plipconfig(8) — Linux manual page

PLIPCONFIG(8)      Linux System Administrator's Manual     PLIPCONFIG(8)

NAME         top

       plipconfig - fine tune PLIP device parameters

SYNOPSIS         top

       plipconfig interface [nibble NN] [trigger NN]
       plipconfig [-V] [--version] [-h] [--help]

DESCRIPTION         top

       Plipconfig is used to (hopefully) improve PLIP performance by
       changing the default timing parameters used by the PLIP protocol.
       Results are dependent on the parallel port hardware, cable, and
       the CPU speed of each machine on each end of the PLIP link.

       If the single interface argument is given, plipconfig displays
       the status of the given interface only.  Otherwise, it will try
       to set the options.

OPTIONS         top

       nibble NN
              Sets the nibble wait value in microseconds. Default is
              3000.

       trigger NN
              Sets the trigger wait value in microseconds. Default is
              500.

       PLIP speed can in some cases be improved by lowering the default
       values.  Values which are too low may cause excess use of CPU,
       poor interrupt response time resulting in serial ports dropping
       characters, or in dropping of PLIP packets. Changing the plip MTU
       can also affect PLIP speed.

NOTE         top

       If you get no response it is far more likely the irq is wrong and
       needs setting with ifconfig. The few cases where the default
       parameters will be too fast are those using very long cables.
       Something you should never do as the parallel port is not
       specified or designed for driving long cable runs.

SEE ALSO         top

       ifconfig(8)

BUGS         top

       Non.

AUTHOR         top

       John Paul Morrison, <[email protected]>,
       <[email protected]>

COLOPHON         top

       This page is part of the net-tools (networking utilities)
       project.  Information about the project can be found at 
       ⟨http:https://net-tools.sourceforge.net/⟩.  If you have a bug report for
       this manual page, see ⟨http:https://net-tools.sourceforge.net/⟩.  This
       page was obtained from the project's upstream Git repository
       ⟨git:https://git.code.sf.net/p/net-tools/code⟩ on 2023-12-22.  (At that
       time, the date of the most recent commit that was found in the
       repository was 2023-06-29.)  If you discover any rendering
       problems in this HTML version of the page, or you believe there
       is a better or more up-to-date source for the page, or you have
       corrections or improvements to the information in this COLOPHON
       (which is not part of the original manual page), send a mail to
       [email protected]

net-tools                      2008-10-03                  PLIPCONFIG(8)

HTML rendering created 2023-12-22 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH.