arptables-nft(8) — Linux manual page

NAME | SYNOPSIS | DESCRIPTION | ARPTABLES COMMAND LINE ARGUMENTS | NOTES | MAILINGLISTS | SEE ALSO | COLOPHON

ARPTABLES(8)             System Manager's Manual            ARPTABLES(8)

NAME         top

       arptables — ARP table administration (nft-based)

SYNOPSIS         top

       arptables [-t table] {-A|-D} chain rule-specification
       [options...]

       arptables [-t table] -I chain [rulenum] rule-specification

       arptables [-t table] -R chain rulenum rule-specification

       arptables [-t table] -D chain rulenum

       arptables [-t table] {-F|-L|-Z} [chain [rulenum]] [options...]

       arptables [-t table] -N chain

       arptables [-t table] -X [chain]

       arptables [-t table] -P chain policy

       arptables [-t table] -E old-chain-name new-chain-name

       rule-specification := [matches...] [target]

       match := -m matchname [per-match-options]

       target := -j targetname [per-target-options]

DESCRIPTION         top

       arptables is a user space tool, it is used to set up and maintain
       the tables of ARP rules in the Linux kernel. These rules inspect
       the ARP frames which they see.  arptables is analogous to the
       iptables user space tool, but arptables is less complicated.

   CHAINS
       The kernel table is used to divide functionality into different
       sets of rules. Each set of rules is called a chain.  Each chain
       is an ordered list of rules that can match ARP frames. If a rule
       matches an ARP frame, then a processing specification tells what
       to do with that matching frame. The processing specification is
       called a 'target'. However, if the frame does not match the
       current rule in the chain, then the next rule in the chain is
       examined and so forth.  The user can create new (user-defined)
       chains which can be used as the 'target' of a rule.

   TARGETS
       A firewall rule specifies criteria for an ARP frame and a frame
       processing specification called a target.  When a frame matches a
       rule, then the next action performed by the kernel is specified
       by the target.  The target can be one of these values: ACCEPT,
       DROP, CONTINUE, RETURN, an 'extension' (see below) or a user-
       defined chain.

       ACCEPT means to let the frame through.  DROP means the frame has
       to be dropped.  CONTINUE means the next rule has to be checked.
       This can be handy to know how many frames pass a certain point in
       the chain or to log those frames.  RETURN means stop traversing
       this chain and resume at the next rule in the previous (calling)
       chain.  For the extension targets please see the TARGET
       EXTENSIONS section of this man page.

   TABLES
       There is only one ARP table in the Linux kernel.  The table is
       filter.  You can drop the '-t filter' argument to the arptables
       command.  The -t argument must be the first argument on the
       arptables command line, if used.

       -t, --table
              filter, is the only table and contains two built-in
              chains: INPUT (for frames destined for the host) and
              OUTPUT (for locally-generated frames).

ARPTABLES COMMAND LINE ARGUMENTS         top

       After the initial arptables command line argument, the remaining
       arguments can be divided into several different groups.  These
       groups are commands, miscellaneous commands, rule-specifications,
       match-extensions, and watcher-extensions.

   COMMANDS
       The arptables command arguments specify the actions to perform on
       the table defined with the -t argument. If you do not use the -t
       argument to name a table, the commands apply to the default
       filter table.  With the exception of the -Z command, only one
       command may be used on the command line at a time.

       -A, --append
              Append a rule to the end of the selected chain.

       -D, --delete
              Delete the specified rule from the selected chain. There
              are two ways to use this command. The first is by
              specifying an interval of rule numbers to delete, syntax:
              start_nr[:end_nr]. Using negative numbers is allowed, for
              more details about using negative numbers, see the -I
              command. The second usage is by specifying the complete
              rule as it would have been specified when it was added.

       -I, --insert
              Insert the specified rule into the selected chain at the
              specified rule number.  If the current number of rules
              equals N, then the specified number can be between -N and
              N+1. For a positive number i, it holds that i and i-N-1
              specify the same place in the chain where the rule should
              be inserted. The number 0 specifies the place past the
              last rule in the chain and using this number is therefore
              equivalent with using the -A command.

       -R, --replace
              Replaces the specified rule into the selected chain at the
              specified rule number.  If the current number of rules
              equals N, then the specified number can be between 1 and
              N. i specifies the place in the chain where the rule
              should be replaced.

       -P, --policy
              Set the policy for the chain to the given target. The
              policy can be ACCEPT, DROP or RETURN.

       -F, --flush
              Flush the selected chain. If no chain is selected, then
              every chain will be flushed. Flushing the chain does not
              change the policy of the chain, however.

       -Z, --zero
              Set the counters of the selected chain to zero. If no
              chain is selected, all the counters are set to zero. The
              -Z command can be used in conjunction with the -L command.
              When both the -Z and -L commands are used together in this
              way, the rule counters are printed on the screen before
              they are set to zero.

       -L, --list
              List all rules in the selected chain. If no chain is
              selected, all chains are listed.

       -N, --new-chain
              Create a new user-defined chain with the given name. The
              number of user-defined chains is unlimited. A user-defined
              chain name has maximum length of 31 characters.

       -X, --delete-chain
              Delete the specified user-defined chain. There must be no
              remaining references to the specified chain, otherwise
              arptables will refuse to delete it. If no chain is
              specified, all user-defined chains that aren't referenced
              will be removed.

