Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

TV reboot after a few seconds // WebOS 2.x not supported #60

Open
dimitrij2k opened this issue Apr 29, 2022 · 3 comments
Open

TV reboot after a few seconds // WebOS 2.x not supported #60

dimitrij2k opened this issue Apr 29, 2022 · 3 comments
Labels
dile_vt Issues related to webOS low-level capture backend

Comments

@dimitrij2k
Copy link

dimitrij2k commented Apr 29, 2022

I have a 2015 OLED (55EF9509) and after a Firmware Downgrade to Firmware 04.20.50 i was able to root the Tv manually. After i setup root/telnet and installed WebOSBrew ipk + elevate it, i installed PicCap on the TV. Unfortunately the UI was broken, so i create the config-file in terminal and start Hyperion-Webos in Terminal. But every time i start hyperion-webos, the TV start to transmit a signal over Flatbuffer to Hyper/ion/HDR and then the TV make a reboot (every Time). When i choose libcapture_vt (what the TV don't have), a Flatbuffer signal start (black frames) and is hyperion-webos is running without reboot.... when i choose the correct lib (dile_vt) then i get a reboot every time.

Problem (short): After 2-3 seconds of transmitting (unicapture) a Flatbuffer (libdile_vt) the TV reboot.

Hyperion-Webos tested: PicCap release + latest dev release + Unicapture branch (all have the same problem).

TV Info:

{
    "device_name": "lm14a",
    "hardware_id": "HE_DTV_W15A_AFADABAA",
    "hardware_revision": "DV_1ST",
    "keyboard_type": "virtual",
    "modem_present": "N",
    "nduid": "2e3720c54fd9fe1298b6eea0ff83************",
    "product_id": "55EF9509-ZA",
    "ram_size": "2 GB",
    "serial_number": "607W********",
    "storage_size": "4 GB",
    "wifi_addr": "30:a9:de:**:**:**"
}

Software Info:

{
    "core_os_kernel_version": "3.10.23-p.13.biscayne.lm14a.7",
    "core_os_name": "Rockhopper",
    "core_os_release": "2.2.3-1353",
    "core_os_release_codename": "beehive-biscayne",
    "encryption_key_type": "prodkey",
    "webos_api_version": "4.1.0",
    "webos_build_id": "1353",
    "webos_imagename": "starfish-dvb-secured",
    "webos_manufacturing_version": "04.26.10",     ===> Downgraded to 04.20.50
    "webos_name": "webOS TV",
    "webos_prerelease": "",
    "webos_release": "2.2.3",
    "webos_release_codename": "beehive-biscayne"
}

I upload two different Logs...

Hyperion-webos log (Log 1):

/media/developer $ ./hyperion_webos/hyperion-webos -v -b libdile_vt -f 24 -a 10.0.0.140 -x 180 -y 90 -S --verbose                                   
     0.001s [INFO main                ] Starting up...
     0.001s [INFO main                ] Running via CLI
     0.002s [INFO service_init        ] Autodetecting UI backend...
     0.087s [ DBG unicapture_init_backend] libgm_backend.so: loading...
     0.087s [ DBG unicapture_init_backend] libgm_backend.so: loaded, initializing...
[SYSTEM (user mode)][00411] 
=== Start to Init System... ===
[SYSTEM (user mode)][00412] MDrv_MMIO_Init
[SYSTEM (user mode)][00418] MsOS_Init
[MSOS_PRINT][003301]     ~!~mappd sharemem  @ 
[MSOS_PRINT][000669]     pthread_mutex_init
[MSOS_PRINT][000671]     CHIP_InitISR
[utopia info] utopia init
[utopia info] register module: MODULE_UTOPIA
[utopia info] register module: MODULE_BDMA
[utopia info] register module: MODULE_AESDMA
[utopia info] register module: MODULE_DSCMB
[utopia info] register module: MODULE_CI
[utopia info] register module: MODULE_GOP
[utopia info] register module: MODULE_GFX
[utopia info] register module: MODULE_TVENCODER
[utopia info] register module: MODULE_XC
[utopia info] register module: MODULE_MBX
[utopia info] register module: MODULE_DIP
[utopia info] register module: MODULE_PNL
[utopia info] register module: MODULE_VBI
[utopia info] register module: MODULE_ACE
[utopia info] register module: MODULE_DLC
[utopia info] register module: MODULE_IR
[utopia info] register module: MODULE_SAR
[utopia info] register module: MODULE_MIU
[utopia info] register module: MODULE_PWS
Function = PWSRegisterToUtopia, Line = 436, PWS Register finished
[utopia info] register module: MODULE_FLASH
[utopia info] register module: MODULE_SEM
Function = SEMRegisterToUtopia, Line = 385, SEM_Init is opened
[SEM USER DEBUG][000146]         _s32SEMMutex[0] = 1985216513
[SEM USER DEBUG][000146]         _s32SEMMutex[1] = 1985216514
[SEM USER DEBUG][000146]         _s32SEMMutex[2] = 1985216515
[SEM USER DEBUG][000146]         _s32SEMMutex[3] = 1985216516
[SEM USER DEBUG][000146]         _s32SEMMutex[4] = 1985216517
[SEM USER DEBUG][000146]         _s32SEMMutex[5] = 1985216518
[SEM USER DEBUG][000146]         _s32SEMMutex[6] = 1985216519
[SEM USER DEBUG][000146]         _s32SEMMutex[7] = 1985216520
[SEM USER DEBUG][000146]         _s32SEMMutex[8] = 1985216521
[SEM USER DEBUG][000146]         _s32SEMMutex[9] = 1985216522
[SEM USER DEBUG][000146]         _s32SEMMutex[10] = 1985216523
[SEM USER DEBUG][000146]         _s32SEMMutex[11] = 1985216524
[SEM USER DEBUG][000146]         _s32SEMMutex[12] = 1985216525
[SEM USER DEBUG][000146]         _s32SEMMutex[13] = 1985216526
[SEM USER DEBUG][000146]         _s32SEMMutex[14] = 1985216527
[SEM USER DEBUG][000146]         _s32SEMMutex[15] = 1985216528
Function = SEMRegisterToUtopia, Line = 387, SEM Register finished
[utopia info] register module: MODULE_SYS
[utopia info] register module: MODULE_VDEC_EX
[utopia info] register module: MODULE_MVOP
[utopia info] register module: MODULE_AVD
[utopia info] register module: MODULE_DMX
[utopia info] register module: MODULE_RTC
[utopia info] register module: MODULE_HWI2C
[utopia info] register module: MODULE_UART
[utopia info] register module: MODULE_PWM
[utopia info] register module: MODULE_NJPEG_EX
[utopia info] register module: MODULE_GPD
[utopia info] register module: MODULE_MFE
[utopia info] register module: MODULE_CPU
[utopia info] register module: MODULE_MSPI
[utopia info] register module: MODULE_GPIO
[utopia info] register module: MODULE_WDT
[utopia info] register module: MODULE_PM
[utopia info] register module: MODULE_AUDIO
[SYSTEM (user mode)][00421] MDrv_SYS_Init
[SYSTEM (user mode)][00424] MAdp_MPool_Init


_LX_MEM  = 0x20200000, 0x1F800000
_LX_MEM2 = 0xC0B00000, 0x1F500000

SysInfo.LX_MEM_ADDR  = 0x20200000, 0x1F800000
SysInfo.LX_MEM2_ADDR = 0xC0B00000, 0x1F500000

[MSOS_PRINT][000550]     [MsOS_Init] already inited!
[WARRING!] MAdp_SYS_GetMMAP(),324, type = 45, Size is 0
[WARRING!] MAdp_SYS_GetMMAP(),324, type = 50, Size is 0
[WARRING!] MAdp_SYS_GetMMAP(),324, type = 40, Size is 0
[WARRING!] MAdp_SYS_GetMMAP(),324, type = 41, Size is 0
[WARRING!] MAdp_SYS_GetMMAP(),324, type = 43, Size is 0
[WARRING!] MAdp_SYS_GetMMAP(),324, type = 83, Size is 0
[SYSTEM (user mode)][00427] MDrv_SEM_Init
[SEM USER DEBUG][000146]         _s32SEMMutex[0] = 1985216513
[SEM USER DEBUG][000146]         _s32SEMMutex[1] = 1985216514
[SEM USER DEBUG][000146]         _s32SEMMutex[2] = 1985216515
[SEM USER DEBUG][000146]         _s32SEMMutex[3] = 1985216516
[SEM USER DEBUG][000146]         _s32SEMMutex[4] = 1985216517
[SEM USER DEBUG][000146]         _s32SEMMutex[5] = 1985216518
[SEM USER DEBUG][000146]         _s32SEMMutex[6] = 1985216519
[SEM USER DEBUG][000146]         _s32SEMMutex[7] = 1985216520
[SEM USER DEBUG][000146]         _s32SEMMutex[8] = 1985216521
[SEM USER DEBUG][000146]         _s32SEMMutex[9] = 1985216522
[SEM USER DEBUG][000146]         _s32SEMMutex[10] = 1985216523
[SEM USER DEBUG][000146]         _s32SEMMutex[11] = 1985216524
[SEM USER DEBUG][000146]         _s32SEMMutex[12] = 1985216525
[SEM USER DEBUG][000146]         _s32SEMMutex[13] = 1985216526
[SEM USER DEBUG][000146]         _s32SEMMutex[14] = 1985216527
[SEM USER DEBUG][000146]         _s32SEMMutex[15] = 1985216528
[SYSTEM (user mode)][00430] MDrv_BDMA_Init
utopia.c : malloc ok,Module= MODULE_BDMA 
[SYSTEM (user mode)][00433] MDrv_MIU_Init
utopia.c : malloc ok,Module= MODULE_GPIO 
Module : MODULE_GPIO  Open /proc/utopia ok
_s32UtopiaFd : 15  
utopia.c : malloc ok,Module= MODULE_PNL 
utopia.c : malloc ok,Module= MODULE_PNL 
Module : MODULE_PNL  Open /proc/utopia ok
_s32UtopiaFd : 16  
MDrv_PNL_Init u32PnlRiuBaseAddr = 74dc1000
MDrv_PNL_Init u32PMRiuBaseAddr = 74ea1000
utopia.c : malloc ok,Module= MODULE_XC 
utopia.c : malloc ok,Module= MODULE_GFX 
Module : MODULE_GFX  Open /proc/utopia ok
_s32UtopiaFd : 17  
utopia.c : malloc ok,Module= MODULE_GOP 
Module : MODULE_GOP  Open /proc/utopia ok
_s32UtopiaFd : 18  
[000080.969316:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5e088
 
[000080.969342:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5e4b8
 
[000080.969355:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5b6a8
 
[000080.969367:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5bad8
 
[000080.969380:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5d828
 
[000080.969392:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5dc58
 
[000080.969413:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5f148
 
[000080.969426:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5f578
 
[000080.969439:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5f148
 
[000080.969457:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5f578
 
[000080.969470:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5e8e8
 
[000080.969482:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5ed18
 
[000080.969510:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5f9a8
 
[000080.969522:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5fdd8
 
[000080.969535:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5e088
 
[000080.969548:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5e4b8
 
[000080.969591:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5f9a8
 
[000080.969604:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5fdd8
 
[000080.969616:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5f9a8
 
[000080.969653:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : nod     0.286s [ DBG unicapture_init_backend] libgm_backend.so: success
     0.290s [ DBG unicapture_init_backend] libdile_vt_backend.so: loading...
     0.290s [ DBG unicapture_init_backend] libdile_vt_backend.so: loaded, initializing...
     0.291s [INFO capture_init        ] Capture start called.
     0.295s [ DBG capture_init        ] Got DILE_VT context!
     0.295s [ DBG capture_init        ] supportScaleUp: 0; (0x0)
     0.296s [ DBG capture_init        ] supportScaleDown: 1; (1x1)
     0.296s [ DBG capture_init        ] maxResolution: 1920x1080
     0.296s [ DBG capture_init        ] input deinterlace: 0; display deinterlace: 1
     0.334s [INFO capture_init        ] [DILE_VT] framerate divider: 2
     0.381s [INFO capture_init        ] [DILE_VT] frametime: 20455; estimated fps before divider: 48.88780
     0.422s [INFO capture_init        ] [DILE_VT] frametime: 20630; estimated fps after divider: 48.47310
     0.423s [INFO capture_init        ] [DILE_VT] vfbs: 1; planes: 2
     0.540s [ ERR service_register    ] Unable to register on Luna bus: Invalid permissions for org.webosbrew.piccap.service
     0.540s [WARN main                ] Service register failed: -1
     0.542s [ DBG main                ] Going into main loop..
     0.542s [ DBG connection_loop     ] Starting connection loop
     0.542s [INFO connection_loop     ] Connecting hyperion-client..
     0.543s [ DBG unicapture_run      ] Attempting UI capture init...
     0.543s [INFO unicapture_run      ] UI capture started
     0.543s [INFO unicapture_vsync_handler] vsync thread starting...
     0.577s [INFO connection_loop     ] hyperion-client connected!
     0.589s [INFO unicapture_run      ] Buffer dumped to: /tmp/hyperion-webos-dump.000.data
     1.842s [INFO unicapture_run      ] Buffer dumped to: /tmp/hyperion-webos-dump.001.data
     3.056s [INFO unicapture_run      ] Framerate: 23.854118 FPS; timings - wait: 35084us, acquire: 1561us, convert: 1733us, process; 29us, send: 3832us, release: 1us
     3.057s [INFO unicapture_run      ]         UI: pixfmt: 11; 180x90
     3.057s [INFO unicapture_run      ]      VIDEO: pixfmt: 0; 0x0
     3.057s [INFO unicapture_run      ] CONV    UI: pixfmt: 12; 180x90
     3.057s [INFO unicapture_run      ] CONV VIDEO: pixfmt: 0; 0x0
     3.094s [INFO unicapture_run      ] Buffer dumped to: /tmp/hyperion-webos-dump.002.data
     4.347s [INFO unicapture_run      ] Buffer dumped to: /tmp/hyperion-webos-dump.003.data
     5.563s [INFO unicapture_run      ] Framerate: 23.945739 FPS; timings - wait: 33753us, acquire: 1017us, convert: 3154us, process; 41us, send: 3829us, release: 2us
     5.564s [INFO unicapture_run      ]         UI: pixfmt: 11; 180x90
     5.564s [INFO unicapture_run      ]      VIDEO: pixfmt: 0; 0x0
     5.564s [INFO unicapture_run      ] CONV    UI: pixfmt: 12; 180x90
     5.564s [INFO unicapture_run      ] CONV VIDEO: pixfmt: 0; 0x0
     5.601s [INFO unicapture_run      ] Buffer dumped to: /tmp/hyperion-webos-dump.004.data
     6.852s [INFO unicapture_run      ] Buffer dumped to: /tmp/hyperion-webos-dump.005.data
     8.067s [INFO unicapture_run      ] Framerate: 23.980470 FPS; timings - wait: 35051us, acquire: 1037us, convert: 1718us, process; 49us, send: 3860us, release: 2us
     8.067s [INFO unicapture_run      ]         UI: pixfmt: 11; 180x90
     8.068s [INFO unicapture_run      ]      VIDEO: pixfmt: 0; 0x0
     8.068s [INFO unicapture_run      ] CONV    UI: pixfmt: 12; 180x90
     8.068s [INFO unicapture_run      ] CONV VIDEO: pixfmt: 0; 0x0
     8.105s [INFO unicapture_run      ] Buffer dumped to: /tmp/hyperion-webos-dump.006.data

Hyperion-webos log (Log 2):

root@LGwebOSTV:/media/developer/hyperion_webos# ./hyperion-webos -v -b libdile_vt -f 24 -a 10.0.0.140 -x 180 -y 90 -S --verbose
     0.001s [INFO main                ] Starting up...
     0.001s [INFO main                ] Running via CLI
     0.002s [INFO service_init        ] Autodetecting UI backend...
     0.047s [ DBG unicapture_init_backend] libgm_backend.so: loading...
     0.047s [ DBG unicapture_init_backend] libgm_backend.so: loaded, initializing...
[SYSTEM (user mode)][00411] 
=== Start to Init System... ===
[SYSTEM (user mode)][00412] MDrv_MMIO_Init
[SYSTEM (user mode)][00418] MsOS_Init
[MSOS_PRINT][003301]     ~!~mappd sharemem  @ 
[MSOS_PRINT][000669]     pthread_mutex_init
[MSOS_PRINT][000671]     CHIP_InitISR
[utopia info] utopia init
[utopia info] register module: MODULE_UTOPIA
[utopia info] register module: MODULE_BDMA
[utopia info] register module: MODULE_AESDMA
[utopia info] register module: MODULE_DSCMB
[utopia info] register module: MODULE_CI
[utopia info] register module: MODULE_GOP
[utopia info] register module: MODULE_GFX
[utopia info] register module: MODULE_TVENCODER
[utopia info] register module: MODULE_XC
[utopia info] register module: MODULE_MBX
[utopia info] register module: MODULE_DIP
[utopia info] register module: MODULE_PNL
[utopia info] register module: MODULE_VBI
[utopia info] register module: MODULE_ACE
[utopia info] register module: MODULE_DLC
[utopia info] register module: MODULE_IR
[utopia info] register module: MODULE_SAR
[utopia info] register module: MODULE_MIU
[utopia info] register module: MODULE_PWS
Function = PWSRegisterToUtopia, Line = 436, PWS Register finished
[utopia info] register module: MODULE_FLASH
[utopia info] register module: MODULE_SEM
Function = SEMRegisterToUtopia, Line = 385, SEM_Init is opened
[SEM USER DEBUG][000146]         _s32SEMMutex[0] = 1985216513
[SEM USER DEBUG][000146]         _s32SEMMutex[1] = 1985216514
[SEM USER DEBUG][000146]         _s32SEMMutex[2] = 1985216515
[SEM USER DEBUG][000146]         _s32SEMMutex[3] = 1985216516
[SEM USER DEBUG][000146]         _s32SEMMutex[4] = 1985216517
[SEM USER DEBUG][000146]         _s32SEMMutex[5] = 1985216518
[SEM USER DEBUG][000146]         _s32SEMMutex[6] = 1985216519
[SEM USER DEBUG][000146]         _s32SEMMutex[7] = 1985216520
[SEM USER DEBUG][000146]         _s32SEMMutex[8] = 1985216521
[SEM USER DEBUG][000146]         _s32SEMMutex[9] = 1985216522
[SEM USER DEBUG][000146]         _s32SEMMutex[10] = 1985216523
[SEM USER DEBUG][000146]         _s32SEMMutex[11] = 1985216524
[SEM USER DEBUG][000146]         _s32SEMMutex[12] = 1985216525
[SEM USER DEBUG][000146]         _s32SEMMutex[13] = 1985216526
[SEM USER DEBUG][000146]         _s32SEMMutex[14] = 1985216527
[SEM USER DEBUG][000146]         _s32SEMMutex[15] = 1985216528
Function = SEMRegisterToUtopia, Line = 387, SEM Register finished
[utopia info] register module: MODULE_SYS
[utopia info] register module: MODULE_VDEC_EX
[utopia info] register module: MODULE_MVOP
[utopia info] register module: MODULE_AVD
[utopia info] register module: MODULE_DMX
[utopia info] register module: MODULE_RTC
[utopia info] register module: MODULE_HWI2C
[utopia info] register module: MODULE_UART
[utopia info] register module: MODULE_PWM
[utopia info] register module: MODULE_NJPEG_EX
[utopia info] register module: MODULE_GPD
[utopia info] register module: MODULE_MFE
[utopia info] register module: MODULE_CPU
[utopia info] register module: MODULE_MSPI
[utopia info] register module: MODULE_GPIO
[utopia info] register module: MODULE_WDT
[utopia info] register module: MODULE_PM
[utopia info] register module: MODULE_AUDIO
[SYSTEM (user mode)][00421] MDrv_SYS_Init
[SYSTEM (user mode)][00424] MAdp_MPool_Init


_LX_MEM  = 0x20200000, 0x1F800000
_LX_MEM2 = 0xC0B00000, 0x1F500000

SysInfo.LX_MEM_ADDR  = 0x20200000, 0x1F800000
SysInfo.LX_MEM2_ADDR = 0xC0B00000, 0x1F500000

[MSOS_PRINT][000550]     [MsOS_Init] already inited!
[WARRING!] MAdp_SYS_GetMMAP(),324, type = 45, Size is 0
[WARRING!] MAdp_SYS_GetMMAP(),324, type = 50, Size is 0
[WARRING!] MAdp_SYS_GetMMAP(),324, type = 40, Size is 0
[WARRING!] MAdp_SYS_GetMMAP(),324, type = 41, Size is 0
[WARRING!] MAdp_SYS_GetMMAP(),324, type = 43, Size is 0
[WARRING!] MAdp_SYS_GetMMAP(),324, type = 83, Size is 0
[SYSTEM (user mode)][00427] MDrv_SEM_Init
[SEM USER DEBUG][000146]         _s32SEMMutex[0] = 1985216513
[SEM USER DEBUG][000146]         _s32SEMMutex[1] = 1985216514
[SEM USER DEBUG][000146]         _s32SEMMutex[2] = 1985216515
[SEM USER DEBUG][000146]         _s32SEMMutex[3] = 1985216516
[SEM USER DEBUG][000146]         _s32SEMMutex[4] = 1985216517
[SEM USER DEBUG][000146]         _s32SEMMutex[5] = 1985216518
[SEM USER DEBUG][000146]         _s32SEMMutex[6] = 1985216519
[SEM USER DEBUG][000146]         _s32SEMMutex[7] = 1985216520
[SEM USER DEBUG][000146]         _s32SEMMutex[8] = 1985216521
[SEM USER DEBUG][000146]         _s32SEMMutex[9] = 1985216522
[SEM USER DEBUG][000146]         _s32SEMMutex[10] = 1985216523
[SEM USER DEBUG][000146]         _s32SEMMutex[11] = 1985216524
[SEM USER DEBUG][000146]         _s32SEMMutex[12] = 1985216525
[SEM USER DEBUG][000146]         _s32SEMMutex[13] = 1985216526
[SEM USER DEBUG][000146]         _s32SEMMutex[14] = 1985216527
[SEM USER DEBUG][000146]         _s32SEMMutex[15] = 1985216528
[SYSTEM (user mode)][00430] MDrv_BDMA_Init
utopia.c : malloc ok,Module= MODULE_BDMA 
[SYSTEM (user mode)][00433] MDrv_MIU_Init
utopia.c : malloc ok,Module= MODULE_GPIO 
Module : MODULE_GPIO  Open /proc/utopia ok
_s32UtopiaFd : 15  
utopia.c : malloc ok,Module= MODULE_PNL 
utopia.c : malloc ok,Module= MODULE_PNL 
Module : MODULE_PNL  Open /proc/utopia ok
_s32UtopiaFd : 16  
MDrv_PNL_Init u32PnlRiuBaseAddr = 74df1000
MDrv_PNL_Init u32PMRiuBaseAddr = 74ed1000
utopia.c : malloc ok,Module= MODULE_XC 
utopia.c : malloc ok,Module= MODULE_GFX 
Module : MODULE_GFX  Open /proc/utopia ok
_s32UtopiaFd : 17  
utopia.c : malloc ok,Module= MODULE_GOP 
Module : MODULE_GOP  Open /proc/utopia ok
_s32UtopiaFd : 18  
[000122.618934:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5e168
 
[000122.619093:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5e598
 
[000122.619174:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5b788
 
[000122.619280:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5bbb8
 
[000122.619358:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5d908
 
[000122.619457:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5dd38
 
[000122.619560:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5f228
 
[000122.619653:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5f658
 
[000122.619744:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5f228
 
[000122.619835:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5f658
 
[000122.619926:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5e9c8
 
[000122.620055:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5edf8
 
[000122.620171:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5fa88
 
[000122.620261:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5feb8
 
[000122.620369:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5e168
 
[000122.620459:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5e598
 
[000122.620548:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5fa88
 
[000122.620638:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5feb8
 
[000122.620727:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5fa88
 
[000122.620818:hyperion-webos->hyperion-webos] <warning> GM_TEMPLATE_HASH_Insert : node already found..ptr = 0x5feb8
 
[000122.620906:hyperion-webos->hyperion-webos] [_GM_UseGFXHWDirectly][905] _GM_UseGFXHWDirectly OK 
 
     0.263s [ DBG unicapture_init_backend] libgm_backend.so: success
     0.266s [ DBG unicapture_init_backend] libdile_vt_backend.so: loading...
     0.266s [ DBG unicapture_init_backend] libdile_vt_backend.so: loaded, initializing...
     0.267s [INFO capture_init        ] Capture start called.
utopia.c : malloc ok,Module= MODULE_XC 
  sc main addr: 0x31000000, size: 0x3000000
  sc sub  addr: 0x3bf00000, size: 0x3000000
  menuload addr: 0x3f200000, size: 0x100000
  sc main frcm addr: 0x34100000, size: 0x6600000
main addr: 31000000, main size: 3000000
sub addr: 3bf00000, sub size: 3000000
main frc addr: 34100000, main size: 6600000
main frc addr: 3a700000, main size: 1800000
_MApi_VT_Sys_Init_XC 3896 ~~~~
MApi_XC_Init Success!!!!!!
utopia.c : malloc ok,Module= MODULE_DIP 
Module : MODULE_DIP  Open /proc/utopia ok
_s32UtopiaFd : 21  
[Fail][MDrv_MVOP_GetOutputTiming,3583]
[Fail][MDrv_MVOP_GetHStart,2551]
[Fail][MDrv_MVOP_GetVStart,2618]
utopia.c : malloc ok,Module= MODULE_VDEC_EX 
Module : MODULE_VDEC_EX  Open /proc/utopia ok
_s32UtopiaFd : 22  
     0.278s [ DBG capture_init        ] Got DILE_VT context!
     0.278s [ DBG capture_init        ] supportScaleUp: 0; (0x0)
     0.278s [ DBG capture_init        ] supportScaleDown: 1; (1x1)
     0.278s [ DBG capture_init        ] maxResolution: 1920x1080
     0.278s [ DBG capture_init        ] input deinterlace: 0; display deinterlace: 1
     0.310s [INFO capture_init        ] [DILE_VT] framerate divider: 2
     0.356s [INFO capture_init        ] [DILE_VT] frametime: 20444; estimated fps before divider: 48.91411
     0.397s [INFO capture_init        ] [DILE_VT] frametime: 20371; estimated fps after divider: 49.08939
     0.398s [INFO capture_init        ] [DILE_VT] vfbs: 1; planes: 2
     0.399s [INFO capture_init        ] [DILE_VT] pixelFormat: 4; width: 176; height: 90; stride: 176...
     0.399s [ DBG capture_init        ] [DILE_VT] vfb[0][0] = 0xb4d00000
     0.399s [ DBG capture_init        ] [DILE_VT] vfb[0][1] = 0xb4d03de0
     7.203s [ ERR service_register    ] Unable to register on Luna bus: Invalid permissions for org.webosbrew.piccap.service
     7.203s [WARN main                ] Service register failed: -1
     7.203s [ DBG main                ] Going into main loop..
     7.204s [ DBG connection_loop     ] Starting connection loop
     7.205s [INFO connection_loop     ] Connecting hyperion-client..
     7.205s [ DBG unicapture_run      ] Attempting UI capture init...
     7.206s [INFO unicapture_run      ] UI capture started
     7.208s [INFO unicapture_vsync_handler] vsync thread starting...
     7.255s [INFO unicapture_run      ] Buffer dumped to: /tmp/hyperion-webos-dump.000.data
     7.320s [INFO connection_loop     ] hyperion-client connected!
@dimitrij2k dimitrij2k changed the title TV reboot after a few seconds (WebOS 2.x) :dile_vt: TV reboot after a few seconds (WebOS 2.x) :dile_vt Apr 29, 2022
@dimitrij2k dimitrij2k changed the title TV reboot after a few seconds (WebOS 2.x) :dile_vt TV reboot after a few seconds (WebOS 2.x) (dile_vt) Apr 29, 2022
@DavidBuchanan314
Copy link
Member

I suspect the reboot is caused by some important system service crashing, or similar. Are there any interesting logs in dmesg?

@dimitrij2k
Copy link
Author

Here a small proof that hyperion-webos is running as "root". But the first seconds of transfer prove it already...

PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND                                                                                                       
  731 root      20   0 1555m  69m  35m S  122  7.1   0:54.25 tvservice                                                                                                      
 2552 root      20   0  453m  14m  13m S    5  1.5   0:00.63 hyperion-webos                                                                                                 
 1504 root      20   0 66864  10m 3120 S    4  1.1   0:02.96 mojodb-luna                                                                                                    
  838 webappma  20   0  345m  74m  39m S    3  7.6   0:08.28 QtWebProcess                                                                                                   
  708 root      20   0  280m  14m  13m S    2  1.4   0:01.75 gm                                                                                                             
 1958 root      20   0 40252  13m 6628 S    1  1.4   0:01.24 com.webos.servi                                                                                                
 2506 root      20   0  4048 1200  900 R    1  0.1   0:00.42 top                                                                                                            
    8 root      20   0     0    0    0 S    0  0.0   0:00.16 rcu_preempt                                                                                                    
  687 root      20   0 15080 1616 1380 S    0  0.2   0:00.40 PmLogDaemon  

and here is the dmesg after reboot:

root@LGwebOSTV:/# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.23-p.13.biscayne.lm14a.4 (gatekeeper.tvsw@swfarm-oebuild3) (gcc version 4.8.3 20140401 (prerelease) (crosstool-NG 1.20.0 - 4.8-2014.11-x86_64) ) #1 SMP PREEMPT Tue Nov 10 12:04:25 KST 2015
[    0.000000] CPU: ARMv7 Processor [410fd033] revision 3 (ARMv7), cr=10c03c7d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: muji
[    0.000000] uPanelType_Innolux = 0

[    0.000000] LX_MEM  = 0x20200000, 0x1f800000
[    0.000000] LX_MEM2 = 0xc0b00000, 0x1f500000
[    0.000000] LX_MEM3 = 0x0, 0x0
[    0.000000] EMAC_LEN= 0x100000
[    0.000000] DRAM_LEN= 0x80000000
[    0.000000] fix lowmem size as miu0 size, vmalloc_min = 0x9f800000
[    0.000000] Function = arm_memblock_init, Line = 430, find cma_default buffer at whole lowmem
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] BUG: mapping for 0x1f000000 at 0xfd000000 out of vmalloc space
[    0.000000] BUG: mapping for 0x16000000 at 0xfd400000 out of vmalloc space
[    0.000000] BUG: mapping for 0x15000000 at 0xfd408000 out of vmalloc space
[    0.000000] On node 0 totalpages: 257280
[    0.000000]   Normal zone: 1008 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 129024 pages, LIFO batch:31
[    0.000000]   HighMem zone: 1002 pages used for memmap
[    0.000000]   HighMem zone: 128256 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 9 pages/cpu @8191f000 s12608 r8192 d16064 u36864
[    0.000000] pcpu-alloc: s12608 r8192 d16064 u36864 alloc=9*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256272
[    0.000000] Kernel command line: root=/dev/mmcblk0p26  ro  rootfstype=squashfs ethaddr=14:C9:13:0F:5B:8B quiet loglevel=0 console=ttyS0,115200 rootwait modelopt=000111111011 hwopt=2022040010031120041 ToolOpt=34790:21524:697:64601:18598:2474:44687 countryGrp=4 debugMode=5 modelName=55EF9509-ZA serialNum=607WRSVKV078 devtmpfs.mount=1 chip=LM14AB0 NR_BANK=0x0 vmalloc=350M LX_MEM=0x1f800000 EMAC_MEM=0x100000 DRAM_LEN=0x80000000 LX_MEM2=0xc0b00000,0x1f500000 LX_MEM3=0xe0000000,0x0 DRAM_SIZE1=0x40000000 DRAM_SIZE2=0x40000000 KERNEL_PROTECT snapshot resume=/dev/mmcblk0p43 emmc_size=0x0ebfff000 BOOTLOGO_IN_MBOOT ENV_VAR_OFFSET=0x0 ENV_VAR_SIZE=0x10000 ENV=EMMC SECURITY=ON sver=58 bver=3.00.58-58 innolux=0 cmdEnd
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 504MB 501MB = 1005MB total
[    0.000000] Memory: 1010884k/1010884k available, 18236k reserved, 513024K highmem
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xa0000000 - 0xdd000000   ( 976 MB)
    lowmem  : 0x80000000 - 0x9f800000   ( 504 MB)
    pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
    modules : 0x7ee00000 - 0x7fe00000   (  16 MB)
      .text : 0x80008000 - 0x80763e84   (7536 kB)
      .init : 0x80764000 - 0x807c4140   ( 385 kB)
      .data : 0x807c6000 - 0x80854328   ( 569 kB)
       .bss : 0x80854328 - 0x80926088   ( 840 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:384
[    0.000000] Global Timer Frequency = 12 MHz
[    0.000000] CPU Clock Frequency = 1008 MHz
[    0.000000] fre = 12000000, mult= -1498764629, shift= 25
[    0.000000] sched_clock: 32 bits at 12MHz, resolution 83ns, wraps every 357913ms
[    0.000000] [AT][KR][reset timer][1633]
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [ttyS0] enabled
[    0.000000] allocated 2097152 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.051496] Calibrating delay loop... 2002.94 BogoMIPS (lpj=4005888)
[    0.064148] pid_max: default: 32768 minimum: 301
[    0.064304] Security Framework initialized
[    0.064364] Mount-cache hash table entries: 512
[    0.065186] Initializing cgroup subsys debug
[    0.065197] Initializing cgroup subsys memory
[    0.065229] Initializing cgroup subsys devices
[    0.065238] Initializing cgroup subsys freezer
[    0.065246] Initializing cgroup subsys blkio
[    0.065254] Initializing cgroup subsys perf_event
[    0.065331] CPU: Testing write buffer coherency: ok
[    0.065365] ftrace: allocating 20376 entries in 60 pages
[    0.096834] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.097395] Setting up static identity map for 0x8058f968 - 0x8058f9c0
[    0.129147] CPU1: Booted secondary processor
[    0.165009] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.173180] CPU2: Booted secondary processor
[    0.209064] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.217241] CPU3: Booted secondary processor
[    0.253122] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.129128] pen_release = 0x00000001, addr= 0x80851c0c, pen_release ptr = 0x00000001
 pen_release = 0x00000002, addr= 0x80851c0c, pen_release ptr = 0x00000002
 pen_release = 0x00000003, addr= 0x80851c0c, pen_release ptr = 0x00000003
 
