Comments ±

Anything between the sequence $-- and the end of the line will be treated as a comment and omitted from the output.

Delimiters ±

To mark variables and control structures in the template, either $…$ or ${…} may be used as delimiters. The styles may also be mixed in the same template, but the opening and closing delimiter must match in each case. The opening delimiter may be followed by one or more spaces or tabs, which will be ignored. The closing delimiter may be preceded by one or more spaces or tabs, which will be ignored.

To include a literal $ in the document, use $$.

Interpolated variables ±

A slot for an interpolated variable is a variable name surrounded by matched delimiters. Variable names must begin with a letter and can contain letters, numbers, _, -, and .. The keywords it, if, else, endif, for, sep, and endfor may not be used as variable names. Examples:

$foo$
$foo.bar.baz$
$foo_bar.baz-bim$
$ foo $
${foo}
${foo.bar.baz}
${foo_bar.baz-bim}
${ foo }

Variable names with periods are used to get at structured variable values. So, for example, employee.salary will return the value of the salary field of the object that is the value of the employee field.

• If the value of the variable is a simple value, it will be rendered verbatim. (Note that no escaping is done; the assumption is that the calling program will escape the strings appropriately for the output format.)
• If the value is a list, the values will be concatenated.
• If the value is a map, the string true will be rendered.
• Every other value will be rendered as the empty string.

Conditionals ±

A conditional begins with if(variable) (enclosed in matched delimiters) and ends with endif (enclosed in matched delimiters). It may optionally contain an else (enclosed in matched delimiters). The if section is used if variable has a true value, otherwise the else section is used (if present). The following values count as true:

• any map
• any array containing at least one true value
• any nonempty string
• boolean True

Note that in YAML metadata (and metadata specified on the command line using -M/--metadata), unquoted true and false will be interpreted as Boolean values. But a variable specified on the command line using -V/--variable will always be given a string value. Hence a conditional if(foo) will be triggered if you use -V foo=false, but not if you use -M foo=false.

Examples:

$if(foo)$bar$endif$

$if(foo)$
  $foo$
$endif$

$if(foo)$
part one
$else$
part two
$endif$

${if(foo)}bar${endif}

${if(foo)}
  ${foo}
${endif}

${if(foo)}
${ foo.bar }
${else}
no foo!
${endif}

The keyword elseif may be used to simplify complex nested conditionals:

$if(foo)$
XXX
$elseif(bar)$
YYY
$else$
ZZZ
$endif$

For loops ±

A for loop begins with for(variable) (enclosed in matched delimiters) and ends with endfor (enclosed in matched delimiters).

• If variable is an array, the material inside the loop will be evaluated repeatedly, with variable being set to each value of the array in turn, and concatenated.
• If variable is a map, the material inside will be set to the map.
• If the value of the associated variable is not an array or a map, a single iteration will be performed on its value.

Examples:

$for(foo)$$foo$$sep$, $endfor$

$for(foo)$
  - $foo.last$, $foo.first$
$endfor$

${ for(foo.bar) }
  - ${ foo.bar.last }, ${ foo.bar.first }
${ endfor }

$for(mymap)$
$it.name$: $it.office$
$endfor$

You may optionally specify a separator between consecutive values using sep (enclosed in matched delimiters). The material between sep and the endfor is the separator.

${ for(foo) }${ foo }${ sep }, ${ endfor }

Instead of using variable inside the loop, the special anaphoric keyword it may be used.

${ for(foo.bar) }
  - ${ it.last }, ${ it.first }
${ endfor }

Partials ±

Partials (subtemplates stored in different files) may be included by using the name of the partial, followed by (), for example:

${ styles() }

Partials will be sought in the directory containing the main template. The file name will be assumed to have the same extension as the main template if it lacks an extension. When calling the partial, the full name including file extension can also be used:

${ styles.html() }

(If a partial is not found in the directory of the template and the template path is given as a relative path, it will also be sought in the templates subdirectory of the user data directory.)

Partials may optionally be applied to variables using a colon:

${ date:fancy() }

${ articles:bibentry() }

If articles is an array, this will iterate over its values, applying the partial bibentry() to each one. So the second example above is equivalent to

${ for(articles) }
${ it:bibentry() }
${ endfor }

Note that the anaphoric keyword it must be used when iterating over partials. In the above examples, the bibentry partial should contain it.title (and so on) instead of articles.title.

Final newlines are omitted from included partials.

Partials may include other partials.

A separator between values of an array may be specified in square brackets, immediately after the variable name or partial:

${months[, ]}$

${articles:bibentry()[; ]$

The separator in this case is literal and (unlike with sep in an explicit for loop) cannot contain interpolated variables or other template directives.

Nesting ±

To ensure that content is “nested,” that is, subsequent lines indented, use the ^ directive:

$item.number$  $^$$item.description$ ($item.price$)

In this example, if item.description has multiple lines, they will all be indented to line up with the first line:

00123  A fine bottle of 18-year old
       Oban whiskey. ($148)

To nest multiple lines to the same level, align them with the ^ directive in the template. For example:

$item.number$  $^$$item.description$ ($item.price$)
               (Available til $item.sellby$.)

will produce

00123  A fine bottle of 18-year old
       Oban whiskey. ($148)
       (Available til March 30, 2020.)

If a variable occurs by itself on a line, preceded by whitespace and not followed by further text or directives on the same line, and the variable’s value contains multiple lines, it will be nested automatically.

Breakable spaces ±

Normally, spaces in the template itself (as opposed to values of the interpolated variables) are not breakable, but they can be made breakable in part of the template by using the ~ keyword (ended with another ~).

$~$This long line may break if the document is rendered
with a short line length.$~$

Pipes ±

A pipe transforms the value of a variable or partial. Pipes are specified using a slash (/) between the variable name (or partial) and the pipe name. Example:

$for(name)$
$name/uppercase$
$endfor$

$for(metadata/pairs)$
- $it.key$: $it.value$
$endfor$

$employee:name()/uppercase$

Pipes may be chained:

$for(employees/pairs)$
$it.key/alpha/uppercase$. $it.name$
$endfor$

Some pipes take parameters:

|----------------------|------------|
$for(employee)$
$it.name.first/uppercase/left 20 "| "$$it.name.salary/right 10 " | " " |"$
$endfor$
|----------------------|------------|

Currently the following pipes are predefined:

• pairs: Converts a map or array to an array of maps, each with key and value fields. If the original value was an array, the key will be the array index, starting with 1.

• uppercase: Converts text to uppercase.

• lowercase: Converts text to lowercase.

• length: Returns the length of the value: number of characters for a textual value, number of elements for a map or array.

• reverse: Reverses a textual value or array, and has no effect on other values.

• first: Returns the first value of an array, if applied to a non-empty array; otherwise returns the original value.

• last: Returns the last value of an array, if applied to a non-empty array; otherwise returns the original value.

• rest: Returns all but the first value of an array, if applied to a non-empty array; otherwise returns the original value.

• allbutlast: Returns all but the last value of an array, if applied to a non-empty array; otherwise returns the original value.

• chomp: Removes trailing newlines (and breakable space).

• nowrap: Disables line wrapping on breakable spaces.

• alpha: Converts textual values that can be read as an integer into lowercase alphabetic characters a..z (mod 26). This can be used to get lettered enumeration from array indices. To get uppercase letters, chain with uppercase.

