We report an effect involving hydrogen (H2)-plasma-treated nanoporous TiO2(H-TiO2) photocatalysts... more We report an effect involving hydrogen (H2)-plasma-treated nanoporous TiO2(H-TiO2) photocatalysts that improve photocatalytic performance under solar-light illumination. H-TiO2 photocatalysts were prepared by application of hydrogen plasma of assynthesized TiO2(a-TiO2) without annealing process. Compared with the a-TiO2, the H-TiO2 exhibited high anatase/brookite bicrystallinity and a porous structure. Our study demonstrated that H2 plasma is a simple strategy to fabricate H-TiO2 covering a large surface area that offers many active sites for the extension of the adsorption spectra from ultraviolet (UV) to visible range. Notably, the H-TiO2 showed strong ·OH free-radical generation on the TiO2 surface under both UV- and visible-light irradiation with a large responsive surface area, which enhanced photocatalytic efficiency. Under solar-light irradiation, the optimized H-TiO2 120(H2-plasma treatment time: 120 min) photocatalysts showed unprecedentedly excellent removal capability for...
We have successfully controlled the number of graphene layers (n-layer) by using a Cu–Ni–MgO hete... more We have successfully controlled the number of graphene layers (n-layer) by using a Cu–Ni–MgO hetero catalyst having a different catalytic activity and carbon solubility.
Small (Weinheim an der Bergstrasse, Germany), Jan 20, 2015
Recently, the appeal of 2D black phosphorus (BP) has been rising due to its unique optical and el... more Recently, the appeal of 2D black phosphorus (BP) has been rising due to its unique optical and electronic properties with a tunable band gap (≈0.3-1.5 eV). While numerous research efforts have recently been devoted to nano- and optoelectronic applications of BP, no attention has been paid to promising medical applications. In this article, the preparation of BP-nanodots of a few nm to <20 nm with an average diameter of ≈10 nm and height of ≈8.7 nm is reported by a modified ultrasonication-assisted solution method. Stable formation of nontoxic phosphates and phosphonates from BP crystals with exposure in water or air is observed. As for the BP-nanodot crystals' stability (ionization and persistence of fluorescent intensity) in aqueous solution, after 10 d, ≈80% at 1.5 mg mL(-1) are degraded (i.e., ionized) in phosphate buffered saline. They showed no or little cytotoxic cell-viability effects in vitro involving blue- and green-fluorescence cell imaging. Thus, BP-nanodots can b...
Few-layer black phosphorus (BP) is the most promising material among the two-dimensional material... more Few-layer black phosphorus (BP) is the most promising material among the two-dimensional materials due to its layered structure and the excellent semiconductor properties. Currently, thin BP atomic layers are obtained mostly by mechanical exfoliation of bulk BP, which limits applications in thin-film based electronics due to a scaling process. Here we report highly crystalline few-layer black phosphorus thin films produced by liquid exfoliation. We demonstrate that the liquid-exfoliated BP forms a triangular crystalline structure on SiO 2 /Si (001) and amorphous carbon. The highly crystalline BP layers are faceted with a preferred orientation of the (010) plane on the sharp edge, which is an energetically most favorable facet according to the density functional theory calculations. Our results can be useful in understanding the triangular BP structure for large-area applications in electronic devices using twodimensional materials. The sensitivity and selectivity of liquid-exfoliated BP to gas vapor demonstrate great potential for practical applications as sensors.
We report a facile method for preparing hybrid nanostructured films composed of poly(3-hexlythiop... more We report a facile method for preparing hybrid nanostructured films composed of poly(3-hexlythiophene) (P3HT) and [6,6]-phenylC61-butyric acid methyl ester (PCBM) with silver (Ag) nanorods (AgNRs) array. The AgNRs were synthesized by an electrochemical deposition method using an anodic aluminum oxide template with 50-nm-pore-diameter and 10-mu m-thickness. The nanostructured P3HT/PCBM film was formed by the intercalation of AgNRs into the P3HT/PCBM film. The nanostructured P3HT/PCBM film with AgNRs showed enhanced optical absorption in the spectral range of 300-650 nm due to localized surface plasmon resonance and scattering effects around the AgNRs compared with spin-coated and nanopatterned P3HT/PCBM films without AgNRs.
The current-voltage characteristics and the carrier-transport mechanism of the Er-silicide (ErSi1... more The current-voltage characteristics and the carrier-transport mechanism of the Er-silicide (ErSi1.7) Schottky contacts to strained-silicon-on-insulator (sSOI) and silicon-on-insulator (SOI) were investigated. Barrier heights of 0.74 eV and 0.82 eV were obtained for the sSOI and SOI structures, respectively. The barrier height of the sSOI structure was observed to be lower than that of the SoI structure despite the formation of a Schottky contact using the same metal silicide. The sSOI structure exhibited better rectification and higher current level than the SOI structure, which could be associated with a reduction in the band gap of Si caused by strain. The generation-recombination mechanism was found to be dominant in the forward bias for both structures. Carrier generation along with the Poole-Frenkel mechanism dominated the reverse-biased current in the SOI structure. The saturation tendency of the reverse leakage current in the sSOI structure could be attributed to strain-induced defects at the interface in non-lattice-matched structures.
Owing to the possibilities of achieving high theoretical energy density and gravimetric capacity,... more Owing to the possibilities of achieving high theoretical energy density and gravimetric capacity, sulfur has been considered as a promising cathode material for rechargeable lithium batteries. However, sulfur shows rapid capacity fading due to the irreversible loss of soluble polysulfides and the decrease in active sites needed for conducting agents. Furthermore, the low electrical conductivity of sulfur hampers the full utilization of active materials. Here we report that graphene oxide coated sulfur composites (GO-S/CB) exhibit improved electrochemical stability as well as enhanced rate performance, evidenced by various electrochemical analyses. The cyclic voltammetry and the galvanostatic cycling analysis revealed that the GO plays key roles in homogenizing the nanocomposite structures of the electrodes, in improving the electrochemical contact, and in minimizing the loss of soluble polysulfide intermediates. An electrochemical impedance spectroscopy analysis also confirms the enhanced structural stability of the GO-S/CB composites after battery operation. As a result, the GO-S/CB exhibited excellent cycle stability and specific capacity as high as ∼723.7 mA h g(-1) even after 100 cycles at 0.5 C.
The design of DNA nanostructures is of fundamental importance, the intrinsic value of DNA as a bu... more The design of DNA nanostructures is of fundamental importance, the intrinsic value of DNA as a building-block material lies in its ability to organize other bio-molecules with nanometer-scale spacing. Here, we report the fabrication of DNA scaffolds with nano-pores (< 10 nm size) that formed easily without the use of additives (i.e., avidin, biotin, polyamine, or inorganic materials) into large scale DNA nanostructures by controlling buffer pH and reaction temperature. Large scale DNA scaffolds with porous structures are stable and uniform at slightly acidic buffer pH values (pH 5.5) and at approximately room temperature (∼ 30 C). The depth of the DNA scaffolds with randomly porous size (< 10 nm) was a maximum of approximately 8 nm. Protein immobilization results also confirmed that a fibronectin (FN) proteins/large scale DNA scaffolds/aminopropylytriethoxysilane (APS)/SiO 2 /Si substrate with high sensitivity formed in a well-defined manner. The DNA scaffolds can be applied for use with DNA based biochips, biophysics, and cell biology.
The interface formation between Ba0.6Sr0.4TiO3 and Al2O3 has been studied using photoelectron spe... more The interface formation between Ba0.6Sr0.4TiO3 and Al2O3 has been studied using photoelectron spectroscopy with in situ sample preparation. A negligible valence band discontinuity, corresponding to a ~5.6 eV barrier for electron transport at the BST/Al2O3 interface is determined. Current-voltage measurements show that the leakage current can be significantly reduced by inserting the Al2O3 barrier layer between barium strontium titanate (BST)
It is known that water purified by conventional TiO2 photocatalysts may not be safe enough for dr... more It is known that water purified by conventional TiO2 photocatalysts may not be safe enough for drinking, due to the toxicity by tiny existence of TiO2 nanoparticles after water treatment. We herein demonstrate a facile design of a three-dimensional (3D) TiO2 photocatalyst structure with which both the efficiency of purification and the safety level of the final purified water can be improved and ensured, respectively. The structure, consisting of 3D sulfur-doped TiO2 microtubes in nanotubes (eco-TiO2), is suitable for both environmental and bio-medical applications. Investigation of its formation mechanism reveals that anodic aluminum oxide (AAO), owing to a spatial constraint, causes a simple, nanoparticles-to-nanotubes structural rearrangement as a template for nanotube growth. It is found that eco-TiO2 can be activated under visible-light irradiation by non-metal (sulfur; S) doping, after which it shows visible-light photocatalytic activities over a range of solar energy. Importantly, an in vitro cytotoxicity test of well-purified water by eco-TiO2 confirms that eco-TiO2 satisfies the key human safety conditions.