[    0.253203] Brought up 4 CPUs
[    0.253214] SMP: Total of 4 processors activated (8054.78 BogoMIPS).
[    0.253945] devtmpfs: initialized
[    0.267910] NET: Registered protocol family 16
[    0.269166] DMA: preallocated 1280 KiB pool for atomic coherent allocations
[    0.286082] bio: create slab <bio-0> at 0
[    0.287048] SCSI subsystem initialized
[    0.287535] usbcore: registered new interface driver usbfs
[    0.287641] usbcore: registered new interface driver hub
[    0.287776] usbcore: registered new device driver usb
[    0.287972] Linux video capture interface: v2.00
[    0.288471] eMMC: no SD 1006
[    0.320703] Advanced Linux Sound Architecture Driver Initialized.
[    0.324867] cfg80211: Calling CRDA to update world regulatory domain
[    0.325477] Switching to clocksource timer1
[    0.351460] mmc0: BKOPS_EN bit is not set
[    0.352920] 
eMMC: HS400 200MHz 
[    0.353208] mmc0: new HS400 MMC card at address 0001
[    0.355267] NET: Registered protocol family 2
[    0.355678] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.355760] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
[    0.355865] TCP: Hash tables configured (established 4096 bind 4096)
[    0.355923] TCP: reno registered
[    0.355935] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.355961] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.356193] NET: Registered protocol family 1
[    0.356441] RPC: Registered named UNIX socket transport module.
[    0.356448] RPC: Registered udp transport module.
[    0.356454] RPC: Registered tcp transport module.
[    0.356460] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.357149] CPU PMU: probing PMU on CPU 0
[    0.357156] CPU PMU: failed to probe PMU!
[    0.357162] CPU PMU: failed to register PMU devices!
[    0.359128] bounce pool size: 64 pages
[    0.368297] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.369935] NFS: Registering the id_resolver key type
[    0.369975] Key type id_resolver registered
[    0.369982] Key type id_legacy registered
[    0.369998] Installing knfsd (copyright (C) 1996 [email protected]).
[    0.370661] NTFS driver 2.1.30 [Flags: R/O].
[    0.370995] fuse init (API version 7.22)
[    0.371717] msgmni has been set to 972
[    0.372578] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.372588] io scheduler noop registered (default)
[    0.372766] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[    0.372911] serial8250: ttyS0 at I/O 0xfd201300 (irq = 192) is a 16550
[    0.373151] serial8250: ttyS1 at I/O 0xfd220c00 (irq = 231) is a 16550
[    0.373364] serial8250: ttyS2 at I/O 0xfd220d00 (irq = 242) is a 16550
[    0.378554] loop: module loaded
[    0.379466] mtdoops: mtd device (mtddev=name/number) must be supplied
[    0.379593] PPP generic driver version 2.4.2
[    0.379840] PPP BSD Compression module registered
[    0.379848] PPP Deflate Compression module registered
[    0.379983] usbcore: registered new interface driver cdc_acm
[    0.379990] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    0.380223] usbcore: registered new interface driver usbserial
[    0.380325] usbcore: registered new interface driver usbserial_generic
[    0.380428] usbserial: USB Serial support registered for generic
[    0.380528] usbcore: registered new interface driver ipw
[    0.380627] usbserial: USB Serial support registered for IPWireless converter
[    0.380731] usbcore: registered new interface driver option
[    0.380831] usbserial: USB Serial support registered for GSM modem (1-port)
[    0.380935] usbcore: registered new interface driver pl2303
[    0.381050] usbserial: USB Serial support registered for pl2303
[    0.381388] mousedev: PS/2 mouse device common for all mice
[    0.381868] usbcore: registered new interface driver xpad
[    0.382138] usbcore: registered new interface driver uvcvideo
[    0.382144] USB Video Class driver (1.1.1)
[    0.382331] mmcblk0: mmc0:0001 004GE0 3.68 GiB 
[    0.382472] mmcblk0boot0: mmc0:0001 004GE0 partition 1 2.00 MiB
[    0.382611] mmcblk0boot1: mmc0:0001 004GE0 partition 2 2.00 MiB
[    0.382743] mmcblk0rpmb: mmc0:0001 004GE0 partition 3 512 KiB
[    0.383671] LG EMMC PARTITION MAP!
[    0.383867]  p1 0x000000000000-0x000000200000 : "secureboot"
[    0.383876]  p2 0x000000580000-0x000000880000 : "boot"
[    0.383884]  p3 0x000000500000-0x000000540000 : "partinfo"
[    0.383892]  p4 0x000000540000-0x000000580000 : "mapbak"
[    0.383899]  p5 0x000000200000-0x000000500000 : "boot"
[    0.383907]  p6 0x000000880000-0x000001c80000 : "swue"
[    0.383914]  p7 0x000001c80000-0x000003080000 : "swue"
[    0.383922]  p8 0x000003080000-0x0000030c0000 : "emergency"
[    0.383930]  p9 0x0000030c0000-0x000003100000 : "crc32info"
[    0.383938]  p10 0x000003100000-0x000003140000 : "macadr"
[    0.383946]  p11 0x000003140000-0x000003180000 : "env_nvm"
[    0.383953]  p12 0x000003180000-0x000003200000 : "widevine"
[    0.383961]  p13 0x000003200000-0x000003280000 : "idfile"
[    0.383969]  p14 0x000003280000-0x000003300000 : "cert"
[    0.383977]  p15 0x000003300000-0x000003900000 : "authcxt"
[    0.383984]  p16 0x000003900000-0x000004100000 : "nvram"
[    0.383992]  p17 0x000004100000-0x000004140000 : "marlin"
[    0.384000]  p18 0x000004140000-0x000004540000 : "xcas"
[    0.384008]  p19 0x000004540000-0x0000045c0000 : "sestore"
[    0.384016]  p20 0x0000045c0000-0x000004640000 : "sedata"
[    0.384023]  p21 0x000005800000-0x000006700000 : "kernel"
[    0.384031]  p22 0x000004800000-0x000005700000 : "kernel"
[    0.384039]  p23 0x000006700000-0x000006780000 : "logo"
[    0.384047]  p24 0x000006780000-0x000006980000 : "hwsetting"
[    0.384055]  p25 0x000006980000-0x000006a80000 : "pmsfw"
[    0.384063]  p26 0x000041d00000-0x00006ad80000 : "rootfs"
[    0.384070]  p27 0x00006ad80000-0x00006e180000 : "tvservice"
[    0.384078]  p28 0x00006e180000-0x000076cc0000 : "otncabi"
[    0.384086]  p29 0x000076cc0000-0x000076dc0000 : "otycabi"
[    0.384094]  p30 0x000076dc0000-0x00007b0c0000 : "fonts"
[    0.384102]  p31 0x00007b0c0000-0x00007c580000 : "smartkey"
[    0.384110]  p32 0x00007c580000-0x00007cc80000 : "tzfw"
[    0.384118]  p33 0x000041a00000-0x000041c00000 : "hwsetting"
[    0.384126]  p34 0x000041c00000-0x000041d00000 : "pmsfw"
[    0.384134]  p35 0x000006a80000-0x00002fb00000 : "rootfs"
[    0.384142]  p36 0x00002fb00000-0x000032f00000 : "tvservice"
[    0.384150]  p37 0x000032f00000-0x00003ba40000 : "otncabi"
[    0.384158]  p38 0x00003ba40000-0x00003bb40000 : "otycabi"
[    0.384166]  p39 0x00003bb40000-0x00003fe40000 : "fonts"
[    0.384174]  p40 0x00003fe40000-0x000041300000 : "smartkey"
[    0.384182]  p41 0x000041300000-0x000041a00000 : "tzfw"
[    0.384190]  p42 0x00007cc80000-0x00007cd00000 : "profdata"
[    0.384198]  p43 0x00007cd00000-0x000089500000 : "hib"
[    0.384206]  p44 0x000089500000-0x000089580000 : "hist"
[    0.384214]  p45 0x000089580000-0x000090580000 : "db8"
[    0.384222]  p46 0x000090580000-0x0000b0580000 : "data"
[    0.384230]  p47 0x0000b0580000-0x0000e4800000 : "apps"
[    0.384258]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47
[    0.396735]  mmcblk0boot1: unable to read partition table
[    0.396761] mmcblk0boot1: partition table beyond EOD, truncated
[    0.397899]  mmcblk0boot0: unable to read partition table
[    0.397914] mmcblk0boot0: partition table beyond EOD, truncated
[    0.398409] hidraw: raw HID events driver (C) Jiri Kosina
[    0.399176] usbcore: registered new interface driver usbhid
[    0.399182] usbhid: USB HID core driver
[    0.399740] zram: Created 1 device(s) ...
[    0.400326] Mstar_emac: [ PHY Addr ] ==> :0
[    0.400358] Mstar_emac: alloRAM_VA_BASE = 0xa0200000 alloRAM_PA_BASE= 0x3fa00000  alloRAM_SIZE= 0x100000
[    0.401363] RBQP_BASE = 3fa04000
[    0.402132] mmapger: one mmap for all, quick and clean. ~oger&ennon : succeed.
[    0.403883] [DVFS] OSC = 249, SIDD = 180
[    0.403889] [DVFS] This is Not FastIC 
