repeat.txt For Vim version 9.1. Last change: 2024 Oct 16
VIM REFERENCE MANUAL by Bram Moolenaar
Repeating commands, Vim scripts and debugging repeating
Chapter 26 of the user manual introduces repeating usr_26.txt.
1. Single repeats single-repeat
2. Multiple repeats multi-repeat
3. Complex repeats complex-repeat
4. Using Vim scripts using-scripts
5. Using Vim packages packages
6. Creating Vim packages package-create
7. Debugging scripts debug-scripts
8. Profiling profiling
==============================================================================
1. Single repeats single-repeat
.
. Repeat last change, with count replaced with [count].
Also repeat a yank command, when the 'y' flag is
included in 'cpoptions'. Does not repeat a
command-line command.
Simple changes can be repeated with the "." command. Without a count, the
count of the last change is used. If you enter a count, it will replace the
last one. v:count and v:count1 will be set.
If the last change included a specification of a numbered register, the
register number will be incremented. See redo-register for an example how
to use this.
Note that when repeating a command that used a Visual selection, the same SIZE
of area is used, see visual-repeat.
@:
@: Repeat last command-line [count] times.
{not available when compiled without the
+cmdline_hist feature}
==============================================================================
2. Multiple repeats multi-repeat
:g :global E148
:[range]g[lobal]/{pattern}/[cmd]
Execute the Ex command [cmd] (default ":p") on the
lines within [range] where {pattern} matches.
:[range]g[lobal]!/{pattern}/[cmd]
Execute the Ex command [cmd] (default ":p") on the
lines within [range] where {pattern} does NOT match.
:v :vglobal
:[range]v[global]/{pattern}/[cmd]
Same as :g!.
Example:
:g/^Obsolete/d _
Using the underscore after :d avoids clobbering registers or the clipboard.
This also makes it faster.
Instead of the '/' which surrounds the {pattern}, you can use any other
single byte character, but not an alphabetic character, '\', '"', '|' or '!'.
This is useful if you want to include a '/' in the search pattern or
replacement string.
For the definition of a pattern, see pattern.
NOTE [cmd] may contain a range; see collapse and edit-paragraph-join for
examples.
The global commands work by first scanning through the [range] lines and
marking each line where a match occurs (for a multi-line pattern, only the
start of the match matters).
In a second scan the [cmd] is executed for each marked line, as if the cursor
was in that line. For ":v" and ":g!" the command is executed for each not
marked line. If a line is deleted its mark disappears.
The default for [range] is the whole buffer (1,$). Use "CTRL-C" to interrupt
the command. If an error message is given for a line, the command for that
line is aborted and the global command continues with the next marked or
unmarked line.
E147
When the command is used recursively, it only works on one line. Giving a
range is then not allowed. This is useful to find all lines that match a
pattern and do not match another pattern:
:g/found/v/notfound/{cmd}
This first finds all lines containing "found", but only executes {cmd} when
there is no match for "notfound".
Any Ex command can be used, see ex-cmd-index. To execute a Normal mode
command, you can use the :normal command:
:g/pat/normal {commands}
Make sure that {commands} ends with a whole command, otherwise Vim will wait
for you to type the rest of the command for each match. The screen will not
have been updated, so you don't know what you are doing. See :normal.
The undo/redo command will undo/redo the whole global command at once.
The previous context mark will only be set once (with "''" you go back to
where the cursor was before the global command).
The global command sets both the last used search pattern and the last used
substitute pattern (this is vi compatible). This makes it easy to globally
replace a string:
:g/pat/s//PAT/g
This replaces all occurrences of "pat" with "PAT". The same can be done with:
:%s/pat/PAT/g
Which is two characters shorter!
When using "global" in Ex mode, a special case is using ":visual" as a
command. This will move to a matching line, go to Normal mode to let you
execute commands there until you use Q to return to Ex mode. This will be
repeated for each matching line. While doing this you cannot use ":global".
To abort this type CTRL-C twice.
==============================================================================
3. Complex repeats complex-repeat
q recording
q{0-9a-zA-Z"} Record typed characters into register {0-9a-zA-Z"}
(uppercase to append). The 'q' command is disabled
while executing a register, and it doesn't work inside
a mapping and :normal.
Note: If the register being used for recording is also
used for y and p the result is most likely not
what is expected, because the put will paste the
recorded macro and the yank will overwrite the
recorded macro.
Note: The recording happens while you type, replaying
the register happens as if the keys come from a
mapping. This matters, for example, for undo, which
only syncs when commands were typed.
q Stops recording. (Implementation note: The 'q' that
stops recording is not stored in the register, unless
it was the result of a mapping)
@
@{0-9a-z".=*+} Execute the contents of register {0-9a-z".=*+} [count]
times. Note that register '%' (name of the current
file) and '#' (name of the alternate file) cannot be
used.
The register is executed like a mapping, that means
that the difference between 'wildchar' and 'wildcharm'
applies, and undo might not be synced in the same way.
For "@=" you are prompted to enter an expression. The
result of the expression is then executed.
See also @:.
@@ E748
@@ Repeat the previous @{0-9a-z":*} [count] times.
:@
:[addr]@{0-9a-z".=*+} Execute the contents of register {0-9a-z".=*+} as an Ex
command. First set cursor at line [addr] (default is
current line). When the last line in the register does
not have a <CR> it will be added automatically when
the 'e' flag is present in 'cpoptions'.
For ":@=" the last used expression is used. The
result of evaluating the expression is executed as an
Ex command.
Mappings are not recognized in these commands.
When the line-continuation character (\) is present
at the beginning of a line in a linewise register,
then it is combined with the previous line. This is
useful for yanking and executing parts of a Vim
script.
Future: Will execute the register for each line in the
address range.
:[addr]*{0-9a-z".=+} :star-compatible
When '*' is present in 'cpoptions' cpo-star, use
":*" in the same way as ":@". This is NOT the default
when 'nocompatible' is used. When the '*' flag is not
present in 'cpoptions', ":*" is an alias for ":'<,'>",
select the Visual area :star.
:@:
:[addr]@: Repeat last command-line. First set cursor at line
[addr] (default is current line).
:[addr]@ :@@
:[addr]@@ Repeat the previous :@{register}. First set cursor at
line [addr] (default is current line).
==============================================================================
4. Using Vim scripts using-scripts
For writing a Vim script, see chapter 41 of the user manual usr_41.txt.
:so :source load-vim-script
:so[urce] {file} Read Ex commands from {file}. These are commands that
start with a ":".
Triggers the SourcePre autocommand.
:source-range
:[range]so[urce] [++clear]
Read Ex commands from the [range] of lines in the
current buffer. When [range] is omitted read all
lines.
When sourcing commands from the current buffer, the
same script-ID <SID> is used even if the buffer is
sourced multiple times. If a buffer is sourced more
than once, then the functions in the buffer are
defined again.
To source a range of lines that doesn't start with the
:vim9script command in Vim9 script context, the
:vim9cmd modifier can be used. If you use a Visual
selection and type ":", the range in the form "'<,'>"
can come before it:
:'<,'>vim9cmd source
Otherwise the range goes after the modifier and must
have a colon prefixed, like all Vim9 ranges:
:vim9cmd :5,9source
When a range of lines in a buffer is sourced in the
Vim9 script context, the previously defined
script-local variables and functions are not cleared.
This works like the range started with the
":vim9script noclear" command. The "++clear" argument
can be used to clear the script-local variables and
functions before sourcing the script. This works like
the range started with the :vim9script command
without the "noclear" argument. See vim9-reload for
more information.
Examples:
:4,5source
:10,18source ++clear
:source!
:so[urce]! {file} Read Vim commands from {file}. These are commands
that are executed from Normal mode, like you type
them.
When used after :global, :argdo, :windo,
:bufdo, in a loop or when another command follows
the display won't be updated while executing the
commands.
Cannot be used in the sandbox.
:ru :runtime
:ru[ntime][!] [where] {file} ..
Read Ex commands from {file} in each directory given
by 'runtimepath' and/or 'packpath'. There is no error
for non-existing files.
Example:
:runtime syntax/c.vim
There can be multiple {file} arguments, separated by
spaces. Each {file} is searched for in the first
directory from 'runtimepath', then in the second
directory, etc. Use a backslash to include a space
inside {file} (although it's better not to use spaces
in file names, it causes trouble).
When [!] is included, all found files are sourced.
When it is not included only the first found file is
sourced.
When [where] is omitted only 'runtimepath' is used.
Other values:
START search under "start" in 'packpath'
OPT search under "opt" in 'packpath'
PACK search under "start" and "opt" in
'packpath'
ALL first use 'runtimepath', then search
under "start" and "opt" in 'packpath'
When {file} contains wildcards it is expanded to all
matching files. Example:
:runtime! plugin/**/*.vim
This is what Vim uses to load the plugin files when
starting up. This similar command:
:runtime plugin/**/*.vim
would source the first file only.
When 'verbose' is one or higher, there is a message
when no file could be found.
When 'verbose' is two or higher, there is a message
about each searched file.
:pa :packadd E919
:pa[ckadd][!] {name} Search for an optional plugin directory in 'packpath'
and source any plugin files found. The directory must
match:
pack/*/opt/{name}
The directory is added to 'runtimepath' if it wasn't
there yet.
If the directory pack/*/opt/{name}/after exists it is
added at the end of 'runtimepath'.
If loading packages from "pack/*/start" was skipped,
then this directory is searched first:
pack/*/start/{name}
Note that {name} is the directory name, not the name
of the .vim file. All the files matching the pattern
pack/*/opt/{name}/plugin/**/*.vim
will be sourced. This allows for using subdirectories
below "plugin", just like with plugins in
'runtimepath'.
If the filetype detection was not enabled yet (this
is usually done with a `syntax enable` or `filetype on`
command in your .vimrc file), this will also look
for "{name}/ftdetect/*.vim" files.
When the optional ! is added no plugin files or
ftdetect scripts are loaded, only the matching
directories are added to 'runtimepath'. This is
useful in your .vimrc. The plugins will then be
loaded during initialization, see load-plugins (note
that the loading order will be reversed, because each
directory is inserted before others).
Note that for ftdetect scripts to be loaded
you will need to write `filetype plugin indent on`
AFTER all packadd! commands.
Also see pack-add.
{only available when compiled with |+eval|}
:packl :packloadall
:packl[oadall][!] Load all packages in the "start" directory under each
entry in 'packpath'.
First all the directories found are added to
'runtimepath', then the plugins found in the
directories are sourced. This allows for a plugin to
depend on something of another plugin, e.g. an
"autoload" directory. See packload-two-steps for
how this can be useful.
This is normally done automatically during startup,
after loading your .vimrc file. With this command it
can be done earlier.
Packages will be loaded only once. Using
:packloadall a second time will have no effect.
When the optional ! is added this command will load
packages even when done before.
Note that when using :packloadall in the vimrc
file, the 'runtimepath' option is updated, and later
all plugins in 'runtimepath' will be loaded, which
means they are loaded again. Plugins are expected to
handle that.
An error only causes sourcing the script where it
happens to be aborted, further plugins will be loaded.
See packages.
{only available when compiled with |+eval|}
:scripte[ncoding] [encoding] :scripte :scriptencoding E167
Specify the character encoding used in the script.
The following lines will be converted from [encoding]
to the value of the 'encoding' option, if they are
different. Examples:
scriptencoding iso-8859-5
scriptencoding cp932
When [encoding] is empty, no conversion is done. This
can be used to restrict conversion to a sequence of
lines:
scriptencoding euc-jp
... lines to be converted ...
scriptencoding
... not converted ...
When conversion isn't supported by the system, there
is no error message and no conversion is done. When a
line can't be converted there is no error and the
original line is kept.
Don't use "ucs-2" or "ucs-4", scripts cannot be in
these encodings (they would contain NUL bytes).
When a sourced script starts with a BOM (Byte Order
Mark) in utf-8 format Vim will recognize it, no need
to use ":scriptencoding utf-8" then.
If you set the 'encoding' option in your .vimrc,
:scriptencoding must be placed after that. E.g.:
set encoding=utf-8
scriptencoding utf-8
:scriptv[ersion] {version} :scriptv :scriptversion
E999 E984 E1040
Specify the version of Vim for the lines that follow
in the same file. Only applies at the toplevel of
sourced scripts, not inside functions.
If {version} is higher than what the current Vim
version supports E999 will be given. You either need
to rewrite the script to make it work with an older
Vim version, or update Vim to a newer version. See
vimscript-version for what changed between versions.
