You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I've been searching for a way to pass AI motion detection events from my Dahua NVR to my home automatiojn system for years and it looks like alarmserver might finally allow me to do this! I'm a techie but my programming skills are rusty. Can you suggest how I might configure alarmserver on my Rpi 4 to accomplish the following:
The Eisy has an MQTTT node server but I'm not familiar with how to configure it.
I would appreciate any help SO MUCH!
Ken
Here are some example commands I see for the NVR in the API. I see the camera channel number included but not the IVS rule number but the rules each have eventcodes like:SmartMotionHuman and SmartMotionVehicle
Example setup the alarm server http:https://192.168.1.108/cgi bin/configManager.cgi?action=setConfig&AlarmServer.Addres
s =as.ttt. AlarmServer.Enable =false
Subscribe to messages that event of code=eventCode happen.
Example http:https://192.168. 1 .108/cgi bin/eventManager.cgi?action=attach&codes=[AlarmLocal %2C
VideoMotion %2C SmartMotionHuman %2C CrossLineDetection
Other eventcodes:
SmartMotionHuman: human smart motion detection
SmartMotionVehicle Vehicle smart motion detection
CrossLineDetection tripwire event
CrossRegionDetection : intrusion event
reacted with thumbs up emoji reacted with thumbs down emoji reacted with laugh emoji reacted with hooray emoji reacted with confused emoji reacted with heart emoji reacted with rocket emoji reacted with eyes emoji
-
I've been searching for a way to pass AI motion detection events from my Dahua NVR to my home automatiojn system for years and it looks like alarmserver might finally allow me to do this! I'm a techie but my programming skills are rusty. Can you suggest how I might configure alarmserver on my Rpi 4 to accomplish the following:
receive an AI smart alarm from a specific camera channel and specific IVS rule from the NVR (not the cameras)
then send a get command of the form:
https://my.isy.io/api/ifttt/MotionDetectedFromIVSChan1Rule1/key/010101010101-c81f-4b53-92e8-010101010101
The Eisy has an MQTTT node server but I'm not familiar with how to configure it.
I would appreciate any help SO MUCH!
Ken
Here are some example commands I see for the NVR in the API. I see the camera channel number included but not the IVS rule number but the rules each have eventcodes like:SmartMotionHuman and SmartMotionVehicle
Example setup the alarm server
http:https://192.168.1.108/cgi bin/configManager.cgi?action=setConfig&AlarmServer.Addres
s =as.ttt. AlarmServer.Enable =false
Subscribe to messages that event of code=eventCode happen.
Example
http:https://192.168. 1 .108/cgi bin/eventManager.cgi?action=attach&codes=[AlarmLocal %2C
VideoMotion %2C SmartMotionHuman %2C CrossLineDetection
Other eventcodes:
SmartMotionHuman: human smart motion detection
SmartMotionVehicle Vehicle smart motion detection
CrossLineDetection tripwire event
CrossRegionDetection : intrusion event
Beta Was this translation helpful? Give feedback.
All reactions