pmlogger(1) — Linux manual page

NAME | SYNOPSIS | DESCRIPTION | CONFIGURATION FILE SYNTAX | OPTIONS | EXAMPLES | HOSTNAME CHANGES | DIAGNOSTICS | FILES | ENVIRONMENT | PCP ENVIRONMENT | SEE ALSO | COLOPHON

PMLOGGER(1)              General Commands Manual             PMLOGGER(1)

NAME         top

       pmlogger - create an archive for performance metrics

SYNOPSIS         top

       pmlogger [-CLNoPruy?]  [-c conffile] [-d directory] [-h host] [-H
       hostname] [-I version] [-K spec] [-l logfile] [-m note] [-n
       pmnsfile] [-p pid] [-s endsize] [-t interval] [-T endtime] [-U
       username] [-v volsize] [-V version] [-x fd] archive

DESCRIPTION         top

       pmlogger creates the archives of performance metric values that
       may be ``played back'' by other Performance Co-Pilot (see
       PCPIntro(1)) tools.  These logs form the basis of the VCR
       paradigm and retrospective performance analysis services common
       to the PCP toolkit.

       The mandatory argument archive is the base name for the physical
       files that constitute an archive.  The archive argument may
       contain strftime(3) meta-characters, which will be substituted
       prior to creating the archive files.  When pmlogger is run as a
       service (see pmlogger_daily(1)), the standard archive base name
       template is %Y%m%d.%H.%M.

       The -V option specifies the version for the archive that is
       generated.  By default the archive version $PCP_ARCHIVE_VERSION
       (set to 3 in current PCP releases) is used, and the only values
       currently supported for version are 2 or 3.

       Unless directed to another host by the -h option or when directly
       using PMDAs via the -o option, pmlogger will contact the
       Performance Metrics Collector Daemon (PMCD) on the local host and
       use that as the source of the metric values to be logged.

       To support the required flexibility and control over what is
       logged and when, pmlogger maintains an independent two level
       logging state for each instance of each performance metric.  At
       the first (mandatory) level, logging is allowed to be on (with an
       associated interval between samples), or off or maybe.  In the
       latter case, the second (advisory) level logging is allowed to be
       on (with an associated interval between samples), or off.

       The mandatory level allows universal specification that some
       metrics must be logged, or must not be logged.  The default state
       for all instances of all metrics when pmlogger starts is
       mandatory maybe and advisory off.

       Use pmlc(1) to interrogate and change the logging state once
       pmlogger is running.

       If a metric's state is mandatory (on or off) and a request is
       made to change it to mandatory maybe, the new state is mandatory
       maybe and advisory off.  If a metric's state is already advisory
       (on or off) and a request is made to change it to mandatory
       maybe, the current state is retained.

       It is not possible for pmlogger to log specific instances of a
       metric and all instances of the same metric concurrently.  If
       specific instances are being logged and a request to log all
       instances is made, then all instances of the metric will be
       logged according to the new request, superseding any prior
       logging request for the metric.  A request to log all instances
       of a metric will supersede any previous request to log all
       instances.  A request to log specific instances of a metric when
       all instances are already being logged is refused.  To do this
       one must turn off logging for all instances of the metric first.
       In each case, the validity of the request is checked first; for
       example a request to change a metric's logging state to advisory
       on when it is currently mandatory off is never permitted (it is
       necessary to change the state to mandatory maybe first).

       Optionally, each system running pmcd(1) may also be configured to
       run a ``primary'' pmlogger instance.  This pmlogger instance is
       launched by $PCP_RC_DIR/pmlogger, and is affected by the files
       $PCP_SYSCONF_DIR/pmlogger/control,
       $PCP_SYSCONF_DIR/pmlogger/control.d/*, (use chkconfig(8),
       systemctl(1) or similar platform-specific commands to activate or
       disable the primary pmlogger instance),
       $PCP_SYSCONFIG_DIR/pmlogger (environment variable settings for
       the primary pmlogger) $PCP_SYSCONF_DIR/pmlogger/pmlogger.options
       (command line options passed to the primary pmlogger) and
       $PCP_VAR_DIR/config/pmlogger/config.default (the default initial
       configuration file for the primary pmlogger).