:vim9s[cript] [noclear] :vim9s :vim9script
Marks a script file as containing Vim9-script
commands. Also see vim9-namespace. E1038
Must be the first command in the file. E1039
For [noclear] see vim9-reload.
Without the +eval feature this changes the syntax
for some commands.
See :vim9cmd for executing one command with Vim9
syntax and semantics.
:scr :scriptnames
:scr[iptnames] List all sourced script names, in the order they were
first encountered. The number is used for the script
ID <SID>.
For a script that was used with `import autoload` but
was not actually sourced yet an "A" is shown after the
script ID.
For a script that was referred to by one name but
after resolving symbolic links got sourced with
another name the other script is after "->". E.g.
"20->22" means script 20 was sourced as script 22.
Also see getscriptinfo().
{not available when compiled without the +eval
feature}
:scr[iptnames][!] {scriptId} :script
Edit script {scriptId}. Although ":scriptnames name"
works, using ":script name" is recommended.
When the current buffer can't be abandoned and the !
is not present, the command fails.
:fini :finish E168
:fini[sh] Stop sourcing a script. Can only be used in a Vim
script file. This is a quick way to skip the rest of
the file. If it is used after a :try but before the
matching :finally (if present), the commands
following the ":finally" up to the matching :endtry
are executed first. This process applies to all
nested ":try"s in the script. The outermost ":endtry"
then stops sourcing the script.
All commands and command sequences can be repeated by putting them in a named
register and then executing it. There are two ways to get the commands in the
register:
- Use the record command "q". You type the commands once, and while they are
being executed they are stored in a register. Easy, because you can see
what you are doing. If you make a mistake, "p"ut the register into the
file, edit the command sequence, and then delete it into the register
again. You can continue recording by appending to the register (use an
uppercase letter).
- Delete or yank the command sequence into the register.
Often used command sequences can be put under a function key with the ':map'
command.
An alternative is to put the commands in a file, and execute them with the
':source!' command. Useful for long command sequences. Can be combined with
the ':map' command to put complicated commands under a function key.
The ':source' command reads Ex commands from a file or a buffer line by line.
You will have to type any needed keyboard input. The ':source!' command reads
from a script file character by character, interpreting each character as if
you typed it.
Example: When you give the ":!ls" command you get the hit-enter prompt. If
you ':source' a file with the line "!ls" in it, you will have to type the
<Enter> yourself. But if you ':source!' a file with the line ":!ls" in it,
the next characters from that file are read until a <CR> is found. You will
not have to type <CR> yourself, unless ":!ls" was the last line in the file.
It is possible to put ':source[!]' commands in the script file, so you can
make a top-down hierarchy of script files. The ':source' command can be
nested as deep as the number of files that can be opened at one time (about
15). The ':source!' command can be nested up to 15 levels deep.
You can use the "<sfile>" string (literally, this is not a special key) inside
of the sourced file, in places where a file name is expected. It will be
replaced by the file name of the sourced file. For example, if you have a
"other.vimrc" file in the same directory as your ".vimrc" file, you can source
it from your ".vimrc" file with this command:
:source <sfile>:h/other.vimrc
In script files terminal-dependent key codes are represented by
terminal-independent two character codes. This means that they can be used
in the same way on different kinds of terminals. The first character of a
key code is 0x80 or 128, shown on the screen as "~@". The second one can be
found in the list key-notation. Any of these codes can also be entered
with CTRL-V followed by the three digit decimal code. This does NOT work for
the <t_xx> termcap codes, these can only be used in mappings.
:source_crnl W15
Win32: Files that are read with ":source" normally have <CR><NL> <EOL>s.
These always work. If you are using a file with <NL> <EOL>s (for example, a
file made on Unix), this will be recognized if 'fileformats' is not empty and
the first line does not end in a <CR>. This fails if the first line has
something like ":map <F1> :help^M", where "^M" is a <CR>. If the first line
ends in a <CR>, but following ones don't, you will get an error message,
because the <CR> from the first lines will be lost.
Mac Classic: Files that are read with ":source" normally have <CR> <EOL>s.
These always work. If you are using a file with <NL> <EOL>s (for example, a
file made on Unix), this will be recognized if 'fileformats' is not empty and
the first line does not end in a <CR>. Be careful not to use a file with <NL>
linebreaks which has a <CR> in first line.
On other systems, Vim expects ":source"ed files to end in a <NL>. These
always work. If you are using a file with <CR><NL> <EOL>s (for example, a
file made on MS-Windows), all lines will have a trailing <CR>. This may cause
problems for some commands (e.g., mappings). There is no automatic <EOL>
detection, because it's common to start with a line that defines a mapping
that ends in a <CR>, which will confuse the automaton.
line-continuation
Long lines in a ":source"d Ex command script file can be split by inserting
a line continuation symbol "\" (backslash) at the start of the next line.
There can be white space before the backslash, which is ignored.
Example: the lines
:set comments=sr:/*,mb:*,el:*/,
\:https://,
\b:#,
\:%,
\n:>,
\fb:-
are interpreted as if they were given in one line:
:set comments=sr:/*,mb:*,el:*/,:https://,b:#,:%,n:>,fb:-
All leading whitespace characters in the line before a backslash are ignored.
Note however that trailing whitespace in the line before it cannot be
inserted freely; it depends on the position where a command is split up
whether additional whitespace is allowed or not.
When a space is required it's best to put it right after the backslash. A
space at the end of a line is hard to see and may be accidentally deleted.
:syn match Comment
\ "very long regexp"
\ keepend
In Vim9 script the backslash can often be omitted, but not always.
See vim9-line-continuation.
There is a problem with the ":append" and ":insert" commands:
:1append
\asdf
.
The backslash is seen as a line-continuation symbol, thus this results in the
command:
:1appendasdf
.
To avoid this, add the 'C' flag to the 'cpoptions' option:
:set cpo+=C
:1append
\asdf
.
:set cpo-=C
Note that when the commands are inside a function, you need to add the 'C'
flag when defining the function, it is not relevant when executing it.
:set cpo+=C
:function Foo()
:1append
\asdf
.
