Development of a system for simultaneous recording of multiple bio-signals in a non invasive way
-
Updated
Jan 23, 2023 - Python
Development of a system for simultaneous recording of multiple bio-signals in a non invasive way
An add-on for the Mozilla WebThings Gateway that allows it to connect to Xiaomi's cheap "MiFlora|" or "Flower Mate" or "Flower Care" bluetooth plant health devices
Getting readings from moisture sensor using Arduino
Check the moisture of a plant using a tiny organic waste container.
Arduino, Raspberry Pi, ESP32, ESP8266 Node MCU projects
An arduino based system that takes input from a moisture sensor and lights a LED based on the amount of water in the ground
My Smart Plants helps you to keep track of your plants' moisture level and send you notifications when the level goes under a certain value.
This is the final project for ECE 1000, Explorations in ECE, which was taught by Dr. Bhattacharya at Tennessee Tech.
Simple tool to get datas from Xiaomi Mi temperature and moisture sensor
Automatic Plant Watering System using a Capacitive Moisture Sensor
Arduino sketch the pulls temperature and humidity data from a DHT11 sensor and moisture sensors.
The Tiny Plant Sensor 🌱 is a low-power sensor designed around the Attiny85 microcontroller and powered by a CR2032 coin cell battery. It is designed to monitor the moisture level of a plant and provide a LED indication when watering is required.
Misc scripts to read/write various physical sensors
Thirst is a battery operated system that can monitor soil moisture and send notifications via email in case the moisture is above or below a pre-configured threshold.
IoT devices related to the topic of smart irrigation for integration into smart homes
Arduino sketch to control soil moisture and temperature
Autonomous plant watering robot
Smart Dustbin that can separate Wet and Dry waste . It also notifies the authorities (workers) when dust-bin is full.
This project is for keeping moisture under a user define limit. If the moisture is lower than the limit, watring system will be made ON (to increase the moisture level) and if it is higher than the limit, the watering system will be turned off.
A smart system to water your plants daily depending on the moisture of the soil. It has a fully functionl web interface, monitors the water level via an ultrasonic sensor and sends you an email if it's getting empty.
Add a description, image, and links to the moisture-sensor topic page so that developers can more easily learn about it.
To associate your repository with the moisture-sensor topic, visit your repo's landing page and select "manage topics."