airgap doesn't exist when installed via ansible-galaxy

[iameli]

Expected Behavior

I can use airgap through ansible-galaxy and thus use this project. Per my understanding, airgap is the step that actually downloads the k3s binary and is thus required.

Current Behavior

> ansible-playbook plays/site.yml
ERROR! the role 'techno_tim.k3s_ansible.airgap' was not found in /Users/iameli/code/ai-demo/plays/roles:/Users/iameli/code/ai-demo/roles:/Users/iameli/code/ai-demo/plays

The error appears to be in '/Users/iameli/code/ai-demo/plays/site.yml': line 14, column 7, but may
be elsewhere in the file depending on the exact syntax problem.

The offending line appears to be:

    - role: techno_tim.k3s_ansible.prereq
    - role: techno_tim.k3s_ansible.airgap
      ^ here

Steps to Reproduce

Make collections/requirements.yml:

collections:
  - name: ansible.utils
  - name: community.general
  - name: ansible.posix
  - name: kubernetes.core
  - name: https://github.com/techno-tim/k3s-ansible.git
    type: git
    version: master

Run

ansible-galaxy collection install -r ./collections/requirements.yml

Set up a simple plays/site.yml

- name: Cluster prep
  hosts: k3s_cluster
  gather_facts: true
  become: true
  roles:
    - role: techno_tim.k3s_ansible.prereq
    - role: techno_tim.k3s_ansible.airgap

- name: Setup K3S server
  hosts: master
  become: true
  roles:
    - role: techno_tim.k3s_ansible.k3s_server

Context (variables)

Operating system: macOS

Hardware: MacBook M1

Variables Used

all.yml

---
k3s_version: v1.28.5+k3s1
# this is the user that has ssh access to these machines
systemd_dir: /etc/systemd/system

# Set your timezone
system_timezone: "Etc/UTC"

# interface which will be used for flannel
# flannel_iface: "{{ flannel_ }}"

# apiserver_endpoint is virtual ip-address which will be configured on each master
apiserver_endpoint: "192.168.30.222"

# k3s_token is required  masters can talk together securely
# this token should be alpha numeric only
k3s_token: "redacted"

# The IP on which the node is reachable in the cluster.
# Here, a sensible default is provided, you can still override
# it for each of your hosts, though.
k3s_node_ip: '{{ ansible_facts[flannel_iface]["ipv4"]["address"] }}'

# Disable the taint manually by setting: k3s_master_taint = false
k3s_master_taint: "{{ true if groups['node'] | default([]) | length >= 1 else false }}"

# these arguments are recommended for servers as well as agents:
extra_args: >-
  --flannel-iface={{ flannel_iface }}
  --node-ip={{ k3s_node_ip }}

# change these to your liking, the only required are: --disable servicelb, --tls-san {{ apiserver_endpoint }}
extra_server_args: >-
  {{ extra_args }}
  {{ '--node-taint node-role.kubernetes.io/master=true:NoSchedule' if k3s_master_taint else '' }}
  --tls-san {{ apiserver_endpoint }}
  --disable servicelb
  --disable traefik
extra_agent_args: >-
  {{ extra_args }}

# image tag for kube-vip
kube_vip_tag_version: "v0.5.12"

# metallb type frr or native
metal_lb_type: "native"

# metallb mode layer2 or bgp
metal_lb_mode: "layer2"

# bgp options
# metal_lb_bgp_my_asn: "64513"
# metal_lb_bgp_peer_asn: "64512"
# metal_lb_bgp_peer_address: "192.168.30.1"

# image tag for metal lb
metal_lb_speaker_tag_version: "v0.13.9"
metal_lb_controller_tag_version: "v0.13.9"

# metallb ip range for load balancer
metal_lb_ip_range: "192.168.30.80-192.168.30.90"

# Only enable if your nodes are proxmox LXC nodes, make sure to configure your proxmox nodes
# in your hosts.ini file.
# Please read https://gist.github.com/triangletodd/02f595cd4c0dc9aac5f7763ca2264185 before using this.
# Most notably, your containers must be privileged, and must not have nesting set to true.
# Please note this script disables most of the security of lxc containers, with the trade off being that lxc
# containers are significantly more resource efficent compared to full VMs.
# Mixing and matching VMs and lxc containers is not supported, ymmv if you want to do this.
# I would only really recommend using this if you have partiularly low powered proxmox nodes where the overhead of
# VMs would use a significant portion of your available resources.
proxmox_lxc_configure: false
# the user that you would use to ssh into the host, for example if you run ssh some-user@my-proxmox-host,
# set this value to some-user
proxmox_lxc_ssh_user: root
# the unique proxmox ids for all of the containers in the cluster, both worker and master nodes
proxmox_lxc_ct_ids:
  - 200
  - 201
  - 202
  - 203
  - 204

# Only enable this if you have set up your own container registry to act as a mirror / pull-through cache
# (harbor / nexus / docker's official registry / etc).
# Can be beneficial for larger dev/test environments (for example if you're getting rate limited by docker hub),
# or air-gapped environments where your nodes don't have internet access after the initial setup
# (which is still needed for downloading the k3s binary and such).
# k3s's documentation about private registries here: https://docs.k3s.io/installation/private-registry
custom_registries: false
# The registries can be authenticated or anonymous, depending on your registry server configuration.
# If they allow anonymous access, simply remove the following bit from custom_registries_yaml
#   configs:
#     "registry.domain.com":
#       auth:
#         username: yourusername
#         password: yourpassword
# The following is an example that pulls all images used in this playbook through your private registries.
# It also allows you to pull your own images from your private registry, without having to use imagePullSecrets
# in your deployments.
# If all you need is your own images and you don't care about caching the docker/quay/ghcr.io images,
# you can just remove those from the mirrors: section.
custom_registries_yaml: |
  mirrors:
    docker.io:
      endpoint:
        - "https://registry.domain.com/v2/dockerhub"
    quay.io:
      endpoint:
        - "https://registry.domain.com/v2/quayio"
    ghcr.io:
      endpoint:
        - "https://registry.domain.com/v2/ghcrio"
    registry.domain.com:
      endpoint:
        - "https://registry.domain.com"

  configs:
    "registry.domain.com":
      auth:
        username: yourusername
        password: yourpassword

# Only enable and configure these if you access the internet through a proxy
# proxy_env:
#   HTTP_PROXY: "http:https://proxy.domain.local:3128"
#   HTTPS_PROXY: "http:https://proxy.domain.local:3128"
#   NO_PROXY: "*.domain.local,127.0.0.0/8,10.0.0.0/8,172.16.0.0/12,192.168.0.0/16"

Hosts

inventory.yml

---
k3s_cluster:
  children:
    master:
      hosts:
        livepeer-ai:
          anisble_user: user
          ansible_port: 48207
          ansible_host: "redacted"
          ansible_ssh_private_key_file: "redacted"
          flannel_iface: enp1s0
    # agent:
    #   hosts:
    #     192.16.35.12:
    #     192.16.35.13:

  # Required Vars
  vars:
    ansible_port: 22
    ansible_user: user
    k3s_version: v1.26.9+k3s1
    token: "redacted"
    # api_endpoint: "redacted"
    extra_server_args: ""
    extra_agent_args: ""

Possible Solution

• I've checked the General Troubleshooting Guide

[iameli]

Oh oops, got this mixed up with the other k3s-ansible playbook, my bad!