:endfunction
:set cpo-=C
To add a comment in between the lines start with '"\ '. Notice the space
after the backslash. Example:
let array = [
"\ first entry comment
\ 'first',
"\ second entry comment
\ 'second',
\ ]
Rationale:
Most programs work with a trailing backslash to indicate line
continuation. Using this in Vim would cause incompatibility with Vi.
For example for this Vi mapping:
:map xx asdf\
Therefore the unusual leading backslash is used.
Starting a comment in a continuation line results in all following
continuation lines to be part of the comment. Since it was like this
for a long time, when making it possible to add a comment halfway a
sequence of continuation lines, it was not possible to use \", since
that was a valid continuation line. Using '"\ ' comes closest, even
though it may look a bit weird. Requiring the space after the
backslash is to make it very unlikely this is a normal comment line.
==============================================================================
5. Using Vim packages packages
A Vim package is a directory that contains one or more plugins. The
advantages over normal plugins:
- A package can be downloaded as an archive and unpacked in its own directory.
Thus the files are not mixed with files of other plugins. That makes it
easy to update and remove.
- A package can be a git, mercurial, etc. repository. That makes it really
easy to update.
- A package can contain multiple plugins that depend on each other.
- A package can contain plugins that are automatically loaded on startup and
ones that are only loaded when needed with :packadd.
Using a package and loading automatically
Let's assume your Vim files are in the "~/.vim" directory and you want to add a
package from a zip archive "/tmp/foopack.zip":
% mkdir -p ~/.vim/pack/foo
% cd ~/.vim/pack/foo
% unzip /tmp/foopack.zip
The directory name "foo" is arbitrary, you can pick anything you like.
You would now have these files under ~/.vim:
pack/foo/README.txt
pack/foo/start/foobar/plugin/foo.vim
pack/foo/start/foobar/syntax/some.vim
pack/foo/opt/foodebug/plugin/debugger.vim
When Vim starts up, after processing your .vimrc, it scans all directories in
'packpath' for plugins under the "pack/*/start" directory. First all those
directories are added to 'runtimepath'. Then all the plugins are loaded.
See packload-two-steps for how these two steps can be useful.
To allow for calling into package functionality while parsing your .vimrc,
:colorscheme and autoload will both automatically search under 'packpath'
as well in addition to 'runtimepath'. See the documentation for each for
details.
In the example Vim will find "pack/foo/start/foobar/plugin/foo.vim" and adds
"~/.vim/pack/foo/start/foobar" to 'runtimepath'.
If the "foobar" plugin kicks in and sets the 'filetype' to "some", Vim will
find the syntax/some.vim file, because its directory is in 'runtimepath'.
Vim will also load ftdetect files, if there are any.
Note that the files under "pack/foo/opt" are not loaded automatically, only the
ones under "pack/foo/start". See pack-add below for how the "opt" directory
is used.
Loading packages automatically will not happen if loading plugins is disabled,
see load-plugins.
To load packages earlier, so that 'runtimepath' gets updated:
:packloadall
This also works when loading plugins is disabled. The automatic loading will
only happen once.
If the package has an "after" directory, that directory is added to the end of
'runtimepath', so that anything there will be loaded later.
Using a single plugin and loading it automatically
If you don't have a package but a single plugin, you need to create the extra
directory level:
% mkdir -p ~/.vim/pack/foo/start/foobar
% cd ~/.vim/pack/foo/start/foobar
% unzip /tmp/someplugin.zip
You would now have these files:
pack/foo/start/foobar/plugin/foo.vim
pack/foo/start/foobar/syntax/some.vim
From here it works like above.
Optional plugins
pack-add
To load an optional plugin from a pack use the :packadd command:
:packadd foodebug
This searches for "pack/*/opt/foodebug" in 'packpath' and will find
~/.vim/pack/foo/opt/foodebug/plugin/debugger.vim and source it.
This could be done if some conditions are met. For example, depending on
whether Vim supports a feature or a dependency is missing.
You can also load an optional plugin at startup, by putting this command in
your .vimrc:
:packadd! foodebug
The extra "!" is so that the plugin isn't loaded if Vim was started with
--noplugin.
It is perfectly normal for a package to only have files in the "opt"
directory. You then need to load each plugin when you want to use it.
Where to put what
Since color schemes, loaded with :colorscheme, are found below
"pack/*/start" and "pack/*/opt", you could put them anywhere. We recommend
you put them below "pack/*/opt", for example
".vim/pack/mycolors/opt/dark/colors/very_dark.vim".
Filetype plugins should go under "pack/*/start", so that they are always
found. Unless you have more than one plugin for a file type and want to
select which one to load with :packadd. E.g. depending on the compiler
version:
if foo_compiler_version > 34
packadd foo_new
else
packadd foo_old
endif
The "after" directory is most likely not useful in a package. It's not
disallowed though.
==============================================================================
6. Creating Vim packages package-create
This assumes you write one or more plugins that you distribute as a package.
If you have two unrelated plugins you would use two packages, so that Vim
users can choose what they include or not. Or you can decide to use one
package with optional plugins, and tell the user to add the preferred ones with
:packadd.
Decide how you want to distribute the package. You can create an archive or
you could use a repository. An archive can be used by more users, but is a
bit harder to update to a new version. A repository can usually be kept
up-to-date easily, but it requires a program like "git" to be available.
You can do both, github can automatically create an archive for a release.
Your directory layout would be like this:
start/foobar/plugin/foo.vim " always loaded, defines commands
start/foobar/plugin/bar.vim " always loaded, defines commands
start/foobar/autoload/foo.vim " loaded when foo command used
start/foobar/doc/foo.txt " help for foo.vim
start/foobar/doc/tags " help tags
start/foobar/lang/<lang_id>/LC_MESSAGES/foobar.mo
" messages for the plugin in the
" <lang_id> language. These files are
" optional.
opt/fooextra/plugin/extra.vim " optional plugin, defines commands
opt/fooextra/autoload/extra.vim " loaded when extra command used
opt/fooextra/doc/extra.txt " help for extra.vim
opt/fooextra/doc/tags " help tags
This allows for the user to do:
mkdir ~/.vim/pack
cd ~/.vim/pack
git clone https://github.com/you/foobar.git myfoobar
Here "myfoobar" is a name that the user can choose, the only condition is that
it differs from other packages.