       -E, --rename-chain
              Rename the specified chain to a new name.  Besides
              renaming a user-defined chain, you may rename a standard
              chain name to a name that suits your taste. For example,
              if you like PREBRIDGING more than PREROUTING, then you can
              use the -E command to rename the PREROUTING chain. If you
              do rename one of the standard arptables chain names,
              please be sure to mention this fact should you post a
              question on the arptables mailing lists.  It would be wise
              to use the standard name in your post. Renaming a standard
              arptables chain in this fashion has no effect on the
              structure or function of the arptables kernel table.

   MISCELLANEOUS COMMANDS
       -V, --version
              Show the version of the arptables userspace program.

       -h, --help
              Give a brief description of the command syntax.

       -j, --jump target
              The target of the rule. This is one of the following
              values: ACCEPT, DROP, CONTINUE, RETURN, a target extension
              (see TARGET EXTENSIONS) or a user-defined chain name.

       -c, --set-counters PKTS BYTES
              This enables the administrator to initialize the packet
              and byte counters of a rule (during INSERT, APPEND,
              REPLACE operations).

   RULE-SPECIFICATIONS
       The following command line arguments make up a rule specification
       (as used in the add and delete commands). A "!" option before the
       specification inverts the test for that specification. Apart from
       these standard rule specifications there are some other command
       line arguments of interest.

       -s, --source-ip [!] address[/mask]
              The Source IP specification.

       -d, --destination-ip [!] address[/mask]
              The Destination IP specification.

       --source-mac [!] address[/mask]
              The source mac address. Both mask and address are written
              as 6 hexadecimal numbers separated by colons.

       --destination-mac [!] address[/mask]
              The destination mac address. Both mask and address are
              written as 6 hexadecimal numbers separated by colons.

       -i, --in-interface [!] name
              The interface via which a frame is received (for the INPUT
              chain). The flag --in-if is an alias for this option.

       -o, --out-interface [!] name
              The interface via which a frame is going to be sent (for
              the OUTPUT chain). The flag --out-if is an alias for this
              option.

       -l, --h-length length[/mask]
              The hardware length (nr of bytes)

       --opcode code[/mask]
              The operation code (2 bytes). Available values are:
              1=Request 2=Reply 3=Request_Reverse 4=Reply_Reverse
              5=DRARP_Request 6=DRARP_Reply 7=DRARP_Error
              8=InARP_Request 9=ARP_NAK.

       --h-type type[/mask]
              The hardware type (2 bytes, hexadecimal). Available values
              are: 1=Ethernet.

       --proto-type type[/mask]
              The protocol type (2 bytes). Available values are:
              0x800=IPv4.

   TARGET-EXTENSIONS
       arptables extensions are precompiled into the userspace tool. So
       there is no need to explicitly load them with a -m option like in
       iptables.  However, these extensions deal with functionality
       supported by supplemental kernel modules.

   mangle
       --mangle-ip-s IP address
              Mangles Source IP Address to given value.

       --mangle-ip-d IP address
              Mangles Destination IP Address to given value.

       --mangle-mac-s MAC address
              Mangles Source MAC Address to given value.

       --mangle-mac-d MAC address
              Mangles Destination MAC Address to given value.

       --mangle-target target
              Target of ARP mangle operation (DROP, CONTINUE or ACCEPT —
              default is ACCEPT).

   CLASSIFY
       This module allows you to set the skb->priority value (and thus
       classify the packet into a specific CBQ class).

       --set-class major:minor

              Set the major and minor  class  value.  The  values  are
              always interpreted as hexadecimal even if no 0x prefix is
              given.

   MARK
       This  module  allows you to set the skb->mark value (and thus
       classify the packet by the mark in u32)

       --set-mark mark
              Set the mark value. The  values  are  always interpreted
              as hexadecimal even if no 0x prefix is given

       --and-mark mark
              Binary AND the mark with bits.

       --or-mark mark
              Binary OR the mark with bits.

NOTES         top

       In this nft-based version of arptables, support for FORWARD chain
       has not been implemented. Since ARP packets are "forwarded" only
       by Linux bridges, the same may be achieved using FORWARD chain in
       ebtables.

MAILINGLISTS         top

       See http:https://netfilter.org/mailinglists.html 

SEE ALSO         top

       xtables-nft(8), iptables(8), ebtables(8), ip(8)

       See https://wiki.nftables.org 

COLOPHON         top

       This page is part of the iptables (administer and maintain packet
       filter rules) project.  Information about the project can be
       found at ⟨http:https://www.netfilter.org/⟩.  If you have a bug report
       for this manual page, see ⟨http:https://bugzilla.netfilter.org/⟩.  This
       page was obtained from the project's upstream Git repository
       ⟨git:https://git.netfilter.org/iptables⟩ on 2023-12-22.  (At that time,
       the date of the most recent commit that was found in the
       repository was 2023-12-21.)  If you discover any rendering
       problems in this HTML version of the page, or you believe there
       is a better or more up-to-date source for the page, or you have
       corrections or improvements to the information in this COLOPHON
       (which is not part of the original manual page), send a mail to
       [email protected]

                               March 2019                   ARPTABLES(8)

Pages that refer to this page: arptables-nft-restore(8)arptables-nft-save(8)xtables-nft(8)xtables-translate(8)