4mm 4 Core Steel Wire Armoured SWA Cable from Hongda Cable

4mm 4 Core Steel Wire Armoured SWA Cable Application

4mm 4 Core Steel Wire Armoured SWA Cable made up of a black PVC sheath, XLPE insulation, copper conductors and steel wire armouring. This type of cable is designed for mains electricity in various applications, including laying underground, power networks, incoming mains to homes amongst a host of other uses externally and internally.

4mm 4 Core Steel Wire Armoured SWA Cable is suitable and often used for direct burial, with the steel wire armouring providing further protection from external damaged. The XLPE insulation is resistant to a number of different fluids, chemicals and has good heat stability, as well as being UV Resistant.

4mm 4 Core Steel Wire Armoured SWA Cable Standard

BS 5467, IEC/EN 60502-1, IEC/EN 60228 , Flame Retardant according to IEC/EN 60332-1-2

CONSTRUCTION :

4mm 4 Core Steel Wire Armoured SWA Cable Construction

swa armoured cable 4 core

Conductors: Plain circular, compacted or shaped stranded copper or aluminium conductor (Conductor shaped: RE=circular solid, CC=compacted circular stranded, SM=sector shaped stranded)

Insulation: XLPE (cross-linked polyethylene) rated at 90°C

Color identification

1 Core : Red or Black, 2 Cores : Red, Black, 3 Cores: Red, Yellow, Blue , 4 Cores: Red, Yellow, Blue, Black, 5 Cores: Red, Yellow, Blue, Black, Green

Above 5 Cores: Black Cores with White numerals

*The above identifying can be changed as user requirement

Assembly /Inner Sheath：Two, Three or Four insulated conductors are laid-up together with non-hygroscopic fillers and the assembly is bedded with an extruded layer of PVC. In case of non-armoured cables, this layer may be omitted

Armour： Galvanized Steel Wires, single core cables shall be Aluminium wire armour, Aluminum/Steel Tapes applied helically over the bedding of multi-core cables as per IEC 60502.

Sheath：Extruded PVC Type ST2 as per IEC 60502-1 or Type 9 as BS 6346/5467.

Special type of PVC sheathing material such as Fire Retardant PVC, Anti-Termite PVC, Anti-Rodent PVC, Sunlight resistant PVC, Oil Resistant PVC are available on special request. Also, special sheathing materials such as LLDPE, MDPE, HDPE, LSZH, and CPE are available on request.

Fire Performance of Cable Sheaths

Cables can be supplied with special flame retardant PVC outer sheath to comply With the flame test requirements of IEC 60332-3-22, IEC 60332-3-23 and IEC 60332-3-24, we can also supply cables with Low Smoke Halogen Free (LSHF) material according to IEC 60502-1, BS 7211, BS 6724 or other equivalent standards.

TECHNICAL DATA :

4mm 4 Core Steel Wire Armoured SWA Cable Technical Data

Voltage: 600/1000v

Operating temperature: Maximum 90°C, minimum bending 0°C

Maximum short-circuit temperature: 250°C(max. 5s)

Minimum bending raduis: x20 cable diameter (armoured)

PARAMETER :

4mm 4 Core Steel Wire Armoured SWA Cable Parameter

Approx overall diameter (approximate size)	16.4mm
Approx weight per meter	0.54 Kg
Armour / Protection	SWA
Bedding	PVC (Polyvinyl-Chloride)
BS Number	BS5467
Colour	Black
Conductors	Plain annealed stranded copper
Core identification	4 core (Brown, Black, Grey and Blue)
Current Rating	42A
Insulation	XLPE (Cross linked polyethylene)
Operating temperature	Maximum 90C, minimum bending 0C
Sheath / Jacket	PVC (Polyvinyl-Chloride)
Standard	BS5467: Electric cables. Thermosetting insulated, armoured cables for voltages of 600/1000V and 1900/3300V
Voltage	600 / 1000V