In your documentation you explain what the plugins do, and tell the user how
to load the optional plugin:
:packadd! fooextra
You could add this packadd command in one of your plugins, to be executed when
the optional plugin is needed.
package-doc package-documentation
Run the :helptags command to generate the doc/tags file. Including this
generated file in the package means that the user can drop the package in the
pack directory and the help command works right away. Don't forget to re-run
the command after changing the plugin help:
:helptags path/start/foobar/doc
:helptags path/opt/fooextra/doc
package-translation
In order for a plugin to display translated messages, a few steps are
required.
The author of the plugin who likes to translate messages must define the name
of the package and the location of the directory where the translations can be
found using the bindtextdomain() function:
:call bindtextdomain("foobar",
\ fnamemodify(expand("<script>"), ':p:h') .. '/../lang/')
Where:
"foobar" is the unique package identifier by which the gettext()
function will later search for translation strings for this
plugin.
"lang/" is the relative or absolute path to the directory structure
where the translation file is located.
The directory structure where the message translation files should be placed
is (from the top-level directory of the package):
"lang/<lang_id>/LC_MESSAGES". For the format of <lang_id> see multi-lang.
This function needs to be called only once during the initialization of the
plugin.
Once this is done, the gettext() function can be used to retrieve translated
messages:
:echo gettext("Hello", "foobar")
Where:
"Hello" the message "Hello" to be translated into the user's language
:lang
"foobar" the package identifier, which was previously defined using the
bindtextdomain() function.
After that you need to create a template file for translation - POT-file.
To do this, execute the following commands (using the Vim repository):
cd ~/forkvim/src/po
make -f Makefile "PLUGPACKAGE={package}" \
"PO_PLUG_INPUTLIST={path/to/scripts-that-need-translations.vim}" \
["POT_PLUGPACKAGE_PATH={path/where/to/write/{package}.pot}" \]
["VIMPROG={path/to/vim} \]
{package}.pot
Where:
PLUGPACKAGE A variable containing the name of the package that we
specified in the bindtextdomain() and
gettext() functions, for example, "foobar".
PO_PLUG_INPUTLIST A variable containing scripts that have strings
to translate, i.e. where we specified the gettext()
function. Scripts are specified with an absolute
or relative path. Example: start/foobar/plugin/bar.vim
use blanks to separate scripts.
POT_PLUGPACKAGE_PATH A variable containing the directory where the prepared
POT file will be saved. This is not a required variable,
if no directory is specified, then the POT file will
be placed in the "src/po" directory.
VIMPROG A variable containing a directory with a working Vim.
If the Vim editor is already built and installed, and
is contained in the $PATH environment variable,
then you can specify just the name of the vim
executable.
{package}.pot This is the Target. It is specified as the name of
the package, for example, "foobar" with the addition
of the .pot extension.
Once a POT file is created, its contents are copied into separate PO files for
each language for which the translation will be prepared.
When the translation is finished, it is necessary to convert the PO files into
binary MO-files format and place these MO-files into the "lang/" directory, the
structure of which we created earlier.
To do this, run the following commands:
cd ~/forkvim/src/po
make -f Makefile "PLUGPACKAGE={package}" \
"PO_PLUGPACKAGE={path/to/{lang}.po}" \
["MO_PLUGPACKAGE_PATH={path/to/lang/<lang_id>/LC_MESSAGES}" \]
{package}.mo
Where:
PLUGPACKAGE A variable containing the name of the package that we
specified in the bindtextdomain() and gettext()
functions, for example, "foobar".
PO_PLUGPACKAGE A variable containing a PO file. The file is specified
with an absolute or relative path. For example,
"~/myproject/translate/en.po"
MO_PLUGPACKAGE_PATH A variable containing the structure of the "lang/"
directory, where the file with translations will be
placed, for example, "foobar.mo". This is not
a required variable, if the directory is not specified,
the MO file will be saved in the "src/po" directory.
{package}.mo This is the Target. It is specified as the name of
the package, for example, "foobar" with the addition
of the .mo extension.
package-translate_example
Let's show it all on some concrete example and translate the
"ftplugin/aap.vim" file into Russian and German.
First, let's prepare the "aap.vim" file, specifying bindtextdomain() and
gettext() function calls in it.
" Only do this when not done yet for this buffer
if exists("b:did_ftplugin")
finish
endif
" Don't load another plugin for this buffer
let b:did_ftplugin = 1
call bindtextdomain("aap", fnamemodify(expand("<script>"), ':p:h') .. '/../lang/')
" Reset 'formatoptions', 'comments', 'commentstring' and 'expandtab' to undo
" this plugin.
let b:undo_ftplugin = "setl fo< com< cms< et<"
" Set 'formatoptions' to break comment lines but not other lines,
" and insert the comment leader when hitting <CR> or using "o".
setlocal fo-=t fo+=croql
" Set 'comments' to format dashed lists in comments.
setlocal comments=s:#\ -,m:#\ \ ,e:#,n:#,fb:-
setlocal commentstring=#\ %s
" Expand tabs to spaces to avoid trouble.
setlocal expandtab
if (has("gui_win32") || has("gui_gtk")) && !exists("b:browsefilter")
let b:browsefilter = gettext("Aap Recipe Files (*.aap)\t*.aap\n", "aap")
if has("win32")
let b:browsefilter ..= gettext("All Files (*.*)\t*\n", "aap")
else
let b:browsefilter ..= gettext("All Files (*)\t*\n", "aap")
endif
let b:undo_ftplugin ..= " | unlet! b:browsefilter"
endif
Now let's create a POT file for it (example uses Windows paths):
cd /d f:\forkvim\src\po
(the following command must be entered in one line, here it is separated for example)
nmake.exe -f Make_mvc.mak "PLUGPACKAGE=aap"
"PO_PLUG_INPUTLIST=d:\Programs\vim\vim91\ftplugin\aap.vim"
"POT_PLUGPACKAGE_PATH=e:\project\translate\plugins"
"VIMPROG=d:\Programs\vim\vim91\vim.exe"
aap.pot
After the POT file of our package is created, go to the directory where we
saved it and perform the translation.
