Please consider following this project's original (x86_64) author, Thom-x, and consider starring the project to show your ❤️ and support.

Docker image of Fr24feed, FlightAware and dump1090.

Feed FlightRadar24 and FlightAware, allow you to see the positions of aircrafts on a map.

• Docker
• RTL-SDR DVBT USB Dongle (RTL2832)

Run :

docker run -d -p 8080:8080 -p 8754:8754 \
	--device=/dev/bus/usb:/dev/bus/usb \
	-e "FR24FEED_FR24KEY=MY_SHARING_KEY" \
	-e "PIAWARE_FEEDER_DASH_ID=MY_FEEDER_ID" \
	-e "HTML_SITE_LAT=MY_SITE_LAT" \
	-e "HTML_SITE_LON=MY_SITE_LON" \
	-e "HTML_SITE_NAME=MY_SITE_NAME" \
	-e "PANORAMA_ID=MY_PANORAMA_ID" \
	thomx/fr24feed-piaware

Go to http:https://dockerhost:8080 to view a map of reveived data. Go to http:https://dockerhost:8754 to view fr24feed configuration panel.

Note : remove -e "PANORAMA_ID=MY_PANORAMA_ID" from the command line if you don't want to use this feature.

To disable starting a service you can add an environement variable :

Ex : -e "SERVICE_ENABLE_HTTP=false"

Resgister on https://flightaware.com/account/join/.

Run :

docker run -it --rm \
	-e "SERVICE_ENABLE_DUMP1090=false" \
	-e "SERVICE_ENABLE_HTTP=false" \
	-e "SERVICE_ENABLE_FR24FEED=false" \
	thomx/fr24feed-piaware /bin/bash

When the container starts you should see the feeder id, note it. Wait 5 minutes and you should see a new receiver at https://fr.flightaware.com/adsb/piaware/claim (use the same IP as your docker host), claim it and exit the container.

Add the environment variable PIAWARE_FEEDER_DASH_ID with your feeder id.

Ex : -e "PIAWARE_RECEIVER_DASH_TYPE=other"

Run :

docker run -it --rm \
	-e "SERVICE_ENABLE_DUMP1090=false" \
	-e "SERVICE_ENABLE_HTTP=false" \
	-e "SERVICE_ENABLE_PIAWARE=false" \
	-e "SERVICE_ENABLE_FR24FEED=false" \
	thomx/fr24feed-piaware /bin/bash

Then : /fr24feed/fr24feed_armhf/fr24feed --signup and follow the instructions, for technical steps, your answer doesn't matter we just need the sharing key at the end.

Finally to see the sharing key run cat /etc/fr24feed.ini, you can now exit the container.

Add the environment variable FR24FEED_FR24KEY with your sharing key.

Ex : -e "FR24FEED_FR24KEY=0123456789"

Note : you can add any property to either fr24feed or piaware configuration file by adding an environment variable starting with PIAWARE_... or FR24FEED_....

Example :

Ex : -e "HTML_SITE_NAME=My site"

If you don't need this feature ignore this.

Create a panorama for your receiver location on http:https://www.heywhatsthat.com.

Note : the panorama id value correspond to the URL at the top of the panorama http:https://www.heywhatsthat.com/?view=XXXX, altitudes are in meters, you can specify a list of altitudes.

Ex : -e "PANORAMA_ID=FRUXK2G7"

If you don't want to download the limit every time you bring up the container you can download http:https://www.heywhatsthat.com/api/upintheair.json?id=${PANORAMA_ID}&refraction=0.25&alts=${PANORAMA_ALTS} as upintheair.json and mount it in /usr/lib/fr24/public_html/upintheair.json.

Clone this repo.

docker build .