Over the past few decades, two-dimensional (2D) and layered materials have emerged as new fields.... more Over the past few decades, two-dimensional (2D) and layered materials have emerged as new fields. Due to the zero-band-gap nature of graphene and the low photocatalytic performance of MoS2, more advanced semiconducting 2D materials have been prompted. As a result, semiconductor black phosphorus (BP) is a derived cutting-edge post-graphene contender for nanoelectrical application, because of its direct-band-gap nature. For the first time, we report on robust BP@TiO2 hybrid photocatalysts offering enhanced photocatalytic performance under light irradiation in environmental and biomedical fields, with negligible affected on temperature and pH conditions, as compared with MoS2@TiO2 prepared by the identical synthesis method. Remarkably, in contrast to pure few layered BP, which, due to its intrinsic sensitivity to oxygen and humidity was readily dissolved after just several uses, the BP@TiO2 hybrid photocatalysts showed a ~92% photocatalytic activity after 15 runs. Thus, metal-oxide-sta...
Using a simple method of mass production of green carbon nanotags (G-tags) from harmful cyanobact... more Using a simple method of mass production of green carbon nanotags (G-tags) from harmful cyanobacteria, we developed an advanced and efficient imaging platform for the purpose of anticancer therapy. Approximately 100 grams of G-tags per 100 kilograms of harmful cyanobacteria were prepared using our eco-friendly approach. The G-tags possess high solubility, excellent photostability, and low cytotoxicity (<1.5 mg/mL for 24 h). Moreover, doxorubicin-conjugated G-tags (T-tags; >0.1 mg/mL) induced death in cancer cells (HepG2 and MCF-7) in-vitro at a higher rate than that of only G-tags while in-vivo mice experiment showed enhanced anticancer efficacy by T-tags at 0.01 mg/mL, indicating that the loaded doxorubicin retains its pharmaceutical activity. The cancer cell uptake and intracellular location of the G- and T-tags were observed. The results indicate that these multifunctional T-tags can deliver doxorubicin to the targeted cancer cells and sense the delivery of doxorubicin by a...
Materials science & engineering. C, Materials for biological applications, 2014
This study evaluates the utility of an antibacterial microneedle composed of green tea (GT) extra... more This study evaluates the utility of an antibacterial microneedle composed of green tea (GT) extract and hyaluronic acid (HA), for the efficient delivery of GT. These microneedles have the potential to be a patient-friendly method for the conventional sustained release of drugs. In this study, a fabrication method using a mold-based technique to produce GT/HA microneedles with a maximum area of ~50mm(2) with antibacterial properties was used to manufacture transdermal drug delivery systems. Fourier transform infrared (FTIR) spectrometry was carried out to observe the potential modifications in the microneedles, when incorporated with GT. The degradation rate of GT in GT/HA microneedles was controlled simply by adjusting the HA composition. The effects of different ratios of GT in the HA microneedles were determined by measuring the release properties. In HA microneedles loaded with 70% GT (GT70), a continuous higher release rate was sustained for 72h. The in vitro cytotoxicity assays...
To obtain adsorbents with high capacities for removing heavy metals and organic pollutants capabl... more To obtain adsorbents with high capacities for removing heavy metals and organic pollutants capable of quick magnetic separation, we fabricated unique sea-urchin-like magnetic iron oxide (mixed γ-Fe2O3/Fe3O4 phase) nanostructures (called u-MFN) with large surface areas (94.1m(2) g(-1)) and strong magnetic properties (57.9 emu g(-1)) using a simple growth process and investigated their potential applications in water treatment. The u-MFN had excellent removal capabilities for the heavy metals As(V) (39.6 mg g(-1)) and Cr(VI) (35.0 mg g(-1)) and the organic pollutant Congo red (109.2 mg g(-1)). The u-MFN also displays excellent adsorption of Congo red after recycling. Because of its high adsorption capacity, fast adsorption rate, and quick magnetic separation from treated water, the u-MFN developed in the present study is expected to be an efficient magnetic adsorbent for heavy metals and organic pollutants in aqueous solutions.