cd /d e:\project\translate\plugins
copy aap.pot ru.po
copy aap.pot de.po
We have prepared a PO file with a translation into Russian:
# Test plugins translate
#
msgid ""
msgstr ""
"Project-Id-Version: aap\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-06-23 14:58+0300\n"
"PO-Revision-Date: 2024-06-23 14:58+0300\n"
"Last-Translator: Restorer\n"
"Language-Team: RuVim\n"
"Language: ru\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#: ../../runtime/ftplugin/aap.vim:32
msgid "Aap Recipe Files (*.aap)\t*.aap\n"
msgstr "Файлы инструкций Aap (*.aap)\t*.aap\n"
#: ../../runtime/ftplugin/aap.vim:34
msgid "All Files (*.*)\t*\n"
msgstr "Все файлы (*.*)\t*\n"
#: ../../runtime/ftplugin/aap.vim:36
msgid "All Files (*)\t*\n"
msgstr "Все файлы (*)\t*\n"
And the PO file in German:
# Test plugins translate
#
msgid ""
msgstr ""
"Project-Id-Version: aap\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-06-23 14:58+0300\n"
"PO-Revision-Date: 2024-06-24 13:11+0300\n"
"Last-Translator: Restorer\n"
"Language-Team: German\n"
"Language: de\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#: ../../runtime/ftplugin/aap.vim:32
msgid "Aap Recipe Files (*.aap)\t*.aap\n"
msgstr "Aap-Rezeptdateien (*.aap)\t*.aap\n"
#: ../../runtime/ftplugin/aap.vim:34
msgid "All Files (*.*)\t*\n"
msgstr "Alle Dateien (*.*)\t*.*\n"
#: ../../runtime/ftplugin/aap.vim:36
msgid "All Files (*)\t*\n"
msgstr "Alle Dateien (*)\t*\n"
Now convert these files into MO files so that gettext() can display message
translations. Note that since this is not a specialized plugin package, we
will put the MO files in the "lang/" directory of the Vim editor.
Type the following commands:
cd /d f:\forkvim\src\po
(the following command must be entered in one line, here it is separated for example)
For Russian:
nmake.exe -f Make_mvc.mak "PLUGPACKAGE=aap"
"PO_PLUGPACKAGE=e:\project\translate\plugins\ru.po"
"MO_PLUGPACKAGE_PATH=d:\Programs\vim\vim91\lang\ru\LC_MESSAGES"
aap.mo
For German:
nmake.exe -f Make_mvc.mak "PLUGPACKAGE=aap"
"PO_PLUGPACKAGE=e:\project\translate\plugins\de.po"
"MO_PLUGPACKAGE_PATH=d:\Programs\vim\vim91\lang\de\LC_MESSAGES"
aap.mo
That's it, the translations are ready and you can see the plugin's messages
in your native language.
Let's also try to translate a plugin package. For example, when a package
contains several scripts containing strings that need to be translated.
For example, let's translate the "netrw" package into Japanese.
For this example, we will translate only a few lines from this package.
Let's prepare the scripts where we need to translate the message strings.
The file "autoload\netrw.vim":
" Load Once:
if &cp || exists("g:loaded_netrw")
finish
endif
call bindtextdomain("netrw", fnamemodify(expand("<script>"), ':p:h') .. '/../lang/')
" Check that vim has patches that netrw requires.
" Patches needed for v7.4: 1557, and 213.
" (netrw will benefit from vim's having patch#656, too)
let s:needspatches=[1557,213]
if exists("s:needspatches")
for ptch in s:needspatches
if v:version < 704 || (v:version == 704 && !has("patch".ptch))
if !exists("s:needpatch{ptch}")
unsilent echomsg gettext("***sorry*** this version of netrw requires vim v7.4 with patch#", "netrw") .. ptch
endif
let s:needpatch{ptch}= 1
finish
endif
endfor
endif
The file "autoload\netrwSettings.vim":
" Load Once:
if exists("g:loaded_netrwSettings") || &cp
finish
endif
call bindtextdomain("netrw", fnamemodify(expand("<script>"), ':p:h') .. '/../lang/')
let g:loaded_netrwSettings = "v18"
if v:version < 700
echohl WarningMsg
echo gettext("***warning*** this version of netrwSettings needs vim 7.0", "netrw")
echohl Normal
finish
endif
Now we will prepare a POT file for further translation of messages.
Execute the following commands:
cd ~/forkvim/src/po
make -f Makefile "VIMPROG=/usr/local/bin/vim" "PLUGPACKAGE=netrw" \
"POT_PLUGPACKAGE_PATH=~/project/translate/plugins" \
"PO_PLUG_INPUTLIST=../../runtime/autoload/netrw.vim
../../runtime/autoload/netrwSettings.vim" \
netrw.pot
Go to the directory with the POT file and make the translation:
cd ~/project/translate/plugins
cp ./netrw.pot ja.po
When we have the translation ready in the "ja.po" file:
# Test plugins translate
#
msgid ""
msgstr ""
"Project-Id-Version: netrw\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-06-23 17:14+0300\n"
"PO-Revision-Date: 2024-06-23 17:14+0300\n"
"Last-Translator: Restorer\n"
"Language-Team: Japanese\n"
"Language: ja\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#: ../../runtime/autoload/netrw.vim:51
msgid "***sorry*** this version of netrw requires vim v7.4 with patch#"
msgstr ""
"***申し訳ありません***このバージョンのnetrwには、パッチ付きのvim v7.4が必要です#"
#: ../../runtime/autoload/netrwSettings.vim:28
msgid "***warning*** this version of netrwSettings needs vim 7.0"
msgstr "***警告***このバージョンのnetrwSettingsにはvim7.0が必要です"
Convert ja.po to a MO file:
cd ~/forkvim/src/po
make -f Makefile "PLUGPACKAGE=netrw" \
"PO_PLUGPACKAGE=~/project/translate/plugins/ja.po" \
"MO_PLUGPACKAGE_PATH=/usr/local/share/vim/vim91/lang/ja/LC_MESSAGES" \
netrw.mo
Executing those steps will allow you to get translation of any third-party
plug-in packages.
Dependencies between plugins
packload-two-steps
Suppose you have two plugins that depend on the same functionality. You can
put the common functionality in an autoload directory, so that it will be
found automatically. Your package would have these files:
pack/foo/start/one/plugin/one.vim
call foolib#getit()
pack/foo/start/two/plugin/two.vim
call foolib#getit()
pack/foo/start/lib/autoload/foolib.vim
func foolib#getit()
This works, because loading packages will first add all found directories to
'runtimepath' before sourcing the plugins.