• roman: Converts textual values that can be read as an integer into lowercase roman numerals. This can be used to get lettered enumeration from array indices. To get uppercase roman, chain with uppercase.

• left n "leftborder" "rightborder": Renders a textual value in a block of width n, aligned to the left, with an optional left and right border. Has no effect on other values. This can be used to align material in tables. Widths are positive integers indicating the number of characters. Borders are strings inside double quotes; literal " and \ characters must be backslash-escaped.

• right n "leftborder" "rightborder": Renders a textual value in a block of width n, aligned to the right, and has no effect on other values.

• center n "leftborder" "rightborder": Renders a textual value in a block of width n, aligned to the center, and has no effect on other values.

Metadata variables ±

title, author, date

allow identification of basic aspects of the document. Included in PDF metadata through LaTeX and ConTeXt. These can be set through a pandoc title block, which allows for multiple authors, or through a YAML metadata block:

---
author:
- Aristotle
- Peter Abelard
...

Note that if you just want to set PDF or HTML metadata, without including a title block in the document itself, you can set the title-meta, author-meta, and date-meta variables. (By default these are set automatically, based on title, author, and date.) The page title in HTML is set by pagetitle, which is equal to title by default.

subtitle

document subtitle, included in HTML, EPUB, LaTeX, ConTeXt, and docx documents

abstract

document summary, included in HTML, LaTeX, ConTeXt, AsciiDoc, and docx documents

abstract-title

title of abstract, currently used only in HTML, EPUB, and docx. This will be set automatically to a localized value, depending on lang, but can be manually overridden.

keywords

list of keywords to be included in HTML, PDF, ODT, pptx, docx and AsciiDoc metadata; repeat as for author, above

subject

document subject, included in ODT, PDF, docx, EPUB, and pptx metadata

description

document description, included in ODT, docx and pptx metadata. Some applications show this as Comments metadata.

category

document category, included in docx and pptx metadata

Additionally, any root-level string metadata, not included in ODT, docx or pptx metadata is added as a custom property. The following YAML metadata block for instance:

---
title:  'This is the title'
subtitle: "This is the subtitle"
author:
- Author One
- Author Two
description: |
    This is a long
    description.

    It consists of two paragraphs
...

will include title, author and description as standard document properties and subtitle as a custom property when converting to docx, ODT or pptx.

Language variables ±

lang

identifies the main language of the document using IETF language tags (following the BCP 47 standard), such as en or en-GB. The Language subtag lookup tool can look up or verify these tags. This affects most formats, and controls hyphenation in PDF output when using LaTeX (through babel and polyglossia) or ConTeXt.

Use native pandoc Divs and Spans with the lang attribute to switch the language:

---
lang: en-GB
...

Text in the main document language (British English).

::: {lang=fr-CA}
> Cette citation est écrite en français canadien.
:::

More text in English. ['Zitat auf Deutsch.']{lang=de}

dir

the base script direction, either rtl (right-to-left) or ltr (left-to-right).

For bidirectional documents, native pandoc spans and divs with the dir attribute (value rtl or ltr) can be used to override the base direction in some output formats. This may not always be necessary if the final renderer (e.g. the browser, when generating HTML) supports the Unicode Bidirectional Algorithm.

When using LaTeX for bidirectional documents, only the xelatex engine is fully supported (use --pdf-engine=xelatex).

Variables for HTML ±

document-css

Enables inclusion of most of the CSS in the styles.html partial (have a look with pandoc --print-default-data-file=templates/styles.html). Unless you use --css, this variable is set to true by default. You can disable it with e.g. pandoc -M document-css=false.

mainfont

sets the CSS font-family property on the html element.

fontsize

sets the base CSS font-size, which you’d usually set to e.g. 20px, but it also accepts pt (12pt = 16px in most browsers).

fontcolor

sets the CSS color property on the html element.

linkcolor

sets the CSS color property on all links.

monofont

sets the CSS font-family property on code elements.

monobackgroundcolor

sets the CSS background-color property on code elements and adds extra padding.

linestretch

sets the CSS line-height property on the html element, which is preferred to be unitless.

maxwidth

sets the CSS max-width property (default is 32em).

backgroundcolor

sets the CSS background-color property on the html element.

margin-left, margin-right, margin-top, margin-bottom

sets the corresponding CSS padding properties on the body element.

To override or extend some CSS for just one document, include for example:

---
header-includes: |
  <style>
  blockquote {
    font-style: italic;
  }
  tr.even {
    background-color: #f0f0f0;
  }
  td, th {
    padding: 0.5em 2em 0.5em 0.5em;
  }
  tbody {
    border-bottom: none;
  }
  </style>
---

Variables for HTML math ±

classoption

when using --katex, you can render display math equations flush left using YAML metadata or with -M classoption=fleqn.

Variables for HTML slides ±

These affect HTML output when producing slide shows with pandoc.

institute

author affiliations: can be a list when there are multiple authors

revealjs-url

base URL for reveal.js documents (defaults to https://unpkg.com/reveal.js@^4/)

s5-url

base URL for S5 documents (defaults to s5/default)

slidy-url

base URL for Slidy documents (defaults to https://www.w3.org/Talks/Tools/Slidy2)

slideous-url

base URL for Slideous documents (defaults to slideous)

title-slide-attributes

additional attributes for the title slide of reveal.js slide shows. See background in reveal.js, beamer, and pptx for an example.

All reveal.js configuration options are available as variables. To turn off boolean flags that default to true in reveal.js, use 0.

Variables for Beamer slides ±

These variables change the appearance of PDF slides using beamer.

aspectratio

slide aspect ratio (43 for 4:3 [default], 169 for 16:9, 1610 for 16:10, 149 for 14:9, 141 for 1.41:1, 54 for 5:4, 32 for 3:2)

beameroption

add extra beamer option with \setbeameroption{}

institute

author affiliations: can be a list when there are multiple authors

logo

logo image for slides

navigation

controls navigation symbols (default is empty for no navigation symbols; other valid values are frame, vertical, and horizontal)

section-titles

enables “title pages” for new sections (default is true)

theme, colortheme, fonttheme, innertheme, outertheme

beamer themes

themeoptions, colorthemeoptions, fontthemeoptions, innerthemeoptions, outerthemeoptions

options for LaTeX beamer themes (lists)

titlegraphic

image for title slide: can be a list

titlegraphicoptions

options for title slide image

shorttitle, shortsubtitle, shortauthor, shortinstitute, shortdate

some beamer themes use short versions of the title, subtitle, author, institute, date

Variables for PowerPoint ±

These variables control the visual aspects of a slide show that are not easily controlled via templates.

monofont

font to use for code.

Variables for LaTeX ±

Pandoc uses these variables when creating a PDF with a LaTeX engine.