[    0.403987] [DEMOD_DRV][00371]init 255
[    0.404226] film driver good
[    0.404673] oprofile: no performance counters
[    0.404885] oprofile: using timer interrupt.
[    0.404926] Netfilter messages via NETLINK v0.30.
[    0.404972] nf_conntrack version 0.5.0 (15795 buckets, 63180 max)
[    0.405723] ip_tables: (C) 2000-2006 Netfilter Core Team
[    0.405812] TCP: cubic registered
[    0.405825] NET: Registered protocol family 17
[    0.405925] Key type dns_resolver registered
[    0.406422] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 3
[    0.407004] registered taskstats version 1
[    0.407462] ALSA device list:
[    0.407469]   No soundcards found.
[    0.410239] VFS: Mounted root (squashfs filesystem) readonly on device 179:26.
[    0.411605] devtmpfs: mounted
[    0.411636] [AT][KR][start init][2045]
[    0.411642] [AutoTest][Kernel][start Initprocess][2045]
[    1.290299] utpa2k: module license 'MSTAR' taints kernel.
[    1.290316] Disabling lock debugging due to kernel taint
[    1.351605] UTPA2K VA Start:0xdd000000, end:0xfd000000
[    1.351618] UTPA2K VA Size:0x20000000
[    1.351659] CHIP_InitISR
[    1.351676] [utopia info] utopia init
[    1.351702] [utopia info] register module: MODULE_BDMA
[    1.351730] [utopia info] register module: MODULE_AESDMA
[    1.351781] [utopia info] register module: MODULE_DSCMB
[    1.351831] [utopia info] register module: MODULE_GOP
[    1.351875] [utopia info] register module: MODULE_GFX
[    1.351915] [utopia info] register module: MODULE_TVENCODER
[    1.351954] [utopia info] register module: MODULE_XC
[    1.352588] [utopia info] register module: MODULE_DIP
[    1.352694] [utopia info] register module: MODULE_PNL
[    1.352764] [utopia info] register module: MODULE_VBI
[    1.352836] [utopia info] register module: MODULE_ACE
[    1.352887] [utopia info] register module: MODULE_SAR
[    1.352941] [utopia info] register module: MODULE_MIU
[    1.352995] [utopia info] register module: MODULE_SYS
[    1.353051] [utopia info] register module: MODULE_VDEC_EX
[    1.353108] [utopia info] register module: MODULE_MVOP
[    1.353169] [utopia info] register module: MODULE_AVD
[    1.353229] [utopia info] register module: MODULE_DMX
[    1.353302] [utopia info] register module: MODULE_RTC
[    1.353369] [utopia info] register module: MODULE_HWI2C
[    1.353662] [utopia info] register module: MODULE_PWM
[    1.353736] [utopia info] register module: MODULE_NJPEG_EX
[    1.353811] [utopia info] register module: MODULE_GPD
[    1.353893] [utopia info] register module: MODULE_MFE
[    1.353981] [utopia info] register module: MODULE_CPU
[    1.354066] [utopia info] register module: MODULE_GPIO
[    1.354173] [utopia info] register module: MODULE_WDT
[    1.354260] [utopia info] register module: MODULE_PM
[    1.354348] [utopia info] register module: MODULE_AUDIO
[    1.354401] Open MIU fail
[    1.417676] [4294892648][MAD_ALSA][001726]     6Linux Kernel Version : 3.10.23
[    1.417693] [4294892648][MAD_ALSA][001728]     6ALSA Kernel Version : XX.XX.XX
[    1.417701] [4294892648][MAD_ALSA][001732]     6MStar ALSA Driver Version : 3.1.13 (branch)
[    1.417708] [4294892648][MAD_ALSA][001733]     6Initiate MStar ALSA driver engine
[    1.417718] [4294892648][MAD_ALSA][001598]     6Go to register MStar ALSA driver
[    1.445862] [4294892655][MAD_ALSA][001662]     6MStar ALSA driver is registered to slot 0
[    1.463067] [4294892659][MAD_ALSA][005078]     6Initiate MStar ALSA core driver (customized)
[    1.463087] [4294892659][MAD_ALSA][000286]     6Hal Driver 'MAD MUJI' is hooked.
[    1.463094] [4294892659][MAD_ALSA][000287]     6MStar Core Version : 3.1.20
[    1.510794] UMP: UMP device driver r5p0-01rel0-CL1239673 loaded
[    1.542213] Mali: Mali device driver loaded
[    1.633326] utopia_proc_ioctl: setModule : 42  
[    1.642288] [mstar_fb_ioctl] Pool: GOP_0 bus_addr:b5500000 Size:b400000 PA_Addr:95500000 pool_base:a1000000
[    1.642309] [MDrv_GOP_CreateMemoryPool] Pool: GOP_0 Size:b400000 Addr:a1000000
[    1.642339] [mstar_fb_ioctl] Pool_id: 0
[    1.644367] utopia_proc_ioctl: setModule : 12  
[    1.644436] MDrv_PNL_Init u32PnlRiuBaseAddr = fd200000
[    1.644443] MDrv_PNL_Init u32PMRiuBaseAddr = fd000000
[    1.675150] utopia_proc_ioctl: setModule : 6  
[    1.676134] utopia_proc_ioctl: setModule : 5  
[    1.676189] 
[GOP INFO] gop open
[    2.311023] utopia_proc_ioctl: setModule : 42  
[    2.311314] utopia_proc_ioctl: setModule : 12  
[    2.311347] MDrv_PNL_Init u32PnlRiuBaseAddr = fd200000
[    2.311353] MDrv_PNL_Init u32PMRiuBaseAddr = fd000000
[    2.311998] utopia_proc_ioctl: setModule : 6  
[    2.312866] utopia_proc_ioctl: setModule : 5  
[    2.312918] 
[GOP INFO] gop open
[    2.322023] utopia_proc_ioctl: setModule : 36  
[    6.495466] input: CHECK INPUT as /devices/virtual/input/input0
[    6.512852] sh (787): /proc/787/oom_adj is deprecated, please use /proc/787/oom_score_adj instead.
[   10.815852] [SBM] All components to be included in the snapshot image are sync-ed
[   11.969789] PM: Basic memory bitmaps created
[   11.969806] PM: Syncing filesystems ... done.
[   11.969920] Freezing user space processes ... (elapsed 0.001 seconds) done.
[   11.971367] PM: Preallocating image memory... done (allocated 66592 pages)
[   12.283737] PM: Allocated 266368 kbytes in 0.31 seconds (859.25 MB/s)
[   12.283747] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[   12.285286] Suspending console(s) (use no_console_suspend to debug)
[   12.286134] [ mstar_mci_suspend() Ln.2409 ] eMMC, suspend + 
[   12.287161] [ mstar_mci_suspend() Ln.2413 ] eMMC, suspend -, 0h
[   12.287231] mstar_emac_drv_suspend
[   12.287568] RBQP_BASE = 3fa04000
[   12.287603] Mstar_emac: => Take 169 ms to reset EMAC!
[   12.287637] PM: freeze of devices complete after 2.339 msecs
[   12.287798] PM: late freeze of devices complete after 0.156 msecs
[   12.288226] PM: noirq freeze of devices complete after 0.423 msecs
[   12.288229] Disabling non-boot CPUs ...
[   12.288865] Function = platform_mstar_cpu_die, Line = 122, [cpu1] CPU1: shutdown
[   12.288869] CPU1: shutdown
[   12.290191] Function = platform_mstar_cpu_die, Line = 122, [cpu2] CPU2: shutdown
[   12.290196] CPU2: shutdown
[   12.291469] Function = platform_mstar_cpu_die, Line = 122, [cpu3] CPU3: shutdown
[   12.291473] CPU3: shutdown
[   12.292112] [GPIOStr][354] Kernel STR Suspend Start!!!!!
[   12.292112] [GPIOStr][357] Kernel STR Suspend End!!!!!
[   12.292112] [HWI2CStr][438] Kernel STR Suspend Start!!!!!
[   12.292112] [HWI2CStr][442] Kernel STR Suspend End!!!!!
[   12.292112] [GFXStr][3504] Kernel STR Suspend Start!!!!!
[   12.292112] [GFXStr][3506] Kernel STR Suspend End!!!!!
[   12.292112] [GOPStr][9799] Kernel STR Suspend Start!!!!!
[   12.292112] [GOPStr][9801] Kernel STR Suspend End!!!!!
[   12.292112] mstar_fb_savePM(),564 Suspend start 
[   12.292112] mstar_fb_savePM(),634 Suspend End 
[   12.292112] PM: Creating hibernation image:
[   12.292112] PM: Need to copy 66042 pages
[   12.292112] PM: Normal pages needed: 19868 + 1024, available pages: 109103
[   12.292112] mstar_fb_restorePM(),641 Resume start 
[   12.292112] [MDrv_GOP_CreateMemoryPool] Pool: GOP_0 Size:b400000 Addr:a1000000
[   12.292112] mstar_fb_restorePM(),711 Resume end 
[   12.292112] [GPIOStr][362] Kernel STR Resume Start!!!!!
[   12.292112] [GPIOStr][365] Kernel STR Resume End!!!!!
[   12.292112] [HWI2CStr][447] Kernel STR Resume Start!!!!!
[   12.292112] [HWI2CStr][450] Kernel STR Resume End!!!!!
[   12.292112] [GFXStr][3510] Kernel STR Resume Start!!!!!
[   12.292112] [GFXStr][3512] Kernel STR Resume End!!!!!
[   12.292112] [GOPStr][9805] Kernel STR Resume Start!!!!!
[   12.292112] [GOPStr][9807] Kernel STR Resume End!!!!!
[   12.292226] 
prepare smp cpus
[   12.292299] <>
[   12.292300] Enabling non-boot CPUs ...
[   12.292421] CPU1: Booted secondary processor
[   12.292754] pen_release = 0x00000001, addr= 0x80851c0c, pen_release ptr = 0x00000001
 