We report an effect involving hydrogen (H2)-plasma-treated nanoporous TiO2(H-TiO2) photocatalysts... more We report an effect involving hydrogen (H2)-plasma-treated nanoporous TiO2(H-TiO2) photocatalysts that improve photocatalytic performance under solar-light illumination. H-TiO2 photocatalysts were prepared by application of hydrogen plasma of assynthesized TiO2(a-TiO2) without annealing process. Compared with the a-TiO2, the H-TiO2 exhibited high anatase/brookite bicrystallinity and a porous structure. Our study demonstrated that H2 plasma is a simple strategy to fabricate H-TiO2 covering a large surface area that offers many active sites for the extension of the adsorption spectra from ultraviolet (UV) to visible range. Notably, the H-TiO2 showed strong ·OH free-radical generation on the TiO2 surface under both UV- and visible-light irradiation with a large responsive surface area, which enhanced photocatalytic efficiency. Under solar-light irradiation, the optimized H-TiO2 120(H2-plasma treatment time: 120 min) photocatalysts showed unprecedentedly excellent removal capability for...
We have successfully controlled the number of graphene layers (n-layer) by using a Cu–Ni–MgO hete... more We have successfully controlled the number of graphene layers (n-layer) by using a Cu–Ni–MgO hetero catalyst having a different catalytic activity and carbon solubility.
Small (Weinheim an der Bergstrasse, Germany), Jan 20, 2015
Recently, the appeal of 2D black phosphorus (BP) has been rising due to its unique optical and el... more Recently, the appeal of 2D black phosphorus (BP) has been rising due to its unique optical and electronic properties with a tunable band gap (≈0.3-1.5 eV). While numerous research efforts have recently been devoted to nano- and optoelectronic applications of BP, no attention has been paid to promising medical applications. In this article, the preparation of BP-nanodots of a few nm to <20 nm with an average diameter of ≈10 nm and height of ≈8.7 nm is reported by a modified ultrasonication-assisted solution method. Stable formation of nontoxic phosphates and phosphonates from BP crystals with exposure in water or air is observed. As for the BP-nanodot crystals' stability (ionization and persistence of fluorescent intensity) in aqueous solution, after 10 d, ≈80% at 1.5 mg mL(-1) are degraded (i.e., ionized) in phosphate buffered saline. They showed no or little cytotoxic cell-viability effects in vitro involving blue- and green-fluorescence cell imaging. Thus, BP-nanodots can b...
Few-layer black phosphorus (BP) is the most promising material among the two-dimensional material... more Few-layer black phosphorus (BP) is the most promising material among the two-dimensional materials due to its layered structure and the excellent semiconductor properties. Currently, thin BP atomic layers are obtained mostly by mechanical exfoliation of bulk BP, which limits applications in thin-film based electronics due to a scaling process. Here we report highly crystalline few-layer black phosphorus thin films produced by liquid exfoliation. We demonstrate that the liquid-exfoliated BP forms a triangular crystalline structure on SiO 2 /Si (001) and amorphous carbon. The highly crystalline BP layers are faceted with a preferred orientation of the (010) plane on the sharp edge, which is an energetically most favorable facet according to the density functional theory calculations. Our results can be useful in understanding the triangular BP structure for large-area applications in electronic devices using twodimensional materials. The sensitivity and selectivity of liquid-exfoliated BP to gas vapor demonstrate great potential for practical applications as sensors.
We report a facile method for preparing hybrid nanostructured films composed of poly(3-hexlythiop... more We report a facile method for preparing hybrid nanostructured films composed of poly(3-hexlythiophene) (P3HT) and [6,6]-phenylC61-butyric acid methyl ester (PCBM) with silver (Ag) nanorods (AgNRs) array. The AgNRs were synthesized by an electrochemical deposition method using an anodic aluminum oxide template with 50-nm-pore-diameter and 10-mu m-thickness. The nanostructured P3HT/PCBM film was formed by the intercalation of AgNRs into the P3HT/PCBM film. The nanostructured P3HT/PCBM film with AgNRs showed enhanced optical absorption in the spectral range of 300-650 nm due to localized surface plasmon resonance and scattering effects around the AgNRs compared with spin-coated and nanopatterned P3HT/PCBM films without AgNRs.
The current-voltage characteristics and the carrier-transport mechanism of the Er-silicide (ErSi1... more The current-voltage characteristics and the carrier-transport mechanism of the Er-silicide (ErSi1.7) Schottky contacts to strained-silicon-on-insulator (sSOI) and silicon-on-insulator (SOI) were investigated. Barrier heights of 0.74 eV and 0.82 eV were obtained for the sSOI and SOI structures, respectively. The barrier height of the sSOI structure was observed to be lower than that of the SoI structure despite the formation of a Schottky contact using the same metal silicide. The sSOI structure exhibited better rectification and higher current level than the SOI structure, which could be associated with a reduction in the band gap of Si caused by strain. The generation-recombination mechanism was found to be dominant in the forward bias for both structures. Carrier generation along with the Poole-Frenkel mechanism dominated the reverse-biased current in the SOI structure. The saturation tendency of the reverse leakage current in the sSOI structure could be attributed to strain-induced defects at the interface in non-lattice-matched structures.
Owing to the possibilities of achieving high theoretical energy density and gravimetric capacity,... more Owing to the possibilities of achieving high theoretical energy density and gravimetric capacity, sulfur has been considered as a promising cathode material for rechargeable lithium batteries. However, sulfur shows rapid capacity fading due to the irreversible loss of soluble polysulfides and the decrease in active sites needed for conducting agents. Furthermore, the low electrical conductivity of sulfur hampers the full utilization of active materials. Here we report that graphene oxide coated sulfur composites (GO-S/CB) exhibit improved electrochemical stability as well as enhanced rate performance, evidenced by various electrochemical analyses. The cyclic voltammetry and the galvanostatic cycling analysis revealed that the GO plays key roles in homogenizing the nanocomposite structures of the electrodes, in improving the electrochemical contact, and in minimizing the loss of soluble polysulfide intermediates. An electrochemical impedance spectroscopy analysis also confirms the enhanced structural stability of the GO-S/CB composites after battery operation. As a result, the GO-S/CB exhibited excellent cycle stability and specific capacity as high as ∼723.7 mA h g(-1) even after 100 cycles at 0.5 C.
The design of DNA nanostructures is of fundamental importance, the intrinsic value of DNA as a bu... more The design of DNA nanostructures is of fundamental importance, the intrinsic value of DNA as a building-block material lies in its ability to organize other bio-molecules with nanometer-scale spacing. Here, we report the fabrication of DNA scaffolds with nano-pores (< 10 nm size) that formed easily without the use of additives (i.e., avidin, biotin, polyamine, or inorganic materials) into large scale DNA nanostructures by controlling buffer pH and reaction temperature. Large scale DNA scaffolds with porous structures are stable and uniform at slightly acidic buffer pH values (pH 5.5) and at approximately room temperature (∼ 30 C). The depth of the DNA scaffolds with randomly porous size (< 10 nm) was a maximum of approximately 8 nm. Protein immobilization results also confirmed that a fibronectin (FN) proteins/large scale DNA scaffolds/aminopropylytriethoxysilane (APS)/SiO 2 /Si substrate with high sensitivity formed in a well-defined manner. The DNA scaffolds can be applied for use with DNA based biochips, biophysics, and cell biology.
The interface formation between Ba0.6Sr0.4TiO3 and Al2O3 has been studied using photoelectron spe... more The interface formation between Ba0.6Sr0.4TiO3 and Al2O3 has been studied using photoelectron spectroscopy with in situ sample preparation. A negligible valence band discontinuity, corresponding to a ~5.6 eV barrier for electron transport at the BST/Al2O3 interface is determined. Current-voltage measurements show that the leakage current can be significantly reduced by inserting the Al2O3 barrier layer between barium strontium titanate (BST)
It is known that water purified by conventional TiO2 photocatalysts may not be safe enough for dr... more It is known that water purified by conventional TiO2 photocatalysts may not be safe enough for drinking, due to the toxicity by tiny existence of TiO2 nanoparticles after water treatment. We herein demonstrate a facile design of a three-dimensional (3D) TiO2 photocatalyst structure with which both the efficiency of purification and the safety level of the final purified water can be improved and ensured, respectively. The structure, consisting of 3D sulfur-doped TiO2 microtubes in nanotubes (eco-TiO2), is suitable for both environmental and bio-medical applications. Investigation of its formation mechanism reveals that anodic aluminum oxide (AAO), owing to a spatial constraint, causes a simple, nanoparticles-to-nanotubes structural rearrangement as a template for nanotube growth. It is found that eco-TiO2 can be activated under visible-light irradiation by non-metal (sulfur; S) doping, after which it shows visible-light photocatalytic activities over a range of solar energy. Importantly, an in vitro cytotoxicity test of well-purified water by eco-TiO2 confirms that eco-TiO2 satisfies the key human safety conditions.
Over the past few decades, two-dimensional (2D) and layered materials have emerged as new fields.... more Over the past few decades, two-dimensional (2D) and layered materials have emerged as new fields. Due to the zero-band-gap nature of graphene and the low photocatalytic performance of MoS2, more advanced semiconducting 2D materials have been prompted. As a result, semiconductor black phosphorus (BP) is a derived cutting-edge post-graphene contender for nanoelectrical application, because of its direct-band-gap nature. For the first time, we report on robust BP@TiO2 hybrid photocatalysts offering enhanced photocatalytic performance under light irradiation in environmental and biomedical fields, with negligible affected on temperature and pH conditions, as compared with MoS2@TiO2 prepared by the identical synthesis method. Remarkably, in contrast to pure few layered BP, which, due to its intrinsic sensitivity to oxygen and humidity was readily dissolved after just several uses, the BP@TiO2 hybrid photocatalysts showed a ~92% photocatalytic activity after 15 runs. Thus, metal-oxide-sta...
Using a simple method of mass production of green carbon nanotags (G-tags) from harmful cyanobact... more Using a simple method of mass production of green carbon nanotags (G-tags) from harmful cyanobacteria, we developed an advanced and efficient imaging platform for the purpose of anticancer therapy. Approximately 100 grams of G-tags per 100 kilograms of harmful cyanobacteria were prepared using our eco-friendly approach. The G-tags possess high solubility, excellent photostability, and low cytotoxicity (<1.5 mg/mL for 24 h). Moreover, doxorubicin-conjugated G-tags (T-tags; >0.1 mg/mL) induced death in cancer cells (HepG2 and MCF-7) in-vitro at a higher rate than that of only G-tags while in-vivo mice experiment showed enhanced anticancer efficacy by T-tags at 0.01 mg/mL, indicating that the loaded doxorubicin retains its pharmaceutical activity. The cancer cell uptake and intracellular location of the G- and T-tags were observed. The results indicate that these multifunctional T-tags can deliver doxorubicin to the targeted cancer cells and sense the delivery of doxorubicin by a...
Materials science & engineering. C, Materials for biological applications, 2014
This study evaluates the utility of an antibacterial microneedle composed of green tea (GT) extra... more This study evaluates the utility of an antibacterial microneedle composed of green tea (GT) extract and hyaluronic acid (HA), for the efficient delivery of GT. These microneedles have the potential to be a patient-friendly method for the conventional sustained release of drugs. In this study, a fabrication method using a mold-based technique to produce GT/HA microneedles with a maximum area of ~50mm(2) with antibacterial properties was used to manufacture transdermal drug delivery systems. Fourier transform infrared (FTIR) spectrometry was carried out to observe the potential modifications in the microneedles, when incorporated with GT. The degradation rate of GT in GT/HA microneedles was controlled simply by adjusting the HA composition. The effects of different ratios of GT in the HA microneedles were determined by measuring the release properties. In HA microneedles loaded with 70% GT (GT70), a continuous higher release rate was sustained for 72h. The in vitro cytotoxicity assays...
To obtain adsorbents with high capacities for removing heavy metals and organic pollutants capabl... more To obtain adsorbents with high capacities for removing heavy metals and organic pollutants capable of quick magnetic separation, we fabricated unique sea-urchin-like magnetic iron oxide (mixed γ-Fe2O3/Fe3O4 phase) nanostructures (called u-MFN) with large surface areas (94.1m(2) g(-1)) and strong magnetic properties (57.9 emu g(-1)) using a simple growth process and investigated their potential applications in water treatment. The u-MFN had excellent removal capabilities for the heavy metals As(V) (39.6 mg g(-1)) and Cr(VI) (35.0 mg g(-1)) and the organic pollutant Congo red (109.2 mg g(-1)). The u-MFN also displays excellent adsorption of Congo red after recycling. Because of its high adsorption capacity, fast adsorption rate, and quick magnetic separation from treated water, the u-MFN developed in the present study is expected to be an efficient magnetic adsorbent for heavy metals and organic pollutants in aqueous solutions.
Uploads
Papers by Jouhahn Lee