Variables for ConTeXt ±

Pandoc uses these variables when creating a PDF with ConTeXt.

fontsize

font size for body text (e.g. 10pt, 12pt)

headertext, footertext

text to be placed in running header or footer (see ConTeXt Headers and Footers); repeat up to four times for different placement

indenting

controls indentation of paragraphs, e.g. yes,small,next (see ConTeXt Indentation); repeat for multiple options

interlinespace

adjusts line spacing, e.g. 4ex (using setupinterlinespace); repeat for multiple options

layout

options for page margins and text arrangement (see ConTeXt Layout); repeat for multiple options

linkcolor, contrastcolor

color for links outside and inside a page, e.g. red, blue (see ConTeXt Color)

linkstyle

typeface style for links, e.g. normal, bold, slanted, boldslanted, type, cap, small

lof, lot

include list of figures, list of tables

mainfont, sansfont, monofont, mathfont

font families: take the name of any system font (see ConTeXt Font Switching)

mainfontfallback, sansfontfallback, monofontfallback

list of fonts to try, in order, if a glyph is not found in the main font. Use \definefallbackfamily-compatible font name syntax. Emoji fonts are unsupported.

margin-left, margin-right, margin-top, margin-bottom

sets margins, if layout is not used (otherwise layout overrides these)

pagenumbering

page number style and location (using setuppagenumbering); repeat for multiple options

papersize

paper size, e.g. letter, A4, landscape (see ConTeXt Paper Setup); repeat for multiple options

pdfa

adds to the preamble the setup necessary to generate PDF/A of the type specified, e.g. 1a:2005, 2a. If no type is specified (i.e. the value is set to True, by e.g. --metadata=pdfa or pdfa: true in a YAML metadata block), 1b:2005 will be used as default, for reasons of backwards compatibility. Using --variable=pdfa without specified value is not supported. To successfully generate PDF/A the required ICC color profiles have to be available and the content and all included files (such as images) have to be standard-conforming. The ICC profiles and output intent may be specified using the variables pdfaiccprofile and pdfaintent. See also ConTeXt PDFA for more details.

pdfaiccprofile

when used in conjunction with pdfa, specifies the ICC profile to use in the PDF, e.g. default.cmyk. If left unspecified, sRGB.icc is used as default. May be repeated to include multiple profiles. Note that the profiles have to be available on the system. They can be obtained from ConTeXt ICC Profiles.

pdfaintent

when used in conjunction with pdfa, specifies the output intent for the colors, e.g. ISO coated v2 300\letterpercent\space (ECI) If left unspecified, sRGB IEC61966-2.1 is used as default.

toc

include table of contents (can also be set using --toc/--table-of-contents)

urlstyle

typeface style for links without link text, e.g. normal, bold, slanted, boldslanted, type, cap, small

whitespace

spacing between paragraphs, e.g. none, small (using setupwhitespace)

includesource

include all source documents as file attachments in the PDF file

Variables for wkhtmltopdf ±

Pandoc uses these variables when creating a PDF with wkhtmltopdf. The --css option also affects the output.

footer-html, header-html

add information to the header and footer

margin-left, margin-right, margin-top, margin-bottom

set the page margins

papersize

sets the PDF paper size

Variables for man pages ±

adjusting

adjusts text to left (l), right (r), center (c), or both (b) margins

footer

footer in man pages

header

header in man pages

section

section number in man pages

Variables for Texinfo ±

version

version of software (used in title and title page)

filename

name of info file to be generated (defaults to a name based on the texi filename)

Variables for Typst ±

margin

A dictionary with the fields defined in the Typst documentation: x, y, top, bottom, left, right.

papersize

Paper size: a4, us-letter, etc.

mainfont

Name of system font to use for the main font.

fontsize

Font size (e.g., 12pt).

section-numbering

Schema to use for numbering sections, e.g. 1.A.1.

columns

Number of columns for body text.

Variables for ms ±

fontfamily

A (Avant Garde), B (Bookman), C (Helvetica), HN (Helvetica Narrow), P (Palatino), or T (Times New Roman). This setting does not affect source code, which is always displayed using monospace Courier. These built-in fonts are limited in their coverage of characters. Additional fonts may be installed using the script install-font.sh provided by Peter Schaffter and documented in detail on his web site.

indent

paragraph indent (e.g. 2m)

lineheight

line height (e.g. 12p)

pointsize

point size (e.g. 10p)

Variables set automatically ±

Pandoc sets these variables automatically in response to options or document contents; users can also modify them. These vary depending on the output format, and include the following:

body

body of document

date-meta

the date variable converted to ISO 8601 YYYY-MM-DD, included in all HTML based formats (dzslides, epub, html, html4, html5, revealjs, s5, slideous, slidy). The recognized formats for date are: mm/dd/yyyy, mm/dd/yy, yyyy-mm-dd (ISO 8601), dd MM yyyy (e.g. either 02 Apr 2018 or 02 April 2018), MM dd, yyyy (e.g. Apr. 02, 2018 or April 02, 2018),yyyy[mm[dd]](e.g.20180402, 201804 or 2018).

header-includes

contents specified by -H/--include-in-header (may have multiple values)

include-before

contents specified by -B/--include-before-body (may have multiple values)

include-after

contents specified by -A/--include-after-body (may have multiple values)

meta-json

JSON representation of all of the document’s metadata. Field values are transformed to the selected output format.

numbersections

non-null value if -N/--number-sections was specified

sourcefile, outputfile

source and destination filenames, as given on the command line. sourcefile can also be a list if input comes from multiple files, or empty if input is from stdin. You can use the following snippet in your template to distinguish them:

$if(sourcefile)$
$for(sourcefile)$
$sourcefile$
$endfor$
$else$
(stdin)
$endif$

Similarly, outputfile can be - if output goes to the terminal.

If you need absolute paths, use e.g. $curdir$/$sourcefile$.

curdir

working directory from which pandoc is run.

pandoc-version

pandoc version.

toc

non-null value if --toc/--table-of-contents was specified

toc-title

title of table of contents (works only with EPUB, HTML, revealjs, opendocument, odt, docx, pptx, beamer, LaTeX). Note that in docx and pptx a custom toc-title will be picked up from metadata, but cannot be set as a variable.

Extension: smart ±

Interpret straight quotes as curly quotes, --- as em-dashes, -- as en-dashes, and ... as ellipses. Nonbreaking spaces are inserted after certain abbreviations, such as “Mr.”

This extension can be enabled/disabled for the following formats:

input formats

markdown, commonmark, latex, mediawiki, org, rst, twiki, html

output formats

markdown, latex, context, rst

enabled by default in

markdown, latex, context (both input and output)

Note: If you are writing Markdown, then the smart extension has the reverse effect: what would have been curly quotes comes out straight.

In LaTeX, smart means to use the standard TeX ligatures for quotation marks (`` and '' for double quotes, ` and ' for single quotes) and dashes (-- for en-dash and --- for em-dash). If smart is disabled, then in reading LaTeX pandoc will parse these characters literally. In writing LaTeX, enabling smart tells pandoc to use the ligatures when possible; if smart is disabled pandoc will use unicode quotation mark and dash characters.

Extension: auto_identifiers ±

A heading without an explicitly specified identifier will be automatically assigned a unique identifier based on the heading text.

This extension can be enabled/disabled for the following formats:

input formats

markdown, latex, rst, mediawiki, textile

output formats

markdown, muse

enabled by default in

markdown, muse

The default algorithm used to derive the identifier from the heading text is:

• Remove all formatting, links, etc.
• Remove all footnotes.
• Remove all non-alphanumeric characters, except underscores, hyphens, and periods.
• Replace all spaces and newlines with hyphens.
• Convert all alphabetic characters to lowercase.
• Remove everything up to the first letter (identifiers may not begin with a number or punctuation mark).
• If nothing is left after this, use the identifier section.

Thus, for example,

These rules should, in most cases, allow one to determine the identifier from the heading text. The exception is when several headings have the same text; in this case, the first will get an identifier as described above; the second will get the same identifier with -1 appended; the third with -2; and so on.

(However, a different algorithm is used if gfm_auto_identifiers is enabled; see below.)

These identifiers are used to provide link targets in the table of contents generated by the --toc|--table-of-contents option. They also make it easy to provide links from one section of a document to another. A link to this section, for example, might look like this:

See the section on
[heading identifiers](#heading-identifiers-in-html-latex-and-context).

Note, however, that this method of providing links to sections works only in HTML, LaTeX, and ConTeXt formats.

If the --section-divs option is specified, then each section will be wrapped in a section (or a div, if html4 was specified), and the identifier will be attached to the enclosing <section> (or <div>) tag rather than the heading itself. This allows entire sections to be manipulated using JavaScript or treated differently in CSS.

Extension: ascii_identifiers ±

Causes the identifiers produced by auto_identifiers to be pure ASCII. Accents are stripped off of accented Latin letters, and non-Latin letters are omitted.

Extension: gfm_auto_identifiers ±

Changes the algorithm used by auto_identifiers to conform to GitHub’s method. Spaces are converted to dashes (-), uppercase characters to lowercase characters, and punctuation characters other than - and _ are removed. Emojis are replaced by their names.

Extension: literate_haskell ±

Treat the document as literate Haskell source.

This extension can be enabled/disabled for the following formats:

input formats

markdown, rst, latex

output formats

markdown, rst, latex, html

If you append +lhs (or +literate_haskell) to one of the formats above, pandoc will treat the document as literate Haskell source. This means that

• In Markdown input, “bird track” sections will be parsed as Haskell code rather than block quotations. Text between \begin{code} and \end{code} will also be treated as Haskell code. For ATX-style headings the character ‘=’ will be used instead of ‘#’.

• In Markdown output, code blocks with classes haskell and literate will be rendered using bird tracks, and block quotations will be indented one space, so they will not be treated as Haskell code. In addition, headings will be rendered setext-style (with underlines) rather than ATX-style (with ‘#’ characters). (This is because ghc treats ‘#’ characters in column 1 as introducing line numbers.)

• In restructured text input, “bird track” sections will be parsed as Haskell code.

• In restructured text output, code blocks with class haskell will be rendered using bird tracks.

• In LaTeX input, text in code environments will be parsed as Haskell code.

• In LaTeX output, code blocks with class haskell will be rendered inside code environments.

• In HTML output, code blocks with class haskell will be rendered with class literatehaskell and bird tracks.

Examples:

pandoc -f markdown+lhs -t html

reads literate Haskell source formatted with Markdown conventions and writes ordinary HTML (without bird tracks).

pandoc -f markdown+lhs -t html+lhs

writes HTML with the Haskell code in bird tracks, so it can be copied and pasted as literate Haskell source.

Note that GHC expects the bird tracks in the first column, so indented literate code blocks (e.g. inside an itemized environment) will not be picked up by the Haskell compiler.

Extension: empty_paragraphs ±

Allows empty paragraphs. By default empty paragraphs are omitted.

This extension can be enabled/disabled for the following formats:

input formats

docx, html

output formats

docx, odt, opendocument, html, latex

Extension: native_numbering ±

Enables native numbering of figures and tables. Enumeration starts at 1.

This extension can be enabled/disabled for the following formats:

output formats

odt, opendocument, docx

Extension: xrefs_name ±

Links to headings, figures and tables inside the document are substituted with cross-references that will use the name or caption of the referenced item. The original link text is replaced once the generated document is refreshed. This extension can be combined with xrefs_number in which case numbers will appear before the name.

Text in cross-references is only made consistent with the referenced item once the document has been refreshed.

This extension can be enabled/disabled for the following formats:

output formats

odt, opendocument

Extension: xrefs_number ±

Links to headings, figures and tables inside the document are substituted with cross-references that will use the number of the referenced item. The original link text is discarded. This extension can be combined with xrefs_name in which case the name or caption numbers will appear after the number.

For the xrefs_number to be useful heading numbers must be enabled in the generated document, also table and figure captions must be enabled using for example the native_numbering extension.

Numbers in cross-references are only visible in the final document once it has been refreshed.

This extension can be enabled/disabled for the following formats:

output formats

odt, opendocument

Extension: styles ±

When converting from docx, read all docx styles as divs (for paragraph styles) and spans (for character styles) regardless of whether pandoc understands the meaning of these styles. This can be used with docx custom styles. Disabled by default.

input formats

docx

Extension: amuse ±

In the muse input format, this enables Text::Amuse extensions to Emacs Muse markup.

Extension: raw_markdown ±

In the ipynb input format, this causes Markdown cells to be included as raw Markdown blocks (allowing lossless round-tripping) rather than being parsed. Use this only when you are targeting ipynb or a Markdown-based output format.

Extension: citations (typst) ±

When the citations extension is enabled in typst (as it is by default), typst citations will be parsed as native pandoc citations, and native pandoc citations will be rendered as typst citations.

Extension: citations (org) ±

When the citations extension is enabled in org, org-cite and org-ref style citations will be parsed as native pandoc citations, and org-cite citations will be used to render native pandoc citations.

Extension: citations (docx) ±

When citations is enabled in docx, citations inserted by Zotero or Mendeley or EndNote plugins will be parsed as native pandoc citations. (Otherwise, the formatted citations generated by the bibliographic software will be parsed as regular text.)

Extension: fancy_lists (org) ±

Some aspects of Pandoc’s Markdown fancy lists are also accepted in org input, mimicking the option org-list-allow-alphabetical in Emacs. As in Org Mode, enabling this extension allows lowercase and uppercase alphabetical markers for ordered lists to be parsed in addition to arabic ones. Note that for Org, this does not include roman numerals or the # placeholder that are enabled by the extension in Pandoc’s Markdown.

Extension: element_citations ±

In the jats output formats, this causes reference items to be replaced with <element-citation> elements. These elements are not influenced by CSL styles, but all information on the item is included in tags.

Extension: ntb ±

In the context output format this enables the use of Natural Tables (TABLE) instead of the default Extreme Tables (xtables). Natural tables allow more fine-grained global customization but come at a performance penalty compared to extreme tables.

Extension: tagging ±

Enabling this extension with context output will produce markup suitable for the production of tagged PDFs. This includes additional markers for paragraphs and alternative markup for emphasized text. The emphasis-command template variable is set if the extension is enabled.

Extension: escaped_line_breaks ±

A backslash followed by a newline is also a hard line break. Note: in multiline and grid table cells, this is the only way to create a hard line break, since trailing spaces in the cells are ignored.

Setext-style headings ±

A setext-style heading is a line of text “underlined” with a row of = signs (for a level-one heading) or - signs (for a level-two heading):

A level-one heading
===================

A level-two heading
-------------------

The heading text can contain inline formatting, such as emphasis (see Inline formatting, below).

ATX-style headings ±

An ATX-style heading consists of one to six # signs and a line of text, optionally followed by any number of # signs. The number of # signs at the beginning of the line is the heading level:

## A level-two heading

### A level-three heading ###

As with setext-style headings, the heading text can contain formatting:

# A level-one heading with a [link](/url) and *emphasis*

Extension: blank_before_header ±

Original Markdown syntax does not require a blank line before a heading. Pandoc does require this (except, of course, at the beginning of the document). The reason for the requirement is that it is all too easy for a # to end up at the beginning of a line by accident (perhaps through line wrapping). Consider, for example:

I like several of their flavors of ice cream:
#22, for example, and #5.

Extension: space_in_atx_header ±

Many Markdown implementations do not require a space between the opening #s of an ATX heading and the heading text, so that #5 bolt and #hashtag count as headings. With this extension, pandoc does require the space.

Heading identifiers ±

See also the auto_identifiers extension above.

Extension: header_attributes ±

Headings can be assigned attributes using this syntax at the end of the line containing the heading text:

{#identifier .class .class key=value key=value}

Thus, for example, the following headings will all be assigned the identifier foo:

# My heading {#foo}

## My heading ##    {#foo}

My other heading   {#foo}
---------------

(This syntax is compatible with PHP Markdown Extra.)

Note that although this syntax allows assignment of classes and key/value attributes, writers generally don’t use all of this information. Identifiers, classes, and key/value attributes are used in HTML and HTML-based formats such as EPUB and slidy. Identifiers are used for labels and link anchors in the LaTeX, ConTeXt, Textile, Jira markup, and AsciiDoc writers.

Headings with the class unnumbered will not be numbered, even if --number-sections is specified. A single hyphen (-) in an attribute context is equivalent to .unnumbered, and preferable in non-English documents. So,

# My heading {-}

is just the same as

# My heading {.unnumbered}

If the unlisted class is present in addition to unnumbered, the heading will not be included in a table of contents. (Currently this feature is only implemented for certain formats: those based on LaTeX and HTML, PowerPoint, and RTF.)

Extension: implicit_header_references ±

Pandoc behaves as if reference links have been defined for each heading. So, to link to a heading

# Heading identifiers in HTML

you can simply write

[Heading identifiers in HTML]

or

[Heading identifiers in HTML][]

or

[the section on heading identifiers][heading identifiers in
HTML]

instead of giving the identifier explicitly:

[Heading identifiers in HTML](#heading-identifiers-in-html)

If there are multiple headings with identical text, the corresponding reference will link to the first one only, and you will need to use explicit links to link to the others, as described above.

Like regular reference links, these references are case-insensitive.

Explicit link reference definitions always take priority over implicit heading references. So, in the following example, the link will point to bar, not to #foo:

# Foo

[foo]: bar

See [foo]

Extension: blank_before_blockquote ±

Original Markdown syntax does not require a blank line before a block quote. Pandoc does require this (except, of course, at the beginning of the document). The reason for the requirement is that it is all too easy for a > to end up at the beginning of a line by accident (perhaps through line wrapping). So, unless the markdown_strict format is used, the following does not produce a nested block quote in pandoc:

> This is a block quote.
>> Not nested, since `blank_before_blockquote` is enabled by default

Indented code blocks ±

A block of text indented four spaces (or one tab) is treated as verbatim text: that is, special characters do not trigger special formatting, and all spaces and line breaks are preserved. For example,

    if (a > 3) {
      moveShip(5 * gravity, DOWN);
    }

The initial (four space or one tab) indentation is not considered part of the verbatim text, and is removed in the output.

Note: blank lines in the verbatim text need not begin with four spaces.

Fenced code blocks ±

Extension: fenced_code_blocks ±

In addition to standard indented code blocks, pandoc supports fenced code blocks. These begin with a row of three or more tildes (~) and end with a row of tildes that must be at least as long as the starting row. Everything between these lines is treated as code. No indentation is necessary:

~~~~~~~
if (a > 3) {
  moveShip(5 * gravity, DOWN);
}
~~~~~~~

Like regular code blocks, fenced code blocks must be separated from surrounding text by blank lines.

If the code itself contains a row of tildes or backticks, just use a longer row of tildes or backticks at the start and end:

~~~~~~~~~~~~~~~~
~~~~~~~~~~
code including tildes
~~~~~~~~~~
~~~~~~~~~~~~~~~~

Extension: backtick_code_blocks ±

Same as fenced_code_blocks, but uses backticks (`) instead of tildes (~).

Extension: fenced_code_attributes ±

Optionally, you may attach attributes to fenced or backtick code block using this syntax:

~~~~ {#mycode .haskell .numberLines startFrom="100"}
qsort []     = []
qsort (x:xs) = qsort (filter (< x) xs) ++ [x] ++
               qsort (filter (>= x) xs)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Here mycode is an identifier, haskell and numberLines are classes, and startFrom is an attribute with value 100. Some output formats can use this information to do syntax highlighting. Currently, the only output formats that use this information are HTML, LaTeX, Docx, Ms, and PowerPoint. If highlighting is supported for your output format and language, then the code block above will appear highlighted, with numbered lines. (To see which languages are supported, type pandoc --list-highlight-languages.) Otherwise, the code block above will appear as follows:

<pre id="mycode" class="haskell numberLines" startFrom="100">
  <code>
  ...
  </code>
</pre>

The numberLines (or number-lines) class will cause the lines of the code block to be numbered, starting with 1 or the value of the startFrom attribute. The lineAnchors (or line-anchors) class will cause the lines to be clickable anchors in HTML output.

A shortcut form can also be used for specifying the language of the code block:

```haskell
qsort [] = []
```

This is equivalent to:

``` {.haskell}
qsort [] = []
```

This shortcut form may be combined with attributes:

```haskell {.numberLines}
qsort [] = []
```

Which is equivalent to:

``` {.haskell .numberLines}
qsort [] = []
```

If the fenced_code_attributes extension is disabled, but input contains class attribute(s) for the code block, the first class attribute will be printed after the opening fence as a bare word.

To prevent all highlighting, use the --no-highlight flag. To set the highlighting style, use --highlight-style. For more information on highlighting, see Syntax highlighting, below.

Extension: line_blocks ±

A line block is a sequence of lines beginning with a vertical bar (|) followed by a space. The division into lines will be preserved in the output, as will any leading spaces; otherwise, the lines will be formatted as Markdown. This is useful for verse and addresses:

| The limerick packs laughs anatomical
| In space that is quite economical.
|    But the good ones I've seen
|    So seldom are clean
| And the clean ones so seldom are comical

| 200 Main St.
| Berkeley, CA 94718

The lines can be hard-wrapped if needed, but the continuation line must begin with a space.

| The Right Honorable Most Venerable and Righteous Samuel L.
  Constable, Jr.
| 200 Main St.
| Berkeley, CA 94718

Inline formatting (such as emphasis) is allowed in the content (though it can’t cross line boundaries). Block-level formatting (such as block quotes or lists) is not recognized.

This syntax is borrowed from reStructuredText.

Bullet lists ±

A bullet list is a list of bulleted list items. A bulleted list item begins with a bullet (*, +, or -). Here is a simple example:

* one
* two
* three

This will produce a “compact” list. If you want a “loose” list, in which each item is formatted as a paragraph, put spaces between the items:

* one

* two

* three

The bullets need not be flush with the left margin; they may be indented one, two, or three spaces. The bullet must be followed by whitespace.

List items look best if subsequent lines are flush with the first line (after the bullet):

* here is my first
  list item.
* and my second.

But Markdown also allows a “lazy” format:

* here is my first
list item.
* and my second.

Block content in list items ±

A list item may contain multiple paragraphs and other block-level content. However, subsequent paragraphs must be preceded by a blank line and indented to line up with the first non-space content after the list marker.

  * First paragraph.

    Continued.

  * Second paragraph. With a code block, which must be indented
    eight spaces:

        { code }

Exception: if the list marker is followed by an indented code block, which must begin 5 spaces after the list marker, then subsequent paragraphs must begin two columns after the last character of the list marker:

*     code

  continuation paragraph

List items may include other lists. In this case the preceding blank line is optional. The nested list must be indented to line up with the first non-space character after the list marker of the containing list item.

* fruits
  + apples
    - macintosh
    - red delicious
  + pears
  + peaches
* vegetables
  + broccoli
  + chard

As noted above, Markdown allows you to write list items “lazily,” instead of indenting continuation lines. However, if there are multiple paragraphs or other blocks in a list item, the first line of each must be indented.

+ A lazy, lazy, list
item.

+ Another one; this looks
bad but is legal.

    Second paragraph of second
list item.

Ordered lists ±

Ordered lists work just like bulleted lists, except that the items begin with enumerators rather than bullets.

In original Markdown, enumerators are decimal numbers followed by a period and a space. The numbers themselves are ignored, so there is no difference between this list:

1.  one
2.  two
3.  three

and this one:

5.  one
7.  two
1.  three

Extension: fancy_lists ±

Unlike original Markdown, pandoc allows ordered list items to be marked with uppercase and lowercase letters and roman numerals, in addition to Arabic numerals. List markers may be enclosed in parentheses or followed by a single right-parenthesis or period. They must be separated from the text that follows by at least one space, and, if the list marker is a capital letter with a period, by at least two spaces.¹

The fancy_lists extension also allows ‘#’ to be used as an ordered list marker in place of a numeral:

#. one
#. two

Note: the ‘#’ ordered list marker doesn’t work with commonmark.

Extension: startnum ±

Pandoc also pays attention to the type of list marker used, and to the starting number, and both of these are preserved where possible in the output format. Thus, the following yields a list with numbers followed by a single parenthesis, starting with 9, and a sublist with lowercase roman numerals:

 9)  Ninth
10)  Tenth
11)  Eleventh
       i. subone
      ii. subtwo
     iii. subthree

Pandoc will start a new list each time a different type of list marker is used. So, the following will create three lists:

(2) Two
(5) Three
1.  Four
*   Five

If default list markers are desired, use #.:

#.  one
#.  two
#.  three

Extension: task_lists ±

Pandoc supports task lists, using the syntax of GitHub-Flavored Markdown.

- [ ] an unchecked task list item
- [x] checked item

Definition lists ±

Extension: definition_lists ±

Pandoc supports definition lists, using the syntax of PHP Markdown Extra with some extensions.²

Term 1

:   Definition 1

Term 2 with *inline markup*

:   Definition 2

        { some code, part of Definition 2 }

    Third paragraph of definition 2.

Each term must fit on one line, which may optionally be followed by a blank line, and must be followed by one or more definitions. A definition begins with a colon or tilde, which may be indented one or two spaces.

A term may have multiple definitions, and each definition may consist of one or more block elements (paragraph, code block, list, etc.), each indented four spaces or one tab stop. The body of the definition (not including the first line) should be indented four spaces. However, as with other Markdown lists, you can “lazily” omit indentation except at the beginning of a paragraph or other block element:

Term 1

:   Definition
with lazy continuation.

    Second paragraph of the definition.

If you leave space before the definition (as in the example above), the text of the definition will be treated as a paragraph. In some output formats, this will mean greater spacing between term/definition pairs. For a more compact definition list, omit the space before the definition:

Term 1
  ~ Definition 1

Term 2
  ~ Definition 2a
  ~ Definition 2b

Note that space between items in a definition list is required. (A variant that loosens this requirement, but disallows “lazy” hard wrapping, can be activated with the compact_definition_lists extension.)

Numbered example lists ±

Extension: example_lists ±

The special list marker @ can be used for sequentially numbered examples. The first list item with a @ marker will be numbered ‘1’, the next ‘2’, and so on, throughout the document. The numbered examples need not occur in a single list; each new list using @ will take up where the last stopped. So, for example:

(@)  My first example will be numbered (1).
(@)  My second example will be numbered (2).

Explanation of examples.

(@)  My third example will be numbered (3).

Numbered examples can be labeled and referred to elsewhere in the document:

(@good)  This is a good example.

As (@good) illustrates, ...

The label can be any string of alphanumeric characters, underscores, or hyphens.

Continuation paragraphs in example lists must always be indented four spaces, regardless of the length of the list marker. That is, example lists always behave as if the four_space_rule extension is set. This is because example labels tend to be long, and indenting content to the first non-space character after the label would be awkward.

You can repeat an earlier numbered example by re-using its label:

(@foo) Sample sentence.

Intervening text...

This theory can explain the case we saw earlier (repeated):

(@foo) Sample sentence.

This only works reliably, though, if the repeated item is in a list by itself, because each numbered example list will be numbered continuously from its starting number.

Ending a list ±

What if you want to put an indented code block after a list?

-   item one
-   item two

    { my code block }

Trouble! Here pandoc (like other Markdown implementations) will treat { my code block } as the second paragraph of item two, and not as a code block.

To “cut off” the list after item two, you can insert some non-indented content, like an HTML comment, which won’t produce visible output in any format:

-   item one
-   item two

<!-- end of list -->

    { my code block }

You can use the same trick if you want two consecutive lists instead of one big list:

1.  one
2.  two
3.  three

<!-- -->

1.  uno
2.  dos
3.  tres

Extension: table_captions ±

A caption may optionally be provided with all 4 kinds of tables (as illustrated in the examples below). A caption is a paragraph beginning with the string Table: (or table: or just :), which will be stripped off. It may appear either before or after the table.

Extension: simple_tables ±

Simple tables look like this:

  Right     Left     Center     Default
-------     ------ ----------   -------
     12     12        12            12
    123     123       123          123
      1     1          1             1

Table:  Demonstration of simple table syntax.

The header and table rows must each fit on one line. Column alignments are determined by the position of the header text relative to the dashed line below it:³

• If the dashed line is flush with the header text on the right side but extends beyond it on the left, the column is right-aligned.
• If the dashed line is flush with the header text on the left side but extends beyond it on the right, the column is left-aligned.
• If the dashed line extends beyond the header text on both sides, the column is centered.
• If the dashed line is flush with the header text on both sides, the default alignment is used (in most cases, this will be left).

The table must end with a blank line, or a line of dashes followed by a blank line.

The column header row may be omitted, provided a dashed line is used to end the table. For example:

-------     ------ ----------   -------
     12     12        12             12
    123     123       123           123
      1     1          1              1
-------     ------ ----------   -------

When the header row is omitted, column alignments are determined on the basis of the first line of the table body. So, in the tables above, the columns would be right, left, center, and right aligned, respectively.

Extension: multiline_tables ±

Multiline tables allow header and table rows to span multiple lines of text (but cells that span multiple columns or rows of the table are not supported). Here is an example:

-------------------------------------------------------------
 Centered   Default           Right Left
  Header    Aligned         Aligned Aligned
----------- ------- --------------- -------------------------
   First    row                12.0 Example of a row that
                                    spans multiple lines.

  Second    row                 5.0 Here's another one. Note
                                    the blank line between
                                    rows.
-------------------------------------------------------------

Table: Here's the caption. It, too, may span
multiple lines.

These work like simple tables, but with the following differences:

• They must begin with a row of dashes, before the header text (unless the header row is omitted).
• They must end with a row of dashes, then a blank line.
• The rows must be separated by blank lines.

In multiline tables, the table parser pays attention to the widths of the columns, and the writers try to reproduce these relative widths in the output. So, if you find that one of the columns is too narrow in the output, try widening it in the Markdown source.

The header may be omitted in multiline tables as well as simple tables:

----------- ------- --------------- -------------------------
   First    row                12.0 Example of a row that
                                    spans multiple lines.

  Second    row                 5.0 Here's another one. Note
                                    the blank line between
                                    rows.
----------- ------- --------------- -------------------------

: Here's a multiline table without a header.

It is possible for a multiline table to have just one row, but the row should be followed by a blank line (and then the row of dashes that ends the table), or the table may be interpreted as a simple table.

Extension: grid_tables ±

Grid tables look like this:

: Sample grid table.

+---------------+---------------+--------------------+
| Fruit         | Price         | Advantages         |
+===============+===============+====================+
| Bananas       | $1.34         | - built-in wrapper |
|               |               | - bright color     |
+---------------+---------------+--------------------+
| Oranges       | $2.10         | - cures scurvy     |
|               |               | - tasty            |
+---------------+---------------+--------------------+

The row of =s separates the header from the table body, and can be omitted for a headerless table. The cells of grid tables may contain arbitrary block elements (multiple paragraphs, code blocks, lists, etc.).

Cells can span multiple columns or rows:

+---------------------+----------+
| Property            | Earth    |
+=============+=======+==========+
|             | min   | -89.2 °C |
| Temperature +-------+----------+
| 1961-1990   | mean  | 14 °C    |
|             +-------+----------+
|             | max   | 56.7 °C  |
+-------------+-------+----------+

A table header may contain more than one row:

+---------------------+-----------------------+
| Location            | Temperature 1961-1990 |
|                     | in degree Celsius     |
|                     +-------+-------+-------+
|                     | min   | mean  | max   |
+=====================+=======+=======+=======+
| Antarctica          | -89.2 | N/A   | 19.8  |
+---------------------+-------+-------+-------+
| Earth               | -89.2 | 14    | 56.7  |
+---------------------+-------+-------+-------+

Alignments can be specified as with pipe tables, by putting colons at the boundaries of the separator line after the header:

+---------------+---------------+--------------------+
| Right         | Left          | Centered           |
+==============:+:==============+:==================:+
| Bananas       | $1.34         | built-in wrapper   |
+---------------+---------------+--------------------+

For headerless tables, the colons go on the top line instead:

+--------------:+:--------------+:------------------:+
| Right         | Left          | Centered           |
+---------------+---------------+--------------------+

A table foot can be defined by enclosing it with separator lines that use = instead of -:

 +---------------+---------------+
 | Fruit         | Price         |
 +===============+===============+
 | Bananas       | $1.34         |
 +---------------+---------------+
 | Oranges       | $2.10         |
 +===============+===============+
 | Sum           | $3.44         |
 +===============+===============+

The foot must always be placed at the very bottom of the table.

Grid tables can be created easily using Emacs’ table-mode (M-x table-insert).

Extension: pipe_tables ±

Pipe tables look like this:

| Right | Left | Default | Center |
|------:|:-----|---------|:------:|
|   12  |  12  |    12   |    12  |
|  123  |  123 |   123   |   123  |
|    1  |    1 |     1   |     1  |

  : Demonstration of pipe table syntax.

The syntax is identical to PHP Markdown Extra tables. The beginning and ending pipe characters are optional, but pipes are required between all columns. The colons indicate column alignment as shown. The header cannot be omitted. To simulate a headerless table, include a header with blank cells.

Since the pipes indicate column boundaries, columns need not be vertically aligned, as they are in the above example. So, this is a perfectly legal (though ugly) pipe table:

fruit| price
-----|-----:
apple|2.05
pear|1.37
orange|3.09

The cells of pipe tables cannot contain block elements like paragraphs and lists, and cannot span multiple lines. If any line of the Markdown source is longer than the column width (see --columns), then the table will take up the full text width and the cell contents will wrap, with the relative cell widths determined by the number of dashes in the line separating the table header from the table body. (For example ---|- would make the first column 3/4 and the second column 1/4 of the full text width.) On the other hand, if no lines are wider than column width, then cell contents will not be wrapped, and the cells will be sized to their contents.

Note: pandoc also recognizes pipe tables of the following form, as can be produced by Emacs’ orgtbl-mode:

| One | Two   |
|-----+-------|
| my  | table |
| is  | nice  |

The difference is that + is used instead of |. Other orgtbl features are not supported. In particular, to get non-default column alignment, you’ll need to add colons as above.

Extension: pandoc_title_block ±

If the file begins with a title block

% title
% author(s) (separated by semicolons)
% date

it will be parsed as bibliographic information, not regular text. (It will be used, for example, in the title of standalone LaTeX or HTML output.) The block may contain just a title, a title and an author, or all three elements. If you want to include an author but no title, or a title and a date but no author, you need a blank line:

%
% Author

% My title
%
% June 15, 2006

The title may occupy multiple lines, but continuation lines must begin with leading space, thus:

% My title
  on multiple lines

If a document has multiple authors, the authors may be put on separate lines with leading space, or separated by semicolons, or both. So, all of the following are equivalent:

% Author One
  Author Two

% Author One; Author Two

% Author One;
  Author Two

The date must fit on one line.

All three metadata fields may contain standard inline formatting (italics, links, footnotes, etc.).

Title blocks will always be parsed, but they will affect the output only when the --standalone (-s) option is chosen. In HTML output, titles will appear twice: once in the document head—this is the title that will appear at the top of the window in a browser—and once at the beginning of the document body. The title in the document head can have an optional prefix attached (--title-prefix or -T option). The title in the body appears as an H1 element with class “title”, so it can be suppressed or reformatted with CSS. If a title prefix is specified with -T and no title block appears in the document, the title prefix will be used by itself as the HTML title.