==============================================================================
7. Debugging scripts debug-scripts
Besides the obvious messages that you can add to your scripts to find out what
they are doing, Vim offers a debug mode. This allows you to step through a
sourced file or user function and set breakpoints.
NOTE: The debugging mode is far from perfect. Debugging will have side
effects on how Vim works. You cannot use it to debug everything. For
example, the display is messed up by the debugging messages.
An alternative to debug mode is setting the 'verbose' option. With a bigger
number it will give more verbose messages about what Vim is doing.
STARTING DEBUG MODE debug-mode
To enter debugging mode use one of these methods:
1. Start Vim with the -D argument:
vim -D file.txt
Debugging will start as soon as the first vimrc file is sourced. This is
useful to find out what is happening when Vim is starting up. A side
effect is that Vim will switch the terminal mode before initialisations
have finished, with unpredictable results.
For a GUI-only version (Windows, Macintosh) the debugging will start as
soon as the GUI window has been opened. To make this happen early, add a
":gui" command in the vimrc file.
:debug
2. Run a command with ":debug" prepended. Debugging will only be done while
this command executes. Useful for debugging a specific script or user
function. And for scripts and functions used by autocommands. Example:
:debug edit test.txt.gz
3. Set a breakpoint in a sourced file or user function. You could do this in
the command line:
vim -c "breakadd file */explorer.vim" .
This will run Vim and stop in the first line of the "explorer.vim" script.
Breakpoints can also be set while in debugging mode.
In debugging mode every executed command is displayed before it is executed.
Comment lines, empty lines and lines that are not executed are skipped. When
a line contains two commands, separated by "|", each command will be displayed
separately.
DEBUG MODE
Once in debugging mode, the usual Ex commands can be used. For example, to
inspect the value of a variable:
echo idx
When inside a user function, this will print the value of the local variable
"idx". Prepend "g:" to get the value of a global variable:
echo g:idx
All commands are executed in the context of the current function or script.
You can also set options, for example setting or resetting 'verbose' will show
what happens, but you might want to set it just before executing the lines you
are interested in:
:set verbose=20
Commands that require updating the screen should be avoided, because their
effect won't be noticed until after leaving debug mode. For example:
:help
won't be very helpful.
There is a separate command-line history for debug mode.
NOTE: In Vim9 script, if a command is written at the script level and
continues on the next line, not using the old way with a backslash for line
continuation, only the first line is printed before the debugging prompt.
The line number for a function line is relative to the start of the function.
If you have trouble figuring out where you are, edit the file that defines
the function in another Vim, search for the start of the function and do
"99j". Replace "99" with the line number.
Additionally, these commands can be used:
>cont
cont Continue execution until the next breakpoint is hit.
>quit
quit Abort execution. This is like using CTRL-C, some
things might still be executed, doesn't abort
everything. Still stops at the next breakpoint.
>next
next Execute the command and come back to debug mode when
it's finished. This steps over user function calls
and sourced files.
>step
step Execute the command and come back to debug mode for
the next command. This steps into called user
functions and sourced files.
>interrupt
interrupt This is like using CTRL-C, but unlike ">quit" comes
back to debug mode for the next command that is
executed. Useful for testing :finally and :catch
on interrupt exceptions.
>finish
finish Finish the current script or user function and come
back to debug mode for the command after the one that
sourced or called it.
>bt
>backtrace
>where
backtrace Show the call stacktrace for current debugging session.
bt
where
>frame
frame N Goes to N backtrace level. + and - signs make movement
relative. E.g., ":frame +3" goes three frames up.
>up
up Goes one level up from call stacktrace.
>down
down Goes one level down from call stacktrace.
About the additional commands in debug mode:
- There is no command-line completion for them, you get the completion for the
normal Ex commands only.
- You can shorten them, up to a single character, unless more than one command
starts with the same letter. "f" stands for "finish", use "fr" for "frame".
- Hitting <CR> will repeat the previous one. When doing another command, this
is reset (because it's not clear what you want to repeat).
- When you want to use the Ex command with the same name, prepend a colon:
":cont", ":next", ":finish" (or shorter).
vim9-debug
When debugging a compiled :def function, "step" will stop before every
executed line, not every single instruction. Thus it works mostly like a not
compiled function. Access to local variables is limited you can use:
echo varname
But not much else.
When executing a command that is not a specific bytecode instruction but
executed like a normal Ex command, "step" will stop once in the compiled
context, where local variables can be inspected, and once just before
executing the command.
In a :def function variables that haven't been declared yet cannot be
inspected. Variables that have been declared can be inspected, also when the
block they were declared in has finished. In commands this would not be
possible, thus is slightly misleading (but can be useful).
The backtrace shows the hierarchy of function calls, e.g.:
>bt
3 function One[3]
2 Two[3]
->1 Three[3]
0 Four
line 1: let four = 4
The "->" points to the current frame. Use "up", "down" and "frame N" to
select another frame.
In the current frame you can evaluate the local function variables. There is
no way to see the command at the current line yet.
DEFINING BREAKPOINTS
:breaka :breakadd
:breaka[dd] func [lnum] {name}
Set a breakpoint in a function. Example:
:breakadd func Explore
Doesn't check for a valid function name, thus the breakpoint
can be set before the function is defined.
:breaka[dd] file [lnum] {name}
Set a breakpoint in a sourced file. Example:
:breakadd file 43 .vimrc
:breaka[dd] here
Set a breakpoint in the current line of the current file.
Like doing:
:breakadd file <cursor-line> <current-file>
Note that this only works for commands that are executed when
sourcing the file, not for a function defined in that file.
:breaka[dd] expr {expression}
Sets a breakpoint, that will break whenever the {expression}
evaluates to a different value. Example:
:breakadd expr g:lnum
Will break, whenever the global variable lnum changes.
Errors in evaluation are suppressed, you can use the name of a
variable that does not exist yet. This also means you will
not notice anything if the expression has a mistake.
Note if you watch a script-variable this will break
when switching scripts, since the script variable is only
valid in the script where it has been defined and if that
script is called from several other scripts, this will stop
whenever that particular variable will become visible or
inaccessible again.
The [lnum] is the line number of the breakpoint. Vim will stop at or after
this line. When omitted line 1 is used.
