Please consider following this project's author, Thom-x, and consider starring the project to show your ❤️ and support.
Docker image of Fr24feed, FlightAware and dump1090.
Feed FlightRadar24 and FlightAware, allow you to see the positions of aircrafts on a map.
- Docker
- RTL-SDR DVBT USB Dongle (RTL2832)
Run :
docker run -d -p 8080:8080 -p 8754:8754 \
--device=/dev/bus/usb:/dev/bus/usb \
-e "FR24FEED_FR24KEY=MY_SHARING_KEY" \
-e "PIAWARE_FEEDER_DASH_ID=MY_FEEDER_ID" \
-e "HTML_SITE_LAT=MY_SITE_LAT" \
-e "HTML_SITE_LON=MY_SITE_LON" \
-e "HTML_SITE_NAME=MY_SITE_NAME" \
-e "PANORAMA_ID=MY_PANORAMA_ID" \
thomx/fr24feed-piaware
Go to https://dockerhost:8080 to view a map of reveived data. Go to https://dockerhost:8754 to view fr24feed configuration panel.
Note : remove -e "PANORAMA_ID=MY_PANORAMA_ID"
from the command line if you don't want to use this feature.
To disable starting a service you can add an environement variable :
Environment Variable | Value | Description |
---|---|---|
SERVICE_ENABLE_DUMP1090 |
false |
Disable dump1090 service |
SERVICE_ENABLE_PIAWARE |
false |
Disable piaware service |
SERVICE_ENABLE_FR24FEED |
false |
Disable fr24feed service |
SERVICE_ENABLE_HTTP |
false |
Disable http service |
Ex : -e "SERVICE_ENABLE_HTTP=false"
Resgister on https://flightaware.com/account/join/.
Run :
docker run -it --rm \
-e "SERVICE_ENABLE_DUMP1090=false" \
-e "SERVICE_ENABLE_HTTP=false" \
-e "SERVICE_ENABLE_FR24FEED=false" \
thomx/fr24feed-piaware /bin/bash
When the container starts you should see the feeder id, note it. Wait 5 minutes and you should see a new receiver at https://fr.flightaware.com/adsb/piaware/claim (use the same IP as your docker host), claim it and exit the container.
Add the environment variable PIAWARE_FEEDER_DASH_ID
with your feeder id.
Environment Variable | Configuration property | Default value |
---|---|---|
PIAWARE_FEEDER_DASH_ID |
feeder-id |
YOUR_FEEDER_ID |
PIAWARE_RECEIVER_DASH_TYPE |
receiver-type |
other |
PIAWARE_RECEIVER_DASH_HOST |
receiver-host |
127.0.0.1 |
PIAWARE_RECEIVER_DASH_PORT |
receiver-port |
30005 |
Ex : -e "PIAWARE_RECEIVER_DASH_TYPE=other"
Run :
docker run -it --rm \
-e "SERVICE_ENABLE_DUMP1090=false" \
-e "SERVICE_ENABLE_HTTP=false" \
-e "SERVICE_ENABLE_PIAWARE=false" \
-e "SERVICE_ENABLE_FR24FEED=false" \
thomx/fr24feed-piaware /bin/bash
Then : /fr24feed/fr24feed_amd64/fr24feed --signup
and follow the instructions, for technical steps, your answer doesn't matter we just need the sharing key at the end.
Finally to see the sharing key run cat /etc/fr24feed.ini
, you can now exit the container.
Add the environment variable FR24FEED_FR24KEY
with your sharing key.
Environment Variable | Configuration property | Default value |
---|---|---|
FR24FEED_RECEIVER |
receiver |
beast-tcp |
FR24FEED_FR24KEY |
fr24key |
YOUR_KEY_HERE |
FR24FEED_HOST |
host |
127.0.0.1:30005 |
FR24FEED_BS |
bs |
no |
FR24FEED_RAW |
raw |
no |
FR24FEED_LOGMODE |
logmode |
1 |
FR24FEED_LOGPATH |
logpath |
/tmp |
FR24FEED_MLAT |
mlat |
yes |
FR24FEED_MLAT_DASH_WITHOUT_DASH_GPS |
mlat-without-gps |
yes |
Ex : -e "FR24FEED_FR24KEY=0123456789"
Note : you can add any property to either fr24feed or piaware configuration file by adding an environment variable starting with PIAWARE_...
or FR24FEED_...
.
Example :
Environment Variable | Configuration property | value | Configuration file |
---|---|---|---|
FR24FEED_TEST=value |
test |
value |
fr24feed.init |
FR24FEED_TEST_DASH_TEST=value |
test-test |
value2 |
fr24feed.init |
PIAWARE_TEST=value |
test |
value |
piaware.conf |
Environment Variable | Default value |
---|---|
HTML_SITE_LAT |
45.0 |
HTML_SITE_LON |
9.0 |
HTML_SITE_NAME |
My Radar Site |
Ex : -e "HTML_SITE_NAME=My site"
If you don't need this feature ignore this.
Create a panorama for your receiver location on https://www.heywhatsthat.com.
Environment Variable | Default value | Description |
---|---|---|
PANORAMA_ID |
Panorama id | |
PANORAMA_ALTS |
1000,10000 |
Comma seperated list of altitudes in meter |
Note : the panorama id value correspond to the URL at the top of the panorama https://www.heywhatsthat.com/?view=XXXX, altitudes are in meters, you can specify a list of altitudes.
Ex : -e "PANORAMA_ID=FRUXK2G7"
If you don't want to download the limit every time you bring up the container you can download https://www.heywhatsthat.com/api/upintheair.json?id=${PANORAMA_ID}&refraction=0.25&alts=${PANORAMA_ALTS}
as upintheair.json and mount it in /usr/lib/fr24/public_html/upintheair.json
.
Clone this repo.
docker build .