The man page writer extracts a title, man page section number, and other header and footer information from the title line. The title is assumed to be the first word on the title line, which may optionally end with a (single-digit) section number in parentheses. (There should be no space between the title and the parentheses.) Anything after this is assumed to be additional footer and header text. A single pipe character (|) should be used to separate the footer text from the header text. Thus,

% PANDOC(1)

will yield a man page with the title PANDOC and section 1.

% PANDOC(1) Pandoc User Manuals

will also have “Pandoc User Manuals” in the footer.

% PANDOC(1) Pandoc User Manuals | Version 4.0

will also have “Version 4.0” in the header.

Extension: yaml_metadata_block ±

A YAML metadata block is a valid YAML object, delimited by a line of three hyphens (---) at the top and a line of three hyphens (---) or three dots (...) at the bottom. The initial line --- must not be followed by a blank line. A YAML metadata block may occur anywhere in the document, but if it is not at the beginning, it must be preceded by a blank line.

Note that, because of the way pandoc concatenates input files when several are provided, you may also keep the metadata in a separate YAML file and pass it to pandoc as an argument, along with your Markdown files:

pandoc chap1.md chap2.md chap3.md metadata.yaml -s -o book.html

Just be sure that the YAML file begins with --- and ends with --- or .... Alternatively, you can use the --metadata-file option. Using that approach however, you cannot reference content (like footnotes) from the main Markdown input document.

Metadata will be taken from the fields of the YAML object and added to any existing document metadata. Metadata can contain lists and objects (nested arbitrarily), but all string scalars will be interpreted as Markdown. Fields with names ending in an underscore will be ignored by pandoc. (They may be given a role by external processors.) Field names must not be interpretable as YAML numbers or boolean values (so, for example, yes, True, and 15 cannot be used as field names).

A document may contain multiple metadata blocks. If two metadata blocks attempt to set the same field, the value from the second block will be taken.

Each metadata block is handled internally as an independent YAML document. This means, for example, that any YAML anchors defined in a block cannot be referenced in another block.

When pandoc is used with -t markdown to create a Markdown document, a YAML metadata block will be produced only if the -s/--standalone option is used. All of the metadata will appear in a single block at the beginning of the document.

Note that YAML escaping rules must be followed. Thus, for example, if a title contains a colon, it must be quoted, and if it contains a backslash escape, then it must be ensured that it is not treated as a YAML escape sequence. The pipe character (|) can be used to begin an indented block that will be interpreted literally, without need for escaping. This form is necessary when the field contains blank lines or block-level formatting:

---
title:  'This is the title: it contains a colon'
author:
- Author One
- Author Two
keywords: [nothing, nothingness]
abstract: |
  This is the abstract.

  It consists of two paragraphs.
...

The literal block after the | must be indented relative to the line containing the |. If it is not, the YAML will be invalid and pandoc will not interpret it as metadata. For an overview of the complex rules governing YAML, see the Wikipedia entry on YAML syntax.

Template variables will be set automatically from the metadata. Thus, for example, in writing HTML, the variable abstract will be set to the HTML equivalent of the Markdown in the abstract field:

<p>This is the abstract.</p>
<p>It consists of two paragraphs.</p>

Variables can contain arbitrary YAML structures, but the template must match this structure. The author variable in the default templates expects a simple list or string, but can be changed to support more complicated structures. The following combination, for example, would add an affiliation to the author if one is given:

---
title: The document title
author:
- name: Author One
  affiliation: University of Somewhere
- name: Author Two
  affiliation: University of Nowhere
...

To use the structured authors in the example above, you would need a custom template:

$for(author)$
$if(author.name)$
$author.name$$if(author.affiliation)$ ($author.affiliation$)$endif$
$else$
$author$
$endif$
$endfor$

Raw content to include in the document’s header may be specified using header-includes; however, it is important to mark up this content as raw code for a particular output format, using the raw_attribute extension, or it will be interpreted as Markdown. For example:

header-includes:
- |
  ```{=latex}
  \let\oldsection\section
  \renewcommand{\section}[1]{\clearpage\oldsection{#1}}
  ```

Note: the yaml_metadata_block extension works with commonmark as well as markdown (and it is enabled by default in gfm and commonmark_x). However, in these formats the following restrictions apply:

• The YAML metadata block must occur at the beginning of the document (and there can be only one). If multiple files are given as arguments to pandoc, only the first can be a YAML metadata block.

• The leaf nodes of the YAML structure are parsed in isolation from each other and from the rest of the document. So, for example, you can’t use a reference link in these contexts if the link definition is somewhere else in the document.

Extension: all_symbols_escapable ±

Except inside a code block or inline code, any punctuation or space character preceded by a backslash will be treated literally, even if it would normally indicate formatting. Thus, for example, if one writes

*\*hello\**

one will get

<em>*hello*</em>

instead of

<strong>hello</strong>

This rule is easier to remember than original Markdown’s rule, which allows only the following characters to be backslash-escaped:

\`*_{}[]()>#+-.!

(However, if the markdown_strict format is used, the original Markdown rule will be used.)

A backslash-escaped space is parsed as a nonbreaking space. In TeX output, it will appear as ~. In HTML and XML output, it will appear as a literal unicode nonbreaking space character (note that it will thus actually look “invisible” in the generated HTML source; you can still use the --ascii command-line option to make it appear as an explicit entity).

A backslash-escaped newline (i.e. a backslash occurring at the end of a line) is parsed as a hard line break. It will appear in TeX output as \\ and in HTML as <br />. This is a nice alternative to Markdown’s “invisible” way of indicating hard line breaks using two trailing spaces on a line.

Backslash escapes do not work in verbatim contexts.

Emphasis ±

To emphasize some text, surround it with *s or _, like this:

This text is _emphasized with underscores_, and this
is *emphasized with asterisks*.

Double * or _ produces strong emphasis:

This is **strong emphasis** and __with underscores__.

A * or _ character surrounded by spaces, or backslash-escaped, will not trigger emphasis:

This is * not emphasized *, and \*neither is this\*.

Extension: intraword_underscores ±

Because _ is sometimes used inside words and identifiers, pandoc does not interpret a _ surrounded by alphanumeric characters as an emphasis marker. If you want to emphasize just part of a word, use *:

feas*ible*, not feas*able*.

Strikeout ±

Extension: strikeout ±

To strike out a section of text with a horizontal line, begin and end it with ~~. Thus, for example,

This ~~is deleted text.~~

Superscripts and subscripts ±

Extension: superscript, subscript ±

Superscripts may be written by surrounding the superscripted text by ^ characters; subscripts may be written by surrounding the subscripted text by ~ characters. Thus, for example,

H~2~O is a liquid.  2^10^ is 1024.

The text between ^...^ or ~...~ may not contain spaces or newlines. If the superscripted or subscripted text contains spaces, these spaces must be escaped with backslashes. (This is to prevent accidental superscripting and subscripting through the ordinary use of ~ and ^, and also bad interactions with footnotes.) Thus, if you want the letter P with ‘a cat’ in subscripts, use P~a\ cat~, not P~a cat~.

Verbatim ±

To make a short span of text verbatim, put it inside backticks:

What is the difference between `>>=` and `>>`?

If the verbatim text includes a backtick, use double backticks:

Here is a literal backtick `` ` ``.

(The spaces after the opening backticks and before the closing backticks will be ignored.)

The general rule is that a verbatim span starts with a string of consecutive backticks (optionally followed by a space) and ends with a string of the same number of backticks (optionally preceded by a space).

Note that backslash-escapes (and other Markdown constructs) do not work in verbatim contexts:

This is a backslash followed by an asterisk: `\*`.

Extension: inline_code_attributes ±

Attributes can be attached to verbatim text, just as with fenced code blocks:

`<$>`{.haskell}

Underline ±

To underline text, use the underline class:

[Underline]{.underline}

Or, without the bracketed_spans extension (but with native_spans):

<span class="underline">Underline</span>

This will work in all output formats that support underline.

Small caps ±

To write small caps, use the smallcaps class:

[Small caps]{.smallcaps}

Or, without the bracketed_spans extension:

<span class="smallcaps">Small caps</span>

For compatibility with other Markdown flavors, CSS is also supported:

<span style="font-variant:small-caps;">Small caps</span>

This will work in all output formats that support small caps.

Highlighting ±