[   12.292754] CPU1 is up
[   12.292814] CPU2: Booted secondary processor
[   12.293065] pen_release = 0x00000002, addr= 0x80851c0c, pen_release ptr = 0x00000002
 
[   12.293066] CPU2 is up
[   12.293127] CPU3: Booted secondary processor
[   12.293455] pen_release = 0x00000003, addr= 0x80851c0c, pen_release ptr = 0x00000003
 
[   12.293456] CPU3 is up
[   12.293759] PM: noirq restore of devices complete after 0.295 msecs
[   12.294108] PM: early restore of devices complete after 0.085 msecs
[   12.442398] mstar_emac_drv_resume
[   12.442472] Mstar_emac: [ PHY Addr ] ==> :0
[   12.442809] RBQP_BASE = 3fa04000
[   12.442900] lock
[   12.442902] eMMC, resume +
[   12.442925] unlock
[   12.508695] 
eMMC: HS400 200MHz 
[   12.509052] eMMC, resume -
[   12.509641] [DVFS] OSC = 249, SIDD = 180
[   12.509643] [DVFS] This is Not FastIC 
[   12.510501] PM: restore of devices complete after 68.176 msecs
[   12.510778] PM: Image restored successfully.
[   12.510783] Restarting tasks ... done.
[   12.511610] PM: Basic memory bitmaps freed
[   12.513435] [SBM] Making done !!!
[   12.756096] EXT4-fs (mmcblk0p45): recovery complete
[   12.756646] EXT4-fs (mmcblk0p45): mounted filesystem with ordered data mode. Opts: data=ordered
[   12.861762] EXT4-fs (mmcblk0p46): recovery complete
[   12.862338] EXT4-fs (mmcblk0p46): mounted filesystem with ordered data mode. Opts: data=ordered
[   12.910177] EXT4-fs (mmcblk0p47): recovery complete
[   12.910681] EXT4-fs (mmcblk0p47): mounted filesystem with ordered data mode. Opts: data=ordered
[   13.038507] [SBM] snapshot_boot_ready(tv) is done...
[   13.048084] EXT4-fs (mmcblk0p15): recovery complete
[   13.048706] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: (null)
[   13.176618] utopia_proc_ioctl: setModule : 18  
[   13.176640] 
[MIU INFO] miu open
[   13.177812] utopia_proc_ioctl: setModule : 42  
[   13.183865] utopia_proc_ioctl: setModule : 31  
[   13.263082] [SBM] All components are being resumed...
[   13.295097] [SBM] configd is resumed (snapshot boot)
[   13.183884] 
[HWI2C INFO] hwi2c open
[   13.302660] !!! [VIF]nmsVifAdcInitial done !!!()
[   13.307372] [SBM] mvpdwin is resumed (snapshot boot)
[   13.312522] [SBM] tvwin is resumed (snapshot boot)
[   13.316948] [SBM] wam is resumed (snapshot boot)
[   13.430715] [SBM] snapshot_boot_ready(configd) is done...
[   13.457374] utopia_proc_ioctl: setModule : 45  
[   13.537643]  [AUDIO][UTOPIA][HAL_SIF_TriggerSifPLL_INIT] [454] [bADCFromVifPathEnabled = 1]  
[   13.593590] MDrv_AUDIO_SeSystemLoadCode() 
[   13.685594] audio DSP_SE LoadCode success..
[   13.701629] 
 === _MApi_AUDIO_PcmMixer_Init === 
[   13.701650] [[utopia]]      _MApi_AUDIO_PcmMixer_Init: The base address of Element Info is 0x23CF8000, and each size is 72
[   13.701658] [[utopia]]      _MApi_AUDIO_PcmMixer_Init: The base address of Element Buffer is 0x23CF9000, and each size is 61440
[   13.701666] [[utopia]]      _MApi_AUDIO_PcmMixer_Init: The base address of Mixed1 Buffer is 0x23D71000, and size is 16384
[   13.701674] [[utopia]]      _MApi_AUDIO_PcmMixer_Init: The base address of Mixed2 Buffer is 0x23D75000, and size is 16384
[   13.701833] PCM Mixer Version : 1.0.2
[   13.703321] input: LGE RCU as /devices/virtual/input/input1
[   13.705856] 
 === _MApi_AUDIO_PcmMixer_Thread === 
[   13.705875] [[utopia]]      _MApi_AUDIO_PcmMixer_Thread: Start!
[   13.723064] utopia_proc_ioctl: setModule : 27  
[   13.725044] utopia_proc_ioctl: setModule : 29  
[   13.732587] [HAL_TSP_CPU_SetBase][3776] load firmware (address, size) = (0x22d00000, 0x00005484)
[   13.732601] firmware 111 0x22d00000 0x00000022 0x0000d000
[   13.745012] utopia_proc_ioctl: setModule : 3  
[   13.745076] [HAL_DSCMB_SetBank][358] Set bank 0xfd200000
[   13.753737] utopia_proc_ioctl: setModule : 12  
[   13.754064] [PNL_adp_Ioctl][428]
[   13.792567] utopia_proc_ioctl: setModule : 8  
[   13.792580] XC_adp_Init
[   13.792748] UtopiaOpen PNL failed
[   13.806070] [AUDIO UTOPIA SIF] u8Return(0x1)
[   13.813650] [Hal_SC_sw_db, 2090] bDynamicScalingEnable0 
[   13.813674] [Hal_SC_sw_db, 2090] bDynamicScalingEnable0 
[   13.821564] [AUDIO UTOPIA SIF] u8Return(0x1)
[   13.825021] utopia_proc_ioctl: setModule : 26  
[   13.843880] utopia_proc_ioctl: setModule : 7  
[   13.843909] [VE info] VE open
[   13.849384] utopia_proc_ioctl: setModule : 14  
[   13.872211] utopia_proc_ioctl: setModule : 28  
[   13.872224] AVD_adp_Init
[   13.872230] AVD_adp_Init
[   13.872243] 
[AVD INFO]AVD open 
[   13.897170] [Hal_HDCP_initproductionkey][3184]Start!
[   13.897406] [Hal_HDCP_initproductionkey][3282]End!
[   13.975325] 
 === _MApi_AUDIO_PcmMixer_Open === 
[   13.975347] 
 === _MApi_AUDIO_PcmMixer_Open , return ID(0)=== 
[   13.975397] 
 === _MApi_AUDIO_PcmMixer_Set set volume (0x60) === 
[   14.107999] utopia_proc_ioctl: setModule : 34  
[   14.108018] 
[PWM INFO] pwm openInit PWM0
[   14.108036] Init PWM1
[   14.407260] [SBM] snapshot_boot_ready(mvpdwin) is done...
[   14.409667] [SBM] snapshot_boot_ready(tvwin) is done...
[   14.427651] [SBM] snapshot_boot_ready(wam) is done...
[   14.430484] MDrv_PNL_Init u32PnlRiuBaseAddr = fd200000
[   14.430499] MDrv_PNL_Init u32PMRiuBaseAddr = fd000000
[   14.430889] utopia_proc_ioctl: setModule : 6  
[   14.431996] utopia_proc_ioctl: setModule : 5  
[   14.432058] 
[GOP INFO] gop open
[   15.352237] HAL_VPU_EX_GetFreeStream  eStreamType:3  pVPUHalContext->_stVPUStream[i].eDecodertype:0
[   15.352251] u32VPUStreamId:40  u32MVDStreamId:40
[   15.352259] =========> vdec_u8Idx=0x0, u32VdecStreamId=04040
[   15.401580] MApi_VDEC_EX_V2_Init  u8Idx:0  eSrcMode:0  CodecType:1
[   15.401594] frameBufAddr:81600000  frameBufSize:2800000
[   15.401601] esbufaddr:80600000  esbufsize:800000
[   15.401612] HAL_VPU_EX_SetDbgLevel eLevel=0x0
[   15.401645] MVD pTaskInfo->u8HalId:0  BBU used:0
[   15.442729] MApi_VDEC_EX_V2_Init  u8Idx:0  Init Done
[   15.473270]  Open DecId 0 by Gpid 731 
[   15.628749] input: Bluetooth-manager as /devices/virtual/input/input2
[   16.050585]  Release DecID 0 by Gpid 731 
[   16.057585]  Open DecId 0 by Gpid 731 
[   17.170681] [SBM] snapshot_boot_ready(tvwin) is done...
[   17.198913] Mstar_ehc_init version:20150122
[   17.198986] Mstar-ehci-2 H.W init
[   17.198992] Titania3_series_start_ehc start
[   17.198999] [USB] config miu select [30] [74] [ff] ][ff]
[   17.200028] get rterm trim value: 0xd
[   17.200043] BC disable 
[   17.200049] utmi off
[   17.200056] [USB] Mstar-ehci-2 irq --> 226
[   17.200068] Mstar-ehci-2 Mstar-ehci-2.1: Mstar EHCI
[   17.200099] Mstar-ehci-2 Mstar-ehci-2.1: new USB bus registered, assigned bus number 1
[   17.200201] Mstar-ehci-2 Mstar-ehci-2.1: irq 226, io mem 0xfd201a00
[   17.219380] hub 1-0:1.0: USB hub found
[   17.219425] hub 1-0:1.0: 1 port detected
[   17.221831] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   17.221903] Mstar-ehci-1 H.W init
[   17.221911] Titania3_series_start_ehc start
[   17.221920] [USB] config miu select [30] [74] [ff] ][ff]
[   17.223001] get rterm trim value: 0xd
[   17.223016] BC disable 
[   17.223022] utmi off
[   17.223033] [USB] Mstar-ehci-1 irq --> 199
[   17.223045] Mstar-ehci-1 Mstar-ehci-1.0: Mstar EHCI
[   17.223076] Mstar-ehci-1 Mstar-ehci-1.0: new USB bus registered, assigned bus number 2
[   17.223175] Mstar-ehci-1 Mstar-ehci-1.0: irq 199, io mem 0xfd204800
[   17.239403] hub 2-0:1.0: USB hub found
[   17.239441] hub 2-0:1.0: 1 port detected
[   17.247004] Mstar-ehci-3 H.W init
[   17.247022] Titania3_series_start_ehc start
[   17.247030] [USB] config miu select [30] [74] [ff] ][ff]
[   17.248090] get rterm trim value: 0xd
[   17.248109] BC disable 
[   17.248115] utmi off
[   17.248123] [USB] Mstar-ehci-3 irq --> 229
[   17.248135] Mstar-ehci-3 Mstar-ehci-3.2: Mstar EHCI
[   17.248170] Mstar-ehci-3 Mstar-ehci-3.2: new USB bus registered, assigned bus number 3
[   17.248281] Mstar-ehci-3 Mstar-ehci-3.2: irq 229, io mem 0xfd227200
[   17.262388] hub 3-0:1.0: USB hub found
[   17.262430] hub 3-0:1.0: 1 port detected
[   17.266197] Mstar-ehci-4 H.W init
[   17.266212] Titania3_series_start_ehc start
[   17.266220] [USB] config miu select [30] [74] [ff] ][ff]
[   17.267283] get rterm trim value: 0xd
[   17.267300] BC disable 
[   17.267306] utmi off
[   17.267314] [USB] Mstar-ehci-4 irq --> 330
[   17.267327] Mstar-ehci-4 Mstar-ehci-4.3: Mstar EHCI
[   17.267361] Mstar-ehci-4 Mstar-ehci-4.3: new USB bus registered, assigned bus number 4
[   17.267455] Mstar-ehci-4 Mstar-ehci-4.3: irq 330, io mem 0xfd2a6000
[   17.289498] hub 4-0:1.0: USB hub found
[   17.289580] hub 4-0:1.0: 1 port detected
[   17.297604] Mstar-ehci-5 H.W init
[   17.297621] Titania3_series_start_ehc start
[   17.297629] [USB] config miu select [30] [74] [ff] ][ff]
[   17.298676] get rterm trim value: 0xd
[   17.298698] BC disable 
[   17.298704] utmi off
[   17.298716] [USB] Mstar-ehci-5 irq --> 328
[   17.298731] Mstar-ehci-5 Mstar-ehci-5.4: Mstar EHCI
[   17.298765] Mstar-ehci-5 Mstar-ehci-5.4: new USB bus registered, assigned bus number 5
[   17.298882] Mstar-ehci-5 Mstar-ehci-5.4: irq 328, io mem 0xfd2a6200
[   17.321676] hub 5-0:1.0: USB hub found
[   17.321728] hub 5-0:1.0: 1 port detected
[   17.328041] xHCI_890200 
[   17.328055] Mstar-xhci H.W init
[   17.328061] Mstar_xhc_init version:20141120
[   17.328080] 
 [ XHC: get efuse value: 0x9f1c9f1e ] 
[   17.328091] [USB] config miu select [30] [74] [ff] ][ff]
[   17.328112] utmi off
[   17.328126] Mstar-xhci-1 Mstar-xhci-1.0: Mstar xHCI Host Controller
[   17.328158] Mstar-xhci-1 Mstar-xhci-1.0: new USB bus registered, assigned bus number 6
[   17.328195] Supported page size register = 0x1
[   17.328415] Mstar-xhci-1 Mstar-xhci-1.0: irq 194, io mem 0xfd320000
[   17.332372] xHCI xhci_add_endpoint called for root hub
[   17.332388] xHCI xhci_check_bandwidth called for root hub
[   17.333053] hub 6-0:1.0: USB hub found
[   17.333095] hub 6-0:1.0: 2 ports detected
[   17.333327] Mstar-xhci-1 Mstar-xhci-1.0: Mstar xHCI Host Controller
[   17.333348] Mstar-xhci-1 Mstar-xhci-1.0: new USB bus registered, assigned bus number 7
[   17.336056] xHCI xhci_add_endpoint called for root hub
[   17.336073] xHCI xhci_check_bandwidth called for root hub
[   17.339627] utmi off
[   17.340511] hub 7-0:1.0: USB hub found
[   17.340554] hub 7-0:1.0: 2 ports detected
[   17.346580] usbcore: registered new interface driver usb-storage
[   17.465615] ==20150122==> hub_port_init 1 #0
[   17.465628] Plug in USB Port1
[   17.465636] utmi on
[   17.601608] usb 2-1: new high-speed USB device number 2 using Mstar-ehci-1
[   17.602118] utmi on
[   17.899961] Inserting bcm_dbus module 
[   17.942318] dbus_usbdev: probe of 2-1:1.0 failed with error -23
[   17.942350] dbus_usbdev: probe of 2-1:1.1 failed with error -23
[   17.947948] BT reset success
[   18.015842] otp boardtype = 0x1400 boardrev = 0x 1 rdlid = 0x3100
[   18.015876] dbus_get_fw_nvfile: request nvram bcm43242-1400-1.nvm
[   18.939162] bcm_rpc_up: waiting to be connected
[   18.944336] bcm_rpc_buf_recv_mgn_high: Recvd:3 Version: 0x6257316
State: 3 Session:105
[   18.944355] bcm_rpc_buf_recv_mgn_high: Reason: 0 Dongle Version: 0x6257316
[   18.944362] bcm_rpc_buf_recv_mgn_high: Connected!
[   18.966667] CFG80211-ERROR) wl_event_handler : 
[   18.966670] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wl_cfg80211_netdev_notifier_call : wdev= dev->ieee80211_ptr_is_NULL 
[   18.966685] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wl_cfg80211_netdev_notifier_call : wdev= dev->ieee80211_ptr_is_NULL 
[   18.966692] tsk Enter, tsk = 0x9b30145c
[   18.979222] wlan0: Broadcom BCMa8ea 802.11 Wireless Controller 6.37.115.22 (r559025)
[   18.979239] [dbus_usbos_probe:1315] devpath [1]
[   18.985499] usbcore: registered new interface driver dbus_usbdev
[   18.997145] BTUSB btusb_probe: failed to set iso intf to 0
[   19.014209] usbcore: registered new interface driver btusb
[   19.127142] Tuxera NTFS driver 3014.9.13 [Flags: R/W MODULE].
[   19.208322] Tuxera FAT 12/16/32 driver version 3014.9.10 [Flags: R/W MODULE].
[   19.246744] input: Bluetooth-manager as /devices/virtual/input/input3
[   19.341851] input: LGE M-RCU - Builtin [0] as /devices/virtual/input/input4
[   19.352682] input: LGE M-RCU - Builtin [1] as /devices/virtual/input/input5
[   19.368930] input: LGE M-RCU - Builtin [2] as /devices/virtual/input/input6
[   19.381660] input: Bluetooth-manager as /devices/virtual/input/input7
[   19.774218] utopia_proc_ioctl: setModule : 42  
[   20.213724] ==> hub_port_init_20141120 1 
[   20.213740] Plug in USB Port0
[   20.251608] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wl_cfg80211_netdev_notifier_call : wdev= dev->ieee80211_ptr_is_NULL 
[   20.251819] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wl_cfg80211_netdev_notifier_call : wdev= dev->ieee80211_ptr_is_NULL 
[   20.251895] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wl_cfg80211_netdev_notifier_call : wdev= dev->ieee80211_ptr_is_NULL 
[   20.263797] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wl_cfg80211_netdev_notifier_call : wdev= dev->ieee80211_ptr_is_NULL 
[   20.264179] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wl_cfg80211_netdev_notifier_call : wdev= dev->ieee80211_ptr_is_NULL 
[   20.357622] usb 7-1: new SuperSpeed USB device number 2 using Mstar-xhci-1
[   20.387089] usb-storage 7-1:1.0: USB Mass Storage device detected
[   20.401958] scsi0 : usb-storage 7-1:1.0
[   20.426653] scsi 0:0:0:0: Direct-Access     USB3.0   Super Speed      0214 PQ: 0 ANSI: 6
[   20.892016] [4294897516][MAD_ALSA][000559]     6Open 'subdevice #0'(0) of MStar ALSA playback device
[   20.892094] [4294897516][MAD_ALSA][000409]     6Open software timer.
[   20.892545] [4294897516][MAD_ALSA][000714]     6Configure PCM HW resource
[   20.892603] [4294897516][MAD_ALSA][003991]     6Target sample rate is 44100
[   20.892614] [4294897516][MAD_ALSA][004002]     6Target channel mode is 2
[   20.892624] [4294897516][MAD_ALSA][003567]     6Initiate MStar PCM Mixer7 engine
[   20.892652] [4294897516][MAD_ALSA][003621]     6Get MStar PCM Mixer7 Element on PCM Mixer Element 6
[   20.894673] [[utopia]]      