       The primary pmlogger instance is identified by the -P option.
       There may be at most one ``primary'' pmlogger instance on each
       system.  The primary pmlogger instance (if any) must be running
       on the same host as the pmcd(1) to which it connects (if any), so
       the -h and -P options are mutually exclusive.

       Logging of some metrics is possible even in the absence of a
       local pmcd(1), using the "local context" mode of operation.  This
       is activated using the -o option, and causes pmlogger to make use
       of local DSO PMDAs instead of communicating with pmcd(1).  When
       operating using a local context, the -K option may be used to
       control the DSO PMDAs that should be made accessible.  The spec
       argument conforms to the syntax described in pmSpecLocalPMDA(3).
       More than one -K option may be used.

       When launched as a non-primary instance, pmlogger will exit
       immediately if the configuration file causes no metric logging to
       be scheduled.  The -L option overrides this behavior, and causes
       a non-primary pmlogger instance to ``linger'', presumably pending
       some future dynamic re-configuration and state change via
       pmlc(1).  pmlogger will also linger without the -L option being
       used if all the metrics to be logged are logged as once only
       metrics.  When the once only metrics have been logged, a warning
       message will be generated stating that the event queue is empty
       and no more events will be scheduled.

       By default all diagnostics and errors from pmlogger are written
       to the file pmlogger.log in the directory where pmlogger is
       launched.  The -l option may be used to override the default
       behavior.  If the log file cannot be created or is not writable,
       output is written to standard error instead.  If the logfile for
       the -l option is "-" (i.e.  -l-) then log messages are written to
       the standard output stream.  This can be particularly useful when
       running pmlogger manually, rather than as a service daemon.

       The -N option directs pmlogger to notify a service manager,
       typically systemd(1), when it has started and is about to begin
       writing PCP archives.  This option would only normally be used
       when pmlogger is run as a daemon service under the control of a
       service manager.  For more details, see
       __pmServerNotifyServiceManagerReady(3) and systemd(1).  On
       platforms that do not use a service manager that supports
       notifications, the -N option is basically a no-op.

       If specified, the -s option instructs pmlogger to terminate after
       a certain size in records, bytes or time units has been
       accumulated.  If endsize is an integer then endsize records will
       be written to the archive.  If endsize is an integer suffixed by
       b or bytes then endsize bytes of the archive data will be written
       out (note, however, that archive record boundaries will not be
       broken and so this limit may be slightly surpassed).  Other
       viable file size units include: K, Kb, KiB, Kbyte, Kilobyte for
       kilobytes and M, Mb, MiB, Mbyte, Megabyte for megabytes and G,
       Gb, GiB, Gbyte, Gigabyte for gigabytes.  These units may be
       optionally suffixed by an s and may be of mixed case.
       Alternatively endsize may be an integer or a floating point
       number suffixed using a time unit as described in PCPIntro(1) for
       the interval argument (to the standard PCP -t command line
       option).
       Some examples of different formats:
          -s 100
          -s 100bytes
          -s 100K
          -s 100Mb
          -s 10Gbyte
          -s 10mins
          -s 1.5hours
       The default is for pmlogger to run forever.

       The -r option causes the size of the physical record(s) for each
       group of metrics and the expected contribution of the group to
       the size of the PCP archive for one full day of collection to be
       reported in the log file.  This information is reported the first
       time each group is successfully written to the archive.

       The -U option specifies the user account under which to run
       pmlogger.  The default is the current user account for
       interactive use.  When run as a daemon, the unprivileged "pcp"
       account is used in current versions of PCP, but in older versions
       the superuser account ("root") was used by default.

       The archive is potentially a multi-volume data set, and the -v
       option causes pmlogger to start a new volume after a certain size
       in records, bytes, or time units has been accumulated for the
       current volume.  The format of this size specification is
       identical to that of the -s option (see above).  The default is
       for pmlogger to create a single volume archive.  Additional
       volume switches can also be forced asynchronously by either using
       pmlc(1) or sending pmlogger a SIGHUP signal (see below).  Note,
       if a scheduled volume switch is in operation due to the -v
       option, then its counters will be reset after an asynchronous
       switch.