:debug-name
{name} is a pattern that is matched with the file or function name. The
pattern is like what is used for autocommands. There must be a full match (as
if the pattern starts with "^" and ends in "$"). A "*" matches any sequence
of characters. 'ignorecase' is not used, but "\c" can be used in the pattern
to ignore case /\c. Don't include the () for the function name!
The match for sourced scripts is done against the full file name. If no path
is specified the current directory is used. Examples:
breakadd file explorer.vim
matches "explorer.vim" in the current directory.
breakadd file *explorer.vim
matches ".../plugin/explorer.vim", ".../plugin/iexplorer.vim", etc.
breakadd file */explorer.vim
matches ".../plugin/explorer.vim" and "explorer.vim" in any other directory.
The match for functions is done against the name as it's shown in the output
of ":function". However, for local functions the script-specific prefix such
as "<SNR>99_" is ignored to make it easier to match script-local functions
without knowing the ID of the script.
Note that functions are first loaded and later executed. When they are loaded
the "file" breakpoints are checked, when they are executed the "func"
breakpoints.
DELETING BREAKPOINTS
:breakd :breakdel E161
:breakd[el] {nr}
Delete breakpoint {nr}. Use :breaklist to see the number of
each breakpoint.
:breakd[el] *
Delete all breakpoints.
:breakd[el] func [lnum] {name}
Delete a breakpoint in a function.
:breakd[el] file [lnum] {name}
Delete a breakpoint in a sourced file.
:breakd[el] here
Delete a breakpoint at the current line of the current file.
When [lnum] is omitted, the first breakpoint in the function or file is
deleted.
The {name} must be exactly the same as what was typed for the ":breakadd"
command. "explorer", "*explorer.vim" and "*explorer*" are different.
LISTING BREAKPOINTS
:breakl :breaklist
:breakl[ist]
List all breakpoints.
OBSCURE
:debugg :debuggreedy
:debugg[reedy]
Read debug mode commands from the normal input stream, instead
of getting them directly from the user. Only useful for test
scripts. Example:
echo 'q^Mq' | vim -e -s -c debuggreedy -c 'breakadd file script.vim' -S script.vim
:0debugg[reedy]
Undo ":debuggreedy": get debug mode commands directly from the
user, don't use typeahead for debug commands.
==============================================================================
8. Profiling profile profiling
Profiling means that Vim measures the time that is spent on executing
functions and/or scripts. The +profile feature is required for this.
It is included when Vim was compiled with "huge" features.
You can also use the reltime() function to measure time. This only requires
the +reltime feature, which is present in more builds.
For profiling syntax highlighting see :syntime.
For example, to profile the one_script.vim script file:
:profile start /tmp/one_script_profile
:profile file one_script.vim
:source one_script.vim
:exit
:prof[ile] start {fname} :prof :profile E750
Start profiling, write the output in {fname} upon exit or when
a `:profile stop` or `:profile dump` command is invoked.
"~/" and environment variables in {fname} will be expanded.
If {fname} already exists it will be silently overwritten.
The variable v:profiling is set to one.
:prof[ile] stop
Write the collected profiling information to the logfile and
stop profiling. You can use the `:profile start` command to
clear the profiling statistics and start profiling again.
:prof[ile] pause
Stop profiling until the next `:profile continue` command.
Can be used when doing something that should not be counted
(e.g., an external command). Does not nest.
:prof[ile] continue
Continue profiling after `:profile pause`.
:prof[ile] func {pattern}
Profile function that matches the pattern {pattern}.
See :debug-name for how {pattern} is used.
:prof[ile][!] file {pattern}
Profile script file that matches the pattern {pattern}.
See :debug-name for how {pattern} is used.
This only profiles the script itself, not the functions
defined in it.
When the [!] is added then all functions defined in the script
will also be profiled.
Note that profiling only starts when the script is loaded
after this command. A :profile command in the script itself
won't work.
:prof[ile] dump
Write the current state of profiling to the logfile
immediately. After running this command, Vim continues to
collect the profiling statistics.
:profd[el] ... :profd :profdel
Stop profiling for the arguments specified. See :breakdel
for the arguments. Examples:
profdel func MyFunc
profdel file MyScript.vim
profdel here
You must always start with a ":profile start fname" command. The resulting
file is written when Vim exits. For example, to profile one specific
function:
profile start /tmp/vimprofile
profile func MyFunc
Here is an example of the output, with line
numbers prepended for the explanation:
1 FUNCTION Test2()
2 Called 1 time
3 Total time: 0.155251
4 Self time: 0.002006
5
6 count total (s) self (s)
7 9 0.000096 for i in range(8)
8 8 0.153655 0.000410 call Test3()
9 8 0.000070 endfor
10 " Ask a question
11 1 0.001341 echo input("give me an answer: ")
The header (lines 1-4) gives the time for the whole function. The "Total"
time is the time passed while the function was executing. The "Self" time is
the "Total" time reduced by time spent in:
- other user defined functions
- sourced scripts
- executed autocommands
- external (shell) commands
Lines 7-11 show the time spent in each executed line. Lines that are not
executed do not count. Thus a comment line is never counted.
The Count column shows how many times a line was executed. Note that the
"for" command in line 7 is executed one more time as the following lines.
That is because the line is also executed to detect the end of the loop.
The time Vim spends waiting for user input isn't counted at all. Thus how
long you take to respond to the input() prompt is irrelevant.
Profiling should give a good indication of where time is spent, but keep in
mind there are various things that may clobber the results:
- The accuracy of the time measured depends on the gettimeofday(), or
clock_gettime() if available, system function. The accuracy ranges from
1/100 second to nanoseconds. With clock_gettime() the times are displayed in
nanoseconds, otherwise microseconds. You can use has("prof_nsec").
- Real elapsed time is measured, if other processes are busy they may cause
delays at unpredictable moments. You may want to run the profiling several
times and use the lowest results.
- If you have several commands in one line you only get one time. Split the
line to see the time for the individual commands.
- The time of the lines added up is mostly less than the time of the whole
function. There is some overhead in between.
- Functions that are deleted before Vim exits will not produce profiling
information. You can check the v:profiling variable if needed:
:if !v:profiling
: delfunc MyFunc
:endif
- Profiling may give weird results on multi-processor systems, when sleep
mode kicks in or the processor frequency is reduced to save power.
- The "self" time is wrong when a function is used recursively.
vim:tw=78:ts=8:noet:ft=help:norl: