tcconfig
is a Simple tc
command wrapper.
Easy to set up traffic control of network bandwidth/latency/packet-loss to a network interface.
Traffic control can be specified network to apply to:
- Outgoing/Incoming packets
- Certain IP address/network and port
The following parameters can be set to network interfaces.
- Network bandwidth rate [G/M/K bps]
- Network latency [milliseconds]
- Packet loss rate [%]
- Packet corruption rate [%]
tcset
is a command to impose traffic control to a network interface (device).
# tcset --device eth0 --rate 100k
# tcset --device eth0 --delay 100
# tcset --device eth0 --loss 0.1
# tcset --device eth0 --rate 100k --delay 100 --loss 0.1
# tcset --device eth0 --delay 100 --network 192.168.0.10
# tcset --device eth0 --delay 100 --network 192.168.0.0/24 --port 80
tcdel
is a command to delete traffic control from a network
interface (device).
# tcdel --device eth0
tcshow
is a command to display traffic control to network interface(s).
# tcset --device eth0 --delay 10 --delay-distro 2 --loss 0.01 --rate 0.25M --network 192.168.0.10 --port 8080
# tcset --device eth0 --delay 1 --loss 0.02 --rate 500K --direction incoming
# tcshow --device eth0
{
"eth0": {
"outgoing": {
"network=192.168.0.10/32, port=8080": {
"delay": "10.0",
"loss": "0.01",
"rate": "250K",
"delay-distro": "2.0"
},
"network=0.0.0.0/0": {}
},
"incoming": {
"network=0.0.0.0/0": {
"delay": "1.0",
"loss": "0.02",
"rate": "500K"
}
}
}
}
More examples are available at https://tcconfig.readthedocs.org/en/latest/pages/usage/index.html
tcconfig
can be installed via
pip (Python package manager).
sudo pip install tcconfig
- iproute2 (required for tc command)
- sch_netem
Dependency python packages are automatically installed during
tcconfig
installation via pip.
https://tcconfig.readthedocs.org/en/latest/
tcset command failed with an error message RTNETLINK answers: No such file or directory.
The cause of this error is sch_netem kernel module is not loaded in your system. Execute the following command to solve this problem:
# modprobe sch_netem
The command is loading the sch_netem module. If the command failed with below message, you need to install additional kernel module.
# modprobe: FATAL: Module sch_netem not found in directory /lib/modules/xxxxxx
Execute the following command to install kernel modules (includes the sch_netem module).
# dnf install kernel-modules-extra
(in the case of RHEL/CentOS/Fedora). After that, re-execute modprobe sch_netem command.
# modprobe sch_netem
#