       Independent of any -v option, each volume of an archive is
       limited to no more than 2^31 bytes, so pmlogger will
       automatically create a new volume for the archive before this
       limit is reached.

       Normally pmlogger operates on the distributed Performance Metrics
       Name Space (PMNS), however if the -n option is specified an
       alternative local PMNS is loaded from the file pmnsfile.

       Under normal circumstances, pmlogger will run forever (except for
       a -s option or a termination signal).  The -T option may be used
       to limit the execution time using the format of time as
       prescribed by PCPIntro(1).  The time is interpreted within the
       time zone of the PMCD server, unless the -y option is given,
       within which case the time zone at this logger host is used.
       Some examples of different formats:
          -T 10mins
          -T '@ 11:30'
       From this it can be seen that -T 10mins and -s 10mins perform
       identical actions.

       Alternatively, pmlogger runtime may be limited to the lifetime of
       another process by using the -p or --PID option to nominate the
       PID of the process of interest.  In this case the pmlogger will
       exit when the other process no longer exists.

       When pmlogger receives a SIGHUP signal, the current volume of the
       archive is closed, and a new volume is opened.  This mechanism
       (or the alternative mechanism via pmlc(1)) may be used to manage
       the growth of the archive files - once a log volume is closed,
       that file may be archived without ill-effect on the continued
       operation of pmlogger.  See also the -v option above.

       When pmlogger receives a SIGUSR2 signal, the current archive is
       closed, and a new archive is opened.  For this to succeed, the
       original archive argument must include strftime(3) meta
       characters (e.g.  %Y%m%d.%H.%M), otherwise pmlogger will exit
       because the archive files will already exist and pmlogger will
       not over-write existing archive files.  Note that SIGUSR2
       triggers pmlogger to re-exec itself and re-parse all original
       arguments.  This means that any relative time limits placed on
       it's termination time or sampling limit are reset and begin
       again.  This only affects relative termination times, not
       absolute times e.g.  -T 5s is affected, but -T 5pm is not.

       Historically the buffers for the current archive may be flushed
       to disk using the flush command of pmlc(1), or by using the -u
       option.  The current version of pmlogger and the libpcp routines
       that underpin pmlogger unconditionally use unbuffered writes and
       a single fwrite(3) for each logical record written, and so
       ``flushing'' does not force any additional data to be written to
       the file system.  The -u option and the pmlc(1) flush command are
       retained for backwards compatibility.

       When launched with the -x option, pmlogger will accept
       asynchronous control requests on the file descriptor fd.  This
       option is only expected to be used internally by PCP applications
       that support ``live record mode''.

       The -m option allows the string note to be appended to the map
       file for this instance of pmlogger in the $PCP_TMP_DIR/pmlogger
       directory.  This is currently used internally to document the
       file descriptor (fd) when the -x option is used, or to indicate
       that this pmlogger instance was started under the control of
       pmlogger_check(1), (-m pmlogger_check) or was re-exec'd (see
       execvp(3)) due to a SIGUSR2 signal being recieved as described
       above (-m reexec).

       The -H option allows the hostname written into the archive label
       to be overridden.  This mirrors the -H option of pmcd(1) , but
       allows it to be specified on the pmlogger process.  Without this
       option, the value returned from the logged pmcd(1) is used.

       The -C option will cause the configuration file to be parsed and
       pmlogger will then exit without creating an output archive, so
       when -C is specified, the archive command line argument is not
       required.  Any errors in the configuration file are reported.

       The -d or --directory option may be used to specify the directory
       where the archive should be created.  directory may include sh(1)
       metacharacters, like $(...)  or `...` or $var and pmlogger will
       expand these to produce a final directory path.  The resultant
       path must be absolute, not relative.  The -d option is intended
       primarily for use by pmlogger_check(1) and normal users would not
       typically need to use the option, as the directory for archive is
       either implied by archive if it contains directory components
       else the current directory by default.

CONFIGURATION FILE SYNTAX         top

       The configuration file may be specified with the -c option.  If
       it is not, configuration specifications are read from standard
       input.

       If conffile does not exist, then a search is made in the
       directory $PCP_VAR_DIR/config/pmlogger for a file of the same
       name, and if found that file is used, e.g. if config.mumble does
       not exist in the current directory and the file
       $PCP_VAR_DIR/config/pmlogger/config.mumble does exist, then -c
       config.mumble and -c $PCP_VAR_DIR/config/pmlogger/config.mumble
       are equivalent.

       The syntax for the configuration file is as follows.

       1.   Words are separated by white space (space, tab or newline).

       2.   The symbol ``#'' (hash) introduces a comment, and all text
            up to the next newline is ignored.

       3.   Keywords (shown in bold below) must appear literally (i.e.
            in lower case).

       4.   Each specification begins with the optional keyword log,
            followed by one of the states mandatory on, mandatory off,
            mandatory maybe, advisory on or advisory off.

       5.   For the on states, a logging interval must follow using the
            syntax ``once'', or ``default'', or ``every N timeunits'',
            or simply ``N timeunits'' - N is an unsigned integer, and
            timeunits is one of the keywords msec, millisecond, sec,
            second, min, minute, hour or the plural form of one of the
            above.
            Internal limitations require the interval to be smaller than
            (approximately) 74 hours.  An interval value of zero is a
            synonym for once.  An interval of default means to use the
            default logging interval of 60 seconds; this default value
            may be changed to interval with the -t command line option.

            The interval argument follows the syntax described in
            PCPIntro(1), and in the simplest form may be an unsigned
            integer (the implied units in this case are seconds).

       6.   Following the state and possible interval specifications
            comes a ``{'', followed by a list of one or more metric
            specifications and a closing ``}''.  The list is white space
            (or comma) separated.  If there is only one metric
            specification in the list, the braces are optional.

       7.   A metric specification consists of a metric name optionally
            followed by a set of instance names.  The metric name
            follows the standard PCP naming conventions, see PMNS(5),
            and if the metric name is a non-leaf node in the PMNS (see
            PMNS(5)), then pmlogger will recursively descend the PMNS
            and apply the logging specification to all descendent metric
            names that are leaf nodes in the PMNS.  The set of instance
            names is a ``['', followed by a list of one or more space
            (or comma) separated names, numbers or strings, and a
            closing ``]''.  Elements in the list that are numbers are
            assumed to be internal instance identifiers, other elements
            are assumed to be external instance identifiers - see
            pmGetInDom(3) for more information.

            If no instances are given, then the logging specification is
            applied to all instances of the associated metric.

       8.   There may be an arbitrary number of logging specifications.

       9.   As of PCP version 4.0 and later, any metric name
            specification that does not resolve to a leaf node in the
            PMNS is added to an internal list of possible dynamic
            subtree roots.  PMDAs can dynamically create new metrics
            below a dynamic root node in their PMNS, and send a
            notification to clients that the PMNS has changed, see
            pmdaExtSetFlags(3) and in particular the METRIC CHANGES
            section for API details.  This mechanism is currently
            supported by pmdaopenmetrics(1) and pmdammv(1).  When a
            fetch issued by pmlogger returns with the
            PMDA_EXT_NAMES_CHANGE flag set, pmlogger will traverse the
            internal list of possible dynamic subtree nodes and
            dynamically discover any new metrics.  In effect, as of PCP
            version 4.0 and later, pmlogger can be configured to
            dynamically log new metrics that appear in the future, after
            the configuration file is initially parsed.

       10.  Following all of the logging specifications, there may be an
            optional access control section, introduced by the literal
            token [access].  Thereafter come access control rules that
            allow or disallow operations from particular hosts or groups
            of hosts.

            The operations may be used to interrogate or control a
            running pmlogger using pmlc(1) and fall into the following
            classes:

            enquire
                   interrogate the status of pmlogger and the metrics it
                   is logging
            advisory
                   Change advisory logging.
            mandatory
                   Change mandatory logging.
            all    All of the above.

            Access control rules are of the form ``allow hostlist :
            operationlist ;'' and ``disallow hostlist : operationlist
            ;''.

            The hostlist follows the syntax and semantics for the access
            control mechanisms used by PMCD and are fully documented in
            pmcd(1).  An operationslist is a comma separated list of the
            operations advisory, mandatory, enquire and all.

            A missing [access] section allows all access and is
            equivalent to allow * : all;.

       The configuration (either from standard input or conffile) is
       initially scanned by pmcpp(1) with the options -rs and -I
       $PCP_VAR_DIR/config/pmlogger.  This extends the configuration
       file syntax with include file processing (%include), a common
       location to search for include files
       ($PCP_VAR_DIR/config/pmlogger), macro definitions (%define),
       macro expansion (%name and %{name}) and conditional inclusion of
       lines (%ifdef name ... %else ... %endif and %ifndef name ...
       %else ... %endif).

OPTIONS         top

       The available command line options are:

       -c conffile, --config=conffile
            Specify the conffile file to use.

       -C, --check
            Parse configuration and exit.

       -h host, --host=host
            Fetch performance metrics from pmcd(1) on host, rather than
            from the default localhost.

       -H hostname, --labelhost=hostname
            Specify the hostname to use instead of the one returned by
            pmcd(1).

       -I version, --pmlc-ipc-version=version
            Normally, pmlogger and pmlc(1) will autonegotiate a mutually
            acceptable version for their private IPC channel.  Use -I to
            force pmlogger to offer (at most) version as the version to
            be used.  This option may be required if pmlogger needs to
            be managed by an older version of pmlc(1) that fails to
            autonegotiate correctly.

       -K spec, --spec-local=spec
            When fetching metrics from a local context (see -o), the -K
            option may be used to control the DSO PMDAs that should be
            made accessible.  The spec argument conforms to the syntax
            described in pmSpecLocalPMDA(3).  More than one -K option
            may be used.

       -l logfile, --log=logfile
            Write all diagnostics to logfile instead of the default
            pmlogger.log.

       -L, --linger
            Run even if not the primary logger instance and nothing to
            log.

       -m note, --note=note
            Append note to the port map file for this instance.

       -n pmnsfile, --namespace=pmnsfile
            Load an alternative Performance Metrics Name Space (PMNS(5))
            from the file pmnsfile.

       -N, --notify
            Notify service manager such as systemd(1) as needed.

       -o, --local-PMDA
            Use a local context to collect metrics from DSO PMDAs on the
            local host without PMCD.  See also -K.

       -p PID, --PID=PID
            Log specified metrics for the lifetime of the pid PID.

       -P, --primary
            Run as primary logger instance.  See above for more detailed
            description of this.

       -r, --report
            Report record sizes and archive growth rate.

       -s endsize, --size=endsize
            Terminate after archive size exceeds endsize.

       -t interval, --interval=interval
            Specify the logging interval.  The default value is 60
            seconds.  Please refer to the ENVIRONMENT and FILES sections
            below regarding the PMLOGGER_INTERVAL environment variable
            and its impact on the default logging interval.

       -T endtime, --finish=endtime
            Specify the endtime when to end logging.

       -u   Use unbuffered output.  This is the default (so this option
            does nothing).

       -U username, --username=username
            When in daemon mode, run as user username.

       -v volsize, --volsize=volsize
            Switch volumes after reaching archive volume size volsize.

       -V version, --version=version
            Specify archive version.  The default and the only accepted
            value is 2.

       -x fd
            Allow asynchronous control requests on the file descriptor
            fd.

       -y   Use local timezone instead of the timezone from the pmcd(1)
            host.

       -?, --help
            Display usage message and exit.

EXAMPLES         top

       For each PCP utility, there is a sample pmlogger configuration
       file that could be used to create an archive suitable for
       replaying with that tool (i.e. includes all of the performance
       metrics used by the tool).  For a tool named foo this
       configuration file is located in
       $PCP_VAR_DIR/config/pmlogger/config.foo.

       The following is a simple default configuration file for a
       primary pmlogger instance, and demonstrates most of the
       capabilities of the configuration specification language.

            log mandatory on once { hinv.ncpu hinv.ndisk }
            log mandatory on every 10 minutes {
                disk.all.write
                disk.all.read
                network.interface.in.packets [ "et0" ]
                network.interface.out.packets [ "et0" ]
                nfs.server.reqs [ "lookup" "getattr" "read" "write" ]
            }

            log advisory on every 30 minutes {
                environ.temp
                pmcd.pdu_in.total
                pmcd.pdu_out.total
            }

            %include "macros.default"

            %ifdef %disk_detail
            log mandatory on %disk_detail_freq {
                disk.dev
            }
            %endif

            [access]
            disallow * : all except enquire;
            allow localhost : mandatory, advisory;

HOSTNAME CHANGES         top

       The hostname of the PMCD that is providing metrics to pmlogger is
       used in several ways.

       PMCD's hostname (or the argument from the -H option) is included
       in the archive label and may be used to ensure that subsequent
       operations on multiple archives, e.g. pmlogextract(1), are only
       applied to archives from the same host.

       For pmlogger instances using a local PMCD that are launched and
       managed by pmlogger_check(1) and pmlogger_daily(1), (or the
       systemd(1) or cron(8) services that use these scripts), the local
       hostname may also be used to construct the name of a directory
       where all the archives for the one host are stored, e.g.
       $PCP_ARCHIVE_DIR/<hostname>.

       And PMCD's hostname is also stored in the archive via the
       pmcd.pmlogger.hostname metric that is used as part of the checks
       to ensure that there is continuity of performance data after the
       nightly archive rotation by pmlogger_daily(1).

       The hostname of the PMCD host may change during boot time when
       the system transitions from a temporary hostname to a persistent
       hostname, or by explicit administrative action anytime after the
       system has been booted.  When this happens, pmlogger may need to
       take special action, specifically if the pmlogger instance was
       launched from pmlogger_check(1) or pmlogger_daily(1), then
       pmlogger must exit.  Under normal circumstances systemd(1) or
       cron(8) will launch a new pmlogger shortly thereafter, and this
       new pmlogger instance will be operating in the context of the new
       hostname for the host where PMCD is running.

DIAGNOSTICS         top

       The archives are sufficiently precious that pmlogger will not
       truncate an existing physical file.  A message of the form
        ...: "foo.index" already exists, not over-written
        ...: File exists
       indicates this situation has arisen.  You must explicitly remove
       the files and launch pmlogger again.

       There may be at most one primary pmlogger instance per monitored
       host; attempting to bend this rule produces the error:
        pmlogger: there is already a primary pmlogger running

       Various other messages relating to the creation and/or deletion
       of files in $PCP_TMP_DIR/pmlogger suggest a permission problem on
       this directory, or some feral files have appeared therein.

FILES         top

       archive.meta
            metadata (metric descriptions, instance domains, etc.) for
            the archive

       archive.0
            initial volume of metrics values (subsequent volumes have
            suffixes 1, 2, ...)

       archive.index
            temporal index to support rapid random access to the other
            files in the archive

       $PCP_TMP_DIR/pmlogger
            pmlogger maintains the files in this directory as the map
            between the process id of the pmlogger instance and the IPC
            port that may be used to control each pmlogger instance (as
            used by pmlc(1))

       $PCP_VAR_DIR/config/pmlogger/config.default
            default configuration file for the primary logger instance
            launched from $PCP_RC_DIR/pmlogger

       $PCP_VAR_DIR/config/pmlogger/config.*
            assorted configuration files suitable for creating logs that
            may be subsequently replayed with the PCP visualization and
            monitoring tools

       $PCP_ARCHIVE_DIR/<hostname>
            Default directory for PCP archive files for performance
            metric values collected from the host <hostname>.

       $PCP_SYSCONFIG_DIR/pmlogger
            additional environment variables that will be set when the
            primary pmlogger instance executes.  Only settings of the
            form "PMLOGGER_VARIABLE=value" will be honoured.

       ./pmlogger.log
            (or $PCP_ARCHIVE_DIR/<hostname>/pmlogger.log when started
            automatically by either $PCP_RC_DIR/pmlogger or one of the
            pmlogger(1) monitoring scripts such as pmlogger_check(1))
            all messages and diagnostics are directed here

ENVIRONMENT         top

       Normally pmlogger creates a socket to receive control messages
       from pmlc(1) on the first available TCP/IP port numbered 4330 or
       higher.  The environment variable PMLOGGER_PORT may be used to
       specify an alternative starting port number.

       If set to the value 1, the PMLOGGER_LOCAL environment variable
       will cause pmlogger to run in a localhost-only mode of operation,
       where it binds only to the loopback interface.

       The PMLOGGER_REQUEST_TIMEOUT variable may be set by applications
       such as pmlc(1) to specify a timeout in seconds for connection
       requests to the pmlogger control port.  If not set, connections
       may block indefinitely.  This variable would not normally be set
       by pmlogger itself.

       The PMLOGGER_MAXPENDING variable can be set to indicate the
       maximum length to which the queue of pending pmlc connections may
       grow.

       The default sampling interval used by pmlogger can be set using
       the PMLOGGER_INTERVAL variable (if not set, 60 seconds will be
       used).  Both the command line and directives in the configuration
       file will override this value.  It is an integer in units of
       seconds.

       On platforms using systemd(1), and when the -N option is given,
       the NOTIFY_SOCKET environment variable would normally be set by
       the service manager prior to launching pmlogger.

PCP ENVIRONMENT         top

       Environment variables with the prefix PCP_ are used to
       parameterize the file and directory names used by PCP.  On each
       installation, the file /etc/pcp.conf contains the local values
       for these variables.  The $PCP_CONF variable may be used to
       specify an alternative configuration file, as described in
       pcp.conf(5).

SEE ALSO         top

       PCPIntro(1), pmcd(1), pmdumplog(1), pmlc(1), pmlogger_check(1),
       pmlogger_daily(1), systemctl(1), systemd(1), execvp(3), PMAPI(3),
       __pmServerNotifyServiceManagerReady(3), pmSpecLocalPMDA(3),
       strftime(3), pcp.conf(5), pcp.env(5), pmlogger(5), PMNS(5),
       chkconfig(8) and cron(8).

COLOPHON         top

       This page is part of the PCP (Performance Co-Pilot) project.
       Information about the project can be found at 
       ⟨http:https://www.pcp.io/⟩.  If you have a bug report for this manual
       page, send it to [email protected].  This page was obtained from the
       project's upstream Git repository
       ⟨https://github.com/performancecopilot/pcp.git⟩ on 2023-12-22.
       (At that time, the date of the most recent commit that was found
       in the repository was 2023-12-16.)  If you discover any rendering
       problems in this HTML version of the page, or you believe there
       is a better or more up-to-date source for the page, or you have
       corrections or improvements to the information in this COLOPHON
       (which is not part of the original manual page), send a mail to
       [email protected]

Performance Co-Pilot               PCP                       PMLOGGER(1)

Pages that refer to this page: ganglia2pcp(1)iostat2pcp(1)mrtg2pcp(1)pcp(1)pcp-atop(1)pcp-atopsar(1)pcpcompat(1)pcp-dstat(1)pcp-geolocate(1)pcpintro(1)pcp-iostat(1)pcp-ss(1)pcp-tapestat(1)pmcd(1)pmchart(1)pmcpp(1)pmdanvidia(1)pmdaopenmetrics(1)pmdasockets(1)pmdatrace(1)pmdiff(1)pmdumptext(1)pmfind(1)pmfind_check(1)pmie(1)pmie_check(1)pmlc(1)pmlogcheck(1)pmlogconf(1)pmlogctl(1)pmlogdump(1)pmlogextract(1)pmlogger(1)pmlogger_check(1)pmlogger_daily(1)pmlogger_daily_report(1)pmlogger_merge(1)pmlogger_rewrite(1)pmloglabel(1)pmlogmv(1)pmlogreduce(1)pmlogrewrite(1)pmlogsize(1)pmlogsummary(1)pmproxy(1)pmsearch(1)pmseries(1)pmsnap(1)pmstat(1)pmval(1)pmview(1)sar2pcp(1)sheet2pcp(1)logimport(3)pcpintro(3)__pmaf(3)pmapi(3)__pmconnectlogger(3)__pmcontrollog(3)pmdestroycontext(3)pmdiscoversetup(3)pmdupcontext(3)pmgetarchiveend(3)pmgetarchivelabel(3)pmnewcontext(3)pmrecord(3)pmsearchinfo(3)pmsearchsetup(3)pmsearchtextindom(3)pmsearchtextquery(3)pmsearchtextsuggest(3)pmseriesdescs(3)pmseriesquery(3)pmseriessetup(3)pmtrimnamespace(3)pmusecontext(3)pmwebapi(3)pmwhichcontext(3)LOGARCHIVE(5)pmlogger.control(5)