***** DMAReader(0) Buffer empty !! ***** 

[   20.900571] [4294897518][MAD_ALSA][000940]     6Wake up Playback Monitor 6
[   20.900605] [4294897518][MAD_ALSA][003781]     6***** PCM Mixer7 Buffer empty !! ***** 
[   20.938260] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wl_cfg80211_netdev_notifier_call : wdev= dev->ieee80211_ptr_is_NULL 
[   20.938437] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wl_cfg80211_netdev_notifier_call : wdev= dev->ieee80211_ptr_is_NULL 
[   20.977730] [4294897538][MAD_ALSA][003781]     6***** PCM Mixer7 Buffer empty !! ***** 
[   20.988074] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wl_cfg80211_netdev_notifier_call : wdev= dev->ieee80211_ptr_is_NULL 
[   20.988238] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wl_cfg80211_netdev_notifier_call : wdev= dev->ieee80211_ptr_is_NULL 
[   20.988248] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wl_cfg80211_netdev_notifier_call : wdev= dev->ieee80211_ptr_is_NULL 
[   21.056632] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[   21.058403] sd 0:0:0:0: [sda] Write Protect is off
[   21.058429] sd 0:0:0:0: [sda] Mode Sense: 47 00 00 08
[   21.058854] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   21.074821]  sda: unknown partition table
[   21.090841] sd 0:0:0:0: [sda] Attached SCSI disk
[   21.392838] CFG80211-ERROR) wl_android_priv_cmd : Unknown PRIVATE command CHIP_VER - ignored
[   21.477433] CFG80211-ERROR) wl_cfg80211_get_station : NOT assoc
[   21.490131] CFG80211-ERROR) wl_cfg80211_get_station : NOT assoc
[   23.301711] connect failed event=0 e->status 1 e->reason 0 
[   23.301745] CFG80211-ERROR) wl_bss_connect_done : Report connect result - connection failed
[   25.774014] tfat: fail_safe is enabled
[   25.774404] tfat error (device sda, pid 1500): read_fat_boot_sector(): Primary boot sector is invalid.
[   25.774422] tfat error (device sda, pid 1500): read_fat_boot_sector(): Mount option errors=recover not used.  Aborting without trying to recover.
[   25.774432] tfat error (device sda, pid 1500): fat_fill_super(): Not a FAT volume.
[   25.775196] FAT-fs (sda): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   25.775521] FAT-fs (sda): bogus number of reserved sectors
[   25.775532] FAT-fs (sda): Can't find a valid FAT filesystem
[   25.776605] FAT-fs (sda): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   25.776983] FAT-fs (sda): bogus number of reserved sectors
[   25.777003] FAT-fs (sda): Can't find a valid FAT filesystem
[   25.777855] tntfs: fail_safe is enabled
[   25.778223] tntfs error (device sda, pid 1500): read_ntfs_boot_sector(): Primary boot sector is invalid.
[   25.778236] tntfs error (device sda, pid 1500): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
[   25.778245] tntfs error (device sda, pid 1500): ntfs_fill_super(): Not an NTFS volume.
[   25.778895] NTFS-fs error (device sda): read_ntfs_boot_sector(): Primary boot sector is invalid.
[   25.778911] NTFS-fs error (device sda): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
[   25.778919] NTFS-fs error (device sda): ntfs_fill_super(): Not an NTFS volume.
[   25.779757] NTFS-fs error (device sda): read_ntfs_boot_sector(): Primary boot sector is invalid.
[   25.901818] [4294898769][MAD_ALSA][000725]     6Free PCM HW resource
[   25.901863] [4294898769][MAD_ALSA][000725]     6Free PCM HW resource
[   25.901873] [4294898769][MAD_ALSA][000641]     6Close 'subdevice #0'(0) of MStar ALSA playback device
[   25.922276] [4294898774][MAD_ALSA][000430]     6Close software timer.
[   25.924314] [4294898774][MAD_ALSA][003697]     6Exit MStar PCM Mixer7 engine
[   26.565292] usbcore: registered new interface driver portal
[   30.060904] Adding 404352k swap on /dev/zram0.  Priority:-1 extents:1 across:404352k SS
[   48.542885] utopia_proc_ioctl: setModule : 11  
[   48.542905]    DIP_adp_Init:59     
[   55.890632] wl_bss_connect_done succeeded with 2c:91:ab:ba:87:3d
[   56.102064] wl_bss_connect_done succeeded with 2c:91:ab:ba:87:3d
[   57.287391] input: LGE AllJoyn Remote as /devices/virtual/input/input8

@dimitrij2k
Copy link
Author

I suspect the reboot is caused by some important system service crashing, or similar. Are there any interesting logs in dmesg?

thx for the hint... dmesg is uploaded here... any other logs that can help to solve the problem?

@TBSniller TBSniller changed the title TV reboot after a few seconds (WebOS 2.x) (dile_vt) TV reboot after a few seconds // WebOS 2.x not supported Sep 25, 2022
@TBSniller TBSniller added the dile_vt Issues related to webOS low-level capture backend label Sep 25, 2022
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
dile_vt Issues related to webOS low-level capture backend
Projects
None yet
Development

No branches or pull requests

3 participants