE TYPEDrop Point

BLADE EDGEPlain

BLADE GRINDFlat

LOCKING MECHANISMBack Lock

HANDLE MATERIALFRN

CARRY4-Way

OPENING MECHANISMThumb Hole

ORIGINJapan

WEIGHT2.6 oz.

BLADE FINISHSatin

STEEL TYPETool Steel

MODELStretch 2 XL

See more Coming Soon at Knives Plus
See more Spyderco Knives products

Spyderco Stretch 2 XL Lightweight Knife - K390 - Blue FRN

The C258FPK390 Spyderco Stretch 2 XL Lightweight Salt knife features a 3.99-inch plain edge drop point blade made of Bohler K390 tool steel, .118 inches thick, with a straight spine, a full flat grind, notched thumb ramp, and the Spyderco hole for ambidextrous one hand opening. The blue FRN (fiberglass reinforced nylon) handle, 4.97-inches closed, has ergonomic contouring and Bi-Directional Texturing for secure grip, sturdy back lock, a lanyard hole, and a 4 position steel pocket clip. The Spyderco Stretch 2 XL Lightweight Knife has an overall open length of 8.90-inches and it weighs 2.6 ounces. Made in Japan.

From Spyderco's Website: With a blade just shy of four inches, the Stretch 2 XL Lightweight offers serious cutting performance in a package that weighs under three ounces. For steel aficionados, this remarkable expression of the design elevates its cutting and edge-holding performance with a blade crafted from Böhler-Uddeholm’s K390 MICROCLEAN®. K390’s advanced alloy mix was specifically developed to provide the extreme wear resistance and strength needed in industrial cutting, blanking, and punching operations. The Stretch 2 XL’s full-flat-ground blade takes full advantage of these qualities and is paired with a linerless fiberglass-reinforced-nylon (FRN) handle injection molded in the signature blue color of Spyderco’s elite K390 family. The Bi-Directional Textured™ handle is also home to the knife’s stout back lock mechanism and a four-position clip that supports left or right-side, tip-up